-#include "XZip.h"

-#include "XUnzip.h"

- unsigned int maxRescueZipSize = 4 * 1024 * 1024;

- ZRESULT res;

- HZIP hz = CreateZip (0, maxRescueZipSize, ZIP_MEMORY);

- if (!hz)

- finally_do_arg (HZIP, hz, { CloseZip (finally_arg); });

- if (ZR_OK != ZipAdd (hz, L"EFI/Boot/bootx64.efi", DcsRescueImg, sizeDcsRescue, ZIP_MEMORY))

- if (ZR_OK !=ZipAdd (hz, L"EFI/VeraCrypt/DcsBml.dcs", BootMenuLockerImg, sizeBootMenuLocker, ZIP_MEMORY))

- if (ZR_OK != ZipAdd (hz, L"EFI/VeraCrypt/DcsBoot.efi", dcsBootImg, sizeDcsBoot, ZIP_MEMORY))

- if (ZR_OK != ZipAdd (hz, L"EFI/VeraCrypt/DcsCfg.dcs", dcsCfgImg, sizeDcsCfg, ZIP_MEMORY))

- if (ZR_OK != ZipAdd (hz, L"EFI/VeraCrypt/DcsInt.dcs", dcsIntImg, sizeDcsInt, ZIP_MEMORY))

- if (ZR_OK != ZipAdd (hz, L"EFI/VeraCrypt/LegacySpeaker.dcs", LegacySpeakerImg, sizeLegacySpeaker, ZIP_MEMORY))

- if (ZR_OK != ZipAdd (hz, L"EFI/VeraCrypt/svh_bak", volHeader.Ptr (), TC_BOOT_ENCRYPTION_VOLUME_HEADER_SIZE, ZIP_MEMORY))

- res = ZR_WRITE;

- Buffer fileBuf ((DWORD) fileSize);

- res = ZipAdd (hz, L"EFI/Boot/original_bootx64.vc_backup", fileBuf.Ptr (), sizeLoader, ZIP_MEMORY);

- if (res != ZR_OK)

- Buffer propBuf (fileSize);

- if (ZR_OK != ZipAdd (hz, L"EFI/VeraCrypt/DcsProp", propBuf.Ptr (), sizeDcsProp, ZIP_MEMORY))

- void* pZipContent = NULL;

- unsigned long ulZipSize = 0;

- if (ZR_OK != ZipGetMemory (hz, &pZipContent, &ulZipSize))

-

- memcpy (RescueZipData, pZipContent, ulZipSize);

- ZRESULT res;

- HZIP hz = OpenZip(RescueZipData, RescueZipSize, ZIP_MEMORY);

- if (!hz)

- finally_do_arg (HZIP, hz, { CloseZip (finally_arg); });

- int index, i;

- ZIPENTRYW ze;

- res = FindZipItemW (hz, efiFiles[i], true, &index, &ze);

- if ((res == ZR_OK) && (index >= 0))

- // check that the file exists on the disk and that it has the same content

- StringCbCopyW (szNameBuffer, sizeof (szNameBuffer), rootPath);

- StringCbCatW (szNameBuffer, sizeof (szNameBuffer), efiFiles[i]);

-

- try

- DWORD dwSize = 0;

- File diskFile (szNameBuffer, true);

- diskFile.CheckOpened (SRC_POS);

- diskFile.GetFileSize (dwSize);

- if (dwSize == (DWORD) ze.unc_size)

- Buffer fileBuf (dwSize);

- if (dwSize == diskFile.Read (fileBuf.Ptr (), dwSize))

- Buffer efiBuf (dwSize);

- res = UnzipItem (hz, ze.index, efiBuf.Ptr (), dwSize, ZIP_MEMORY);

- if (res == ZR_OK)

- bMatch = (memcmp (efiBuf.Ptr(), fileBuf.Ptr(), dwSize) == 0);

- }

- }

- }

- catch (...)

- {

-

- ZRESULT res;

- HZIP hzFile = OpenZip(rescueData.Ptr (), dwSize, ZIP_MEMORY);

- if (hzFile)

- finally_do_arg (HZIP, hzFile, { CloseZip (finally_arg); });

- HZIP hzMem = OpenZip(RescueZipData, RescueZipