<string lang="nn" key="CIPHER_TITLE">Krypterings Alternativer</string>

<string lang="nn" key="CLEAN_WINMRU_FAILED">ADVARSEL: Kunne ikkje fjerna stien til den sist valde volum/nøkkelfila (hugsa av fil veljar)!</string>

<string lang="nn" key="COMPRESSION_NOT_SUPPORTED">Feil: Kontainaren har vorte komprimert på filsystem nivå. VeraCrypt støttar ikkje komprimerte kontainerar (merk att komprimering av krypterte data er fåfengt og bortkasta).\n\nSlå av komprimering for kontainaren ved å fylja desse stega: 1) Høgre klikk på kontainaren i windows utforskaren (ikkje inne i VeraCrypt). 2) Vel 'Eigenskapar'. 3) Frå 'Eigenskapar' dialog boksen, klikk 'Avansert'. 4) I 'Avanserte Attributter' dialog boksen, deaktiver valet 'Komprimer innhold for å spare plass' og klikk 'OK'. 5) I 'Eigenskapar' dialog boksen, klikk 'OK'.</string>

<string lang="nn" key="DEVICE_IN_USE_FORMAT">ADVARSEL: Einheita/partisjonen er i bruk av opperativsystemet eller eit program. Å formatera einheiten/partisjonen kan føra til att data vert korrupte og systemet vert ustabilt.\n\nHaldfram?</string>

<string lang="en" key="DEVICE_IN_USE_INPLACE_ENC">Warning: The partition is in use by the operating system or applications. You should close any applications that might be using the partition (including antivirus software).\n\nContinue?</string>

<string lang="nn" key="FORMAT_CANT_DISMOUNT_FILESYS">Feil: Einheita/partisjonen inneheld eit filsystem som ikkje kunne demonterast. Filsystemet kan vera i bruk av opperativ systemet. Å formatera einheta/patisjonen vil nesten garantert føra til korupte data og ustabilt system.\n\nFor å løysa dette problemt , anbefallar me att du fyrst slettar partisjonen for så og oppretta den på nytt utan å formatera den. For å gjera dette, fylja desse stega: 1) Right-click the 'Computer' (or 'My Computer') icon in the 'Start Menu' and select 'Manage'. The 'Computer Management' window should appear. 2) In the 'Computer Management' window, select 'Storage' &gt; 'Disk Management'. 3) Right-click the partition you want to encrypt and select either 'Delete Partition', or 'Delete Volume', or 'Delete Logical Drive'. 4) Click 'Yes'. If Windows asks you to restart the computer, do so. Then repeat the steps 1 and 2 and continue from the step 5. 5) Right-click the unallocated/free space area and select either 'New Partition', or 'New Simple Volume', or 'New Logical Drive'. 6) The 'New Partition Wizard' or 'New Simple Volume Wizard' window should appear now; follow its instructions. On the wizard page entitled 'Format Partition', select either 'Do not format this partition' or 'Do not format this volume'. In the same wizard, click 'Next' and then 'Finish'. 7) Note that the device path you have selected in VeraCrypt may be wrong now. Therefore, exit the VeraCrypt Volume Creation Wizard (if it is still running) and then start it again. 8) Try encrypting the device/partition again.\n\nIf VeraCrypt repeatedly fails to encrypt the device/partition, you may want to consider creating a file container instead.</string>

<string lang="en" key="INPLACE_ENC_INVALID_PATH">Error: VeraCrypt can in-place encrypt only a partition, a dynamic volume, or an entire system drive. Please make sure the specified path is valid.</string>

<string lang="en" key="CANNOT_RESIZE_FILESYS">Error: Cannot shrink the filesystem (the filesystem needs to be shrunk to make space for the volume header and backup header).\n\nPossible causes and solutions:\n\n- Not enough free space on the volume. Please make sure no other application is writing to the filesystem.\n\n- Corrupted file system. Try to check it and fix any errors (right-click the corresponding drive letter in the 'Computer' list, then select Properties > Tools > 'Check Now', make sure the option 'Automatically fix file system errors' is enabled and click Start).\n\nIf the above steps do not help, please follow the below steps.</string>

<string lang="en" key="NOT_ENOUGH_FREE_FILESYS_SPACE_FOR_SHRINK">Error: There is not enough free space on the volume and so the filesystem cannot be shrunk (the filesystem needs to be shrunk to make space for the volume header and backup header).\n\nPlease delete any redundant files and empty the Recycle Bin so as to free at least 256 KB of space and then try again. Note that due to a Windows issue, the amount of free space reported by the Windows Explorer may be incorrect until the operating system is restarted. If restarting the system does not help, the file system may be corrupted. Try to check it and fix any errors (right-click the corresponding drive letter in the 'Computer' list, then select Properties > Tools > 'Check Now', make sure the option 'Automatically fix file system errors' is enabled and click Start).\n\nIf the above steps do not help, please follow the below steps.</string>

<string lang="nn" key="DRIVELETTERS">Kunne ikkje få tilgjengelege stasjons bokstavar.</string>

<string lang="en" key="DRIVER_NOT_FOUND">Error: VeraCrypt driver not found.\n\nPlease copy the files 'veracrypt.sys' and 'veracrypt-x64.sys' to the directory where the main VeraCrypt application (VeraCrypt.exe) is located.</string>

<string lang="en" key="DRIVER_VERSION">Error: An incompatible version of the VeraCrypt driver is currently running.\n\nIf you are trying to run VeraCrypt in portable mode (i.e. without installing it) and a different version of VeraCrypt is already installed, you must uninstall it first (or upgrade it using the VeraCrypt installer). To uninstall it, follow these steps: On Windows Vista or later, select 'Start Menu' > Computer > 'Uninstall or change a program' > VeraCrypt > Uninstall; on Windows XP, select 'Start Menu' > Settings > 'Control Panel' > 'Add Or Remove Programs' > VeraCrypt > Remove.\n\nSimilarly, if you are trying to run VeraCrypt in portable mode (i.e. without installing it) and a different version of VeraCrypt is already running in portable mode, you must restart the system first and then run only this new version.</string>

<string lang="nn" key="ERR_CIPHER_INIT_FAILURE">Feil: Cipher initialisering feila.</string>

<string lang="nn" key="ERR_CIPHER_INIT_WEAK_KEY">Feil: Ein svak nøkkel har vorte oppdaga! Prøv omatt.</string>

<string lang="en" key="EXCEPTION_REPORT_EXT">A critical error has occurred in your system, which requires VeraCrypt to be terminated.\n\nNote that this error has not been caused by VeraCrypt (so the VeraCrypt developers cannot fix it). Please, check your system for possible problems (e.g., system configuration, network connection, failing hardware components).</string>

<string lang="en" key="EXCEPTION_REPORT_EXT_FILESEL">A critical error has occurred in your system, which requires VeraCrypt to be terminated.\n\nIf this problem persists, you may want to try disabling or uninstalling applications that could potentially be causing this issue, such as antivirus or Internet security software, system "enhancers", "optimizers" or "tweakers", etc. If it does not help, you may want to try reinstalling your operating system (this problem may also be caused by malware).</string>

<string lang="nn" key="EXCEPTION_REPORT_TITLE">VeraCrypt kritisk feil</string>

<string lang="en" key="ERR_VOLUME_SIZE_TOO_SMALL">The volume size specified in the command line is too small. The volume can't be created.</string>

<string lang="en" key="ERR_VOLUME_SIZE_TOO_BIG">The volume size specified in the command line is too big. The volume can't be created.</string>

<string lang="en" key="INIT_SYS_ENC">Cannot initialize application components for system encryption.</string>

<string lang="nn" key="INIT_REGISTER">Kunne ikkje initialisera programmet. Klarte ikkje å registrera Dialog klassen.</string>

<string lang="en" key="INIT_RICHEDIT">Error: Failed to load the Rich Edit system library.</string>

<string lang="nn" key="INTRO_TITLE">VeraCrypt Volum Opprettings Vegvisar</string>

<string lang="en" key="SELECT_PKCS11_MODULE">Select PKCS #11 Library</string>

<string lang="nn" key="OUTOFMEMORY">Ikkje meir minne</string>

<string lang="en" key="FORMAT_DEVICE_FOR_ADVANCED_ONLY">IMPORTANT: We strongly recommend that inexperienced users create a VeraCrypt file container on the selected device/partition, instead of attempting to encrypt the entire device/partition.\n\nWhen you create a VeraCrypt file container (as opposed to encrypting a device or partition) there is, for example, no risk of destroying a large number of files. Note that a VeraCrypt file container (even though it contains a virtual encrypted disk) is actually just like any normal file. For more information, see the chapter Beginner's Tutorial in the VeraCrypt User Guide.\n\nAre you sure you want to encrypt the entire device/partition?</string>

<string lang="en" key="NONSYS_INPLACE_ENC_CONFIRM_BACKUP">WARNING: Please note that if power supply is suddenly interrupted while encrypting/decrypting existing data in place, or when the operating system crashes due to a software error or hardware malfunction while VeraCrypt is encrypting/decrypting existing data in place, portions of the data will be corrupted or lost. Therefore, before you start encrypting/decrypting, please make sure that you have backup copies of the files you want to encrypt/decrypt.\n\nDo you have such a backup?</string>

<string lang="en" key="OVERWRITEPROMPT_DEVICE_SECOND_WARNING_LOTS_OF_DATA">WARNING: THE SELECTED PARTITION CONTAINS A LARGE AMOUNT OF DATA! Any files stored on the partition will be erased and lost (they will NOT be encrypted)!</string>

<string lang="en" key="ERASE_FILES_BY_CREATING_VOLUME">Erase any files stored on the partition by creating a VeraCrypt volume within it</string>

<string lang="nn" key="PASSWORD">Passord</string>

<string lang="en" key="PASSWORD_WRONG_AUTOMOUNT">Auto-mount failed due to one or more of the following:\n - Incorrect password.\n - Incorrect Volume PIM number.\n - Incorrect PRF (hash).\n - No valid volume found.</string>

<string lang="en" key="PASSWORD_OR_KEYFILE_WRONG_AUTOMOUNT">Auto-mount failed due to one or more of the following:\n - Incorrect keyfile(s).\n - Incorrect password.\n - Incorrect Volume PIM number.\n - Incorrect PRF (hash).\n - No valid volume found.</string>

<string lang="nn" key="PASSWORD_WRONG_CAPSLOCK_ON">\n\nAdvarsel: Caps Lock er på. Dette kan føra til att du skriv inn passordet feil.</string>

<string lang="en" key="PIM_CHANGE_WARNING">Remember Number to Mount Volume</string>

<string lang="en" key="PIM_HIDVOL_HOST_TITLE">Outer Volume PIM</string>

<string lang="en" key="PIM_HIDVOL_TITLE">Hidden Volume PIM</string>

<string lang="en" key="CANT_DECRYPT_PARTITION_ON_ENTIRELY_ENCRYPTED_SYS_DRIVE_UNSURE">Warning: As the drive contains the VeraCrypt Boot Loader, it may be an entirely encrypted system drive. If it is, please note that VeraCrypt cannot decrypt an individual partition on an entirely encrypted system drive (you can decrypt only the entire system drive). If that is the case, you will be able to continue now but you will receive the 'Incorrect password' error message later.</string>

<string lang="en" key="PREV">&lt; &amp;Back</string>

<string lang="nn" key="RAWDEVICES">Kunne ikkje lista raw einingar installert på systemet ditt!</string>

<string lang="nn" key="SELECT_DEST_DIR">Vel destinasjons katalog</string>

<string lang="nn" key="SELECT_KEYFILE">Vel Nøkkelfil</string>

<string lang="nn" key="SELECT_KEYFILE_PATH">Vel ei nøkkelfil søke sti. ADVARSEL: merk att det er berre stien som vert hugsa, ikkje filnamna!</string>

<string lang="nn" key="TEST_CIPHERTEXT_SIZE">Test cipherteksten som du har valt er for kort eller lang.</string>

<string lang="nn" key="TEST_KEY_SIZE">Test nøkkelen som du har valt er for lang eller kort.</string>

<string lang="nn" key="TEST_PLAINTEXT_SIZE">Test klarteksten du har valt er for lang eller kort.</string>

