<string lang="en" key="LAUNCH_WIN_ISOBURN">Launch Microsoft Windows Disc Image Burner</string>

<string lang="en" key="RESCUE_DISK_BURN_NO_CHECK_WARN">WARNING: If you already created a VeraCrypt Rescue Disk in the past, it cannot be reused for this system partition/drive because it was created for a different master key! Every time you encrypt a system partition/drive, you must create a new VeraCrypt Rescue Disk for it even if you use the same password.</string>

<string lang="zh-tw" key="CANNOT_SAVE_SYS_ENCRYPTION_SETTINGS">錯誤：不能儲存系統加密設定。</string>

<string lang="zh-tw" key="CANNOT_INITIATE_SYS_ENCRYPTION_PRETEST">不能初始化系統加密預先測試。</string>

<string lang="en" key="CANNOT_INITIATE_HIDDEN_OS_CREATION">Cannot initiate the process of creation of the hidden operating system.</string>

<string lang="zh-tw" key="WIPE_MODE_TITLE">清除模式</string>

<string lang="en" key="INPLACE_ENC_WIPE_MODE_INFO">On some types of storage media, when data is overwritten with other data, it may be possible to recover the overwritten data using techniques such as magnetic force microscopy. This also applies to data that are overwritten with their encrypted form (which happens when VeraCrypt initially encrypts an unencrypted partition or drive). According to some studies and governmental publications, recovery of overwritten data can be prevented (or made very difficult) by overwritting the data with pseudorandom and certain non-random data a certain number of times. Therefore, if you believe that an adversary might be able to use such techniques to recover the data you intend encrypt, you may want to select one of the wipe modes (existing data will NOT be lost). Note that wiping will NOT be performed after the partition/drive is encrypted. When the partition/drive is fully encrypted, no unencrypted data is written to it. Any data being written to it is first encrypted on the fly in memory and only then is the (encrypted) data written to the disk.</string>

<string lang="en" key="WIPE_MODE_INFO">On some types of storage media, when data is overwritten with other data (e.g. when the data is erased), it may be possible to recover the overwritten data using techniques such as magnetic force microscopy. According to some studies and governmental publications, recovery of overwritten data can be prevented (or made very difficult) by overwritting the data with pseudorandom and certain non-random data a certain number of times. Therefore, if you believe that an adversary might be able to use such techniques to recover the data that is to be erased, you may want to select one of the multi-pass wipe modes.\n\nNote: The more wipe passes you use, the longer it takes to erase the data.</string>

<string lang="en" key="DEVICE_WIPE_PAGE_TITLE">Wiping</string>

<string lang="en" key="DEVICE_WIPE_PAGE_INFO_HIDDEN_OS">\nNote: You can interrupt the process of wiping, shut down your computer, start the hidden system again and then resume the process (this wizard will be launched automatically). However, if you interrupt it, the entire process of wiping will have to start from the beginning.</string>

<string lang="en" key="DEVICE_WIPE_PAGE_INFO">\n\nNote: If you interrupt the process of wiping and then attempt to resume it, the entire process will have to start from the beginning.</string>

<string lang="en" key="CONFIRM_WIPE_ABORT">Do you want to abort the process of wiping?</string>

<string lang="en" key="CONFIRM_WIPE_START">Warning: The entire content of the selected partition/device will be erased and lost.</string>

<string lang="en" key="CONFIRM_WIPE_START_DECOY_SYS_PARTITION">The entire content of the partition where the original system resides will be erased.\n\nNote: The entire content of the partition that is to be erased has been copied to this hidden system partition.</string>

<string lang="en" key="WIPE_MODE_WARN">WARNING: Note that when you choose e.g. the 3-pass wipe mode, the time necessary to encrypt the partition/drive will be up to 4 times longer. Likewise, if you choose the 35-pass wipe mode, it will be up to 36 times longer (it might even take several weeks).\n\nHowever, please note that wiping will NOT be performed after the partition/drive is fully encrypted. When the partition/drive is fully encrypted, no unencrypted data is written to it. Any data being written to it is first encrypted on the fly in memory and only then is the (encrypted) data written to the disk (so the performance will NOT be affected).\n\nAre you sure you want to use the wipe mode?</string>

<string lang="zh-tw" key="WIPE_MODE_NONE">無(最快)</string>

<string lang="en" key="WIPE_MODE_1_RAND">1-pass (random data)</string>

<string lang="zh-tw" key="WIPE_MODE_3_DOD_5220">3 次複寫(美國國防部 5220.22-M 演算法)</string>

<string lang="zh-tw" key="WIPE_MODE_7_DOD_5220">7 次複寫(美國國防部 5220.22-M 演算法)</string>

<string lang="en" key="WIPE_MODE_35_GUTMANN">35-pass ("Gutmann")</string>

<string lang="zh-tw" key="SYS_MULTI_BOOT_MODE_TITLE">作業系統數目</string>

<string lang="zh-tw" key="MULTI_BOOT_FOR_ADVANCED_ONLY">警告：經驗不足的使用者從不應該試圖在多重開機的組態設定下加密 Windows。\n\n要繼續嗎？</string>

<string lang="en" key="HIDDEN_OS_MULTI_BOOT">When creating/using a hidden operating system, VeraCrypt supports multi-boot configurations only when the following conditions are met:\n\n- The currently running operating system must be installed on the boot drive, which must not contain any other operating systems.\n\n- Operating systems installed on other drives must not use any boot loader residing on the drive on which the currently running operating system is installed.\n\nAre the above conditions met?</string>

<string lang="en" key="UNSUPPORTED_HIDDEN_OS_MULTI_BOOT_CFG">VeraCrypt does not support this multi-boot configuration when creating/using a hidden operating system.</string>