<string lang="en" key="AUTORUN_MAY_NOT_ALWAYS_WORK">Note that, depending on the operating system configuration, these auto-run and auto-mount features may work only when the traveler disk files are created on a non-writable CD/DVD-like medium. Also note that this is not a bug in VeraCrypt (it is a limitation of Windows).</string>

<string lang="en" key="TRAVELER_DISK_CREATED">VeraCrypt traveler disk has been successfully created.\n\nNote that you need administrator privileges to run VeraCrypt in portable mode. Also note that, after examining the registry file, it may be possible to tell that VeraCrypt was run on a Windows system even if it is run in portable mode.</string>

<string lang="en" key="TC_TRAVELER_DISK">VeraCrypt Traveler Disk</string>

<string lang="en" key="TWOFISH_HELP">Designed by Bruce Schneier, John Kelsey, Doug Whiting, David Wagner, Chris Hall, and Niels Ferguson. Published in 1998. 256-bit key, 128-bit block. Mode of operation is XTS. Twofish was one of the AES finalists.</string>

<string lang="nn" key="UNKNOWN">Ukjent</string>

<string lang="en" key="ERR_UNKNOWN">An unspecified or unknown error occurred (%d).</string>

<string lang="nn" key="UNMOUNTALL_LOCK_FAILED">Eit eller anna volum inneheld filer som er i bruk av eit program eller system.\n\nTving demontering?</string>

<string lang="en" key="INSTALL_FAILED">Installation failed.</string>

<string lang="en" key="UNINSTALL_FAILED">Uninstallation failed.</string>

<string lang="en" key="DIST_PACKAGE_CORRUPTED">This distribution package is damaged. Please try downloading it again (preferably from the official VeraCrypt website at https://veracrypt.codeplex.com).</string>

<string lang="en" key="EXTRACTING_VERB">Extracting</string>

<string lang="en" key="CANNOT_READ_FROM_PACKAGE">Cannot read data from the package.</string>

<string lang="en" key="CANT_VERIFY_PACKAGE_INTEGRITY">Cannot verify the integrity of this distribution package.</string>

<string lang="en" key="SETUP_UPDATE_OK">VeraCrypt has been successfully updated.</string>

<string lang="en" key="UPGRADE_OK_REBOOT_REQUIRED">VeraCrypt has been successfully upgraded. However, before you can start using it, the computer must be restarted.\n\nDo you want to restart it now?</string>

<string lang="en" key="SYS_ENC_UPGRADE_FAILED">Failed to upgrade VeraCrypt!\n\nIMPORTANT: Before you shut down or restart the system, we strongly recommend that you use System Restore (Windows Start menu > All programs > Accessories > System Tools > System Restore) to restore your system to the restore point named 'VeraCrypt installation'. If System Restore is not available, you should try installing the original or the new version of VeraCrypt again before you shut down or restart the system.</string>

<string lang="nn" key="REMOVING_REG">Fjerner VeraCrypt register oppføringar</string>

<string lang="nn" key="ADDING_REG">Legg til register oppføring</string>

<string lang="nn" key="REMOVING_APPDATA">Fjernar program spesifikke data</string>

<string lang="nn" key="CREATING_SYS_RESTORE">Lag system gjennopprettings punkt</string>

<string lang="nn" key="FAILED_SYS_RESTORE">Kunne ikkje laga system gjennopprettings punkt!</string>

<string lang="en" key="INSTALLER_UPDATING_BOOT_LOADER">Updating boot loader</string>

<string lang="nn" key="INSTALL_COMPLETED">Installasjonen er fullført.</string>

<string lang="en" key="CLOSE_TC_FIRST">The VeraCrypt device driver cannot be unloaded.\n\nPlease close all open VeraCrypt windows first. If it does not help, please restart Windows and then try again.</string>

<string lang="nn" key="DISMOUNT_ALL_FIRST">Alle VeraCrypt volum må demonterast før du installerar eller avinstallerar VeraCrypt.</string>

<string lang="en" key="UNINSTALL_OLD_VERSION_FIRST">An obsolete version of VeraCrypt is currently installed on this system. It needs to be uninstalled before you can install this new version of VeraCrypt.\n\nAs soon as you close this message box, the uninstaller of the old version will be launched. Note that no volume will be decrypted when you uninstall VeraCrypt. After you uninstall the old version of VeraCrypt, run the installer of the new version of VeraCrypt again.</string>