<string lang="zh-tw" key="SYSENC_MULTI_BOOT_SYS_EQ_BOOT_TITLE">啟動磁碟機</string>

<string lang="zh-tw" key="SYSENC_MULTI_BOOT_SYS_EQ_BOOT_HELP">目前執行的作業系統安裝到了啟動磁碟機上了嗎？\n\n注意：有時，Windows 可能沒有跟 Windows 開機管理程式(啟動分割區)安裝在同一個磁碟機上。如果是這種情況，選擇 "否"。</string>

<string lang="zh-tw" key="SYS_PARTITION_MUST_BE_ON_BOOT_DRIVE">VeraCrypt 目前不支援加密不是從安裝作業系統磁碟機開機的作業系統。</string>

<string lang="zh-tw" key="SYSENC_MULTI_BOOT_NBR_SYS_DRIVES_TITLE">系統磁碟機數目</string>

<string lang="zh-tw" key="SYSENC_MULTI_BOOT_NBR_SYS_DRIVES_HELP">有多少個磁碟機含有作業系統？\n\n注意：舉例來說，您在主要的磁碟機上安裝了作業系統(例如 Windows，Mac OS X，Linux，等等)又在第二個磁碟機上安裝了額外的作業系統，就選擇 "2 或更多"。</string>

<string lang="zh-tw" key="WDE_UNSUPPORTED_FOR_MULTIPLE_SYSTEMS_ON_ONE_DRIVE">VeraCrypt 目前不支援對整個包含多個作業系統磁碟機的加密。\n\n可能的解決方法：\n\n- 您可以回上一步並選只加密單一系統分割區(相對於去選加密整個系統磁碟機)。\n\n- 另外，如果把磁碟機中的其他系統移到其他的磁碟機只保留一個系統的話您將可以加密整個磁碟機。</string>

<string lang="zh-tw" key="SYSENC_MULTI_BOOT_ADJACENT_SYS_TITLE">多個系統在單一磁碟機中</string>

<string lang="zh-tw" key="SYSENC_MULTI_BOOT_ADJACENT_SYS_HELP">在目前執行的作業系統所安裝的磁碟機中，是否包含其他任何的作業系統？\n\n注意：例如目前執行的作業系統安裝在磁碟機 #0，該磁碟機包含了幾個分割區，其中一個分割區安裝 Windows 系統，而另一個分割區安裝了額外任何的作業系統(例如 Windows，Mac OS X，Linux，等等)，選擇 "是"。</string>

<string lang="zh-tw" key="SYSENC_MULTI_BOOT_NONWIN_BOOT_LOADER_TITLE">非 Windows 的開機管理程式</string>

<string lang="en" key="SYSENC_MULTI_BOOT_NONWIN_BOOT_LOADER_HELP">Is a non-Windows boot loader (or boot manager) installed in the master boot record (MBR)?\n\nNote: For example, if the first track of the boot drive contains GRUB, LILO, XOSL, or some other non-Windows boot manager (or boot loader), select 'Yes'.</string>

<string lang="zh-tw" key="SYSENC_MULTI_BOOT_OUTCOME_TITLE">多重開機</string>

<string lang="zh-tw" key="CUSTOM_BOOT_MANAGERS_IN_MBR_UNSUPPORTED">VeraCrypt 目前不支援是在主要啟動磁區中安裝非 Windows 的開機管理程式的多重開機組態設定。\n\n可能的解決辦法：\n\n- 如果您使用了一個啟動管理程式來開啟 Windows 和 Linux，把啟動管理程式(一般來說，GRUB)從主要啟動磁區移到一個分割區上。然後再啟動精靈來加密系統分割區/磁碟機。注意：VeraCrypt 開機管理程式將會成為主要的啟動管理程式，而且會允許您把原來的啟動管理程式(例如 GRUB)作為第二啟動管理程式來執行(經由在 VeraCrypt 開機管理程式畫面按下 'ESC' 鍵)，因此您仍然可以開啟 Linux。</string>

<string lang="en" key="WINDOWS_BOOT_LOADER_HINTS">If the currently running operating system is installed on the boot partition, then, after you encrypt it, you will need to enter the correct password even if you want to start any other unencrypted Windows system(s) (as they will share a single encrypted Windows boot loader/manager).\n\nIn contrast, if the currently running operating system is not installed on the boot partition (or if the Windows boot loader/manager is not used by any other system), then, after you encrypt this system, you will not need to enter the correct password to boot the other unencrypted system(s) -- you will only need to press the Esc key to start the unencrypted system (if there are multiple unencrypted systems, you will also need to choose which system to start in the VeraCrypt Boot Manager menu).\n\nNote: Typically, the earliest installed Windows system is installed on the boot partition.</string>

<string lang="en" key="SYSENC_PRE_DRIVE_ANALYSIS_TITLE">Encryption of Host Protected Area</string>

<string lang="en" key="SYSENC_PRE_DRIVE_ANALYSIS_HELP">At the end of many drives, there is an area that is normally hidden from the operating system (such areas are usually referred to as Host Protected Areas). However, some programs can read and write data from/to such areas.\n\nWARNING: Some computer manufacturers may use such areas to store tools and data for RAID, system recovery, system setup, diagnostic, or other purposes. If such tools or data must be accessible before booting, the hidden area should NOT be encrypted (choose 'No' above).\n\nDo you want VeraCrypt to detect and encrypt such a hidden area (if any) at the end of the system drive?</string>

<string lang="en" key="SYSENC_TYPE_PAGE_TITLE">Type of System Encryption</string>