<string lang="en" key="FAVORITE_LABEL_DEVICE_PATH_ERR">The device displayed below is neither a partition nor a dynamic volume. Therefore, no label can be assigned to it.</string>

<string lang="en" key="FAVORITE_LABEL_PARTITION_TYPE_ERR">Please set the type of the partition displayed below to a type recognized by Windows (use the SETID command of the Windows 'diskpart' tool). Then remove the partition from favorites and add it again. This will enable VeraCrypt to assign a label to the partition.</string>

<string lang="en" key="SYSTEM_FAVORITE_NETWORK_PATH_ERR">Due to a Windows limitation, a container stored in a remote filesystem shared over a network cannot be mounted as a system favorite volume (however, it can be mounted as a non-system favorite volume when a user logs on).</string>

<string lang="en" key="ENTER_PASSWORD_FOR_LABEL">Enter password for '%s'</string>

<string lang="en" key="ENTER_NORMAL_VOL_PASSWORD">Enter password for the normal/outer volume</string>

<string lang="en" key="ENTER_HIDDEN_VOL_PASSWORD">Enter password for the hidden volume</string>

<string lang="en" key="VOL_HEADER_BACKED_UP">Volume header backup has been successfully created.\n\nIMPORTANT: Restoring the volume header using this backup will also restore the current volume password. Moreover, if keyfile(s) are/is necessary to mount the volume, the same keyfile(s) will be necessary to mount the volume again when the volume header is restored.\n\nWARNING: This volume header backup may be used to restore the header ONLY of this particular volume. If you use this header backup to restore a header of a different volume, you will be able to mount the volume, but you will NOT be able to decrypt any data stored in the volume (because you will change its master key).</string>

<string lang="en" key="VOL_HEADER_RESTORED">The volume header has been successfully restored.\n\nIMPORTANT: Please note that an old password may have been restored as well. Moreover, if keyfile(s) were/was necessary to mount the volume when the backup was created, the same keyfile(s) are now necessary to mount the volume again.</string>

<string lang="en" key="EXTERNAL_VOL_HEADER_BAK_FIRST_INFO">For security reasons, you will have to enter the correct password (and/or supply the correct keyfiles) for the volume.\n\nNote: If the volume contains a hidden volume, you will have to enter the correct password (and/or supply the correct keyfiles) for the outer volume first. Afterwards, if you choose to back up the header of the hidden volume, you will have to enter the correct password (and/or supply the correct keyfiles) for the hidden volume.</string>

<string lang="en" key="DOES_VOLUME_CONTAIN_HIDDEN">Does the volume contain a hidden volume?</string>

<string lang="en" key="VOLUME_CONTAINS_HIDDEN">The volume contains a hidden volume</string>

<string lang="en" key="VOLUME_DOES_NOT_CONTAIN_HIDDEN">The volume does not contain a hidden volume</string>

<string lang="en" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to back up the header of the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the VeraCrypt Rescue Disk.\n\nDo you want to create a VeraCrypt Rescue Disk?</string>

<string lang="en" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to restore the header of a virtual VeraCrypt volume but you selected the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the VeraCrypt Rescue Disk.\n\nDo you want to create a VeraCrypt Rescue Disk?</string>

<string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new VeraCrypt Rescue Disk ISO image and the location where you wish to place it.</string>

<string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your VeraCrypt Rescue Disk into your CD/DVD drive and click OK to verify it.</string>

<string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">The VeraCrypt Rescue Disk has been successfully verified.</string>

<string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then try again. If this does not help, please try other CD/DVD recording software and/or medium.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created for a different master key, password, salt, etc., please note that such Rescue Disk will always fail this verification. To create a new Rescue Disk fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>

<string lang="en" key="FAILED_TO_INTERRUPT_WIPING">Error: Failed to interrupt the process of wiping.</string>

<string lang="en" key="FAILED_TO_RESUME_SYSTEM_ENCRYPTION">Error: Failed to resume the process of encryption/decryption of the system partition/drive.</string>

<string lang="en" key="FAILED_TO_START_WIPING">Error: Failed to start the process of wiping.</string>

<string lang="en" key="NO_SYS_ENC_PROCESS_TO_RESUME">There is no interrupted process of encryption/decryption of the system partition/drive to resume.\n\nNote: If you want to resume an interrupted process of encryption/decryption of a non-system partition/volume, select 'Volumes' &gt; 'Resume Interrupted Process'.</string>

<string lang="nn" key="HIDVOL_PROT_BKG_TASK_WARNING">ADVARSEL: VeraCrypt Bakgrunns oppgåve er deaktivert. Etter att du avsluttar VeraCrypt, vil du ikkje lenger få melding om skade på skjult volum er ungått.\n\nMerk: Du kan og slå av bakgrunns oppgåva kor tid som helst ved å høgre klikka på VeraCrypt systemstatus felt ikonet og vel 'Avslutt'.\n\n\nAktivera VeraCrypt bakgrunns oppgåve?</string>

<string lang="nn" key="LANG_PACK_VERSION">Språk pakke versjon: %s</string>

<string lang="en" key="WARN_64_BIT_BLOCK_CIPHER">Warning: This volume is encrypted with a legacy encryption algorithm.\n\nAll 64-bit-block encryption algorithms (e.g., Blowfish, CAST-128, or Triple DES) are deprecated. It will be possible to mount this volume using future versions of VeraCrypt. However, there will be no further enhancements to the implementations of these legacy encryption algorithms. We recommend that you create a new VeraCrypt volume encrypted with a 128-bit-block encryption algorithm (e.g., AES, Serpent, Twofish, etc.) and that you move all files from this volume to the new volume.</string>

<string lang="en" key="SYS_AUTOMOUNT_DISABLED">Your system is not configured to auto-mount new volumes. It may be impossible to mount device-hosted VeraCrypt volumes. Auto-mounting can be enabled by executing the following command and restarting the system.\n\nmountvol.exe /E</string>

<string lang="nn" key="SYS_ASSIGN_DRIVE_LETTER">Tildel ein stasjons bokstav til pertisjonen/einheiten før du held fram ('Kontrollpanel' &gt; 'System og Vedlikehold' &gt; 'Administrative Vertøy' - 'Lag og formater harddiskpartisjoner').\n\nMerk att dette er eit krav frå opperativ systemet.</string>

<string lang="en" key="KEYB_LAYOUT_SYS_ENC_EXPLANATION">Note: The password will need to be typed in the pre-boot environment (before Windows starts) where non-US Windows keyboard layouts are not available. Therefore, the password must always be typed using the standard US keyboard layout. However, it is important to note that you do NOT need a real US keyboard. VeraCrypt automatically ensures that you can safely type the password (right now and in the pre-boot environment) even if you do NOT have a real US keyboard.</string>

<string lang="en" key="RESCUE_DISK_INFO">Before you can encrypt the partition/drive, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition/drive before Windows starts.\n\n- The VRD will contain a backup of the present content of the first drive track (which typically contains a system loader or boot manager) and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ISO image will be created in the location specified below.</string>

<string lang="en" key="RESCUE_DISK_WIN_ISOBURN_PRELAUNCH_NOTE">After you click OK, Microsoft Windows Disc Image Burner will be launched. Please use it to burn the VeraCrypt Rescue Disk ISO image to a CD or DVD.\n\nAfter you do so, return to the VeraCrypt Volume Creation Wizard and follow its instructions.</string>

<string lang="en" key="RESCUE_DISK_BURN_INFO_NONWIN_ISO_BURNER">IMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software. If you do not have any CD/DVD recording software that can write the ISO disk image to a CD/DVD, click the link below to download such free software.\n\n</string>

<string lang="en" key="LAUNCH_WIN_ISOBURN">Launch Microsoft Windows Disc Image Burner</string>

<string lang="en" key="RESCUE_DISK_BURN_NO_CHECK_WARN">WARNING: If you already created a VeraCrypt Rescue Disk in the past, it cannot be reused for this system partition/drive because it was created for a different master key! Every time you encrypt a system partition/drive, you must create a new VeraCrypt Rescue Disk for it even if you use the same password.</string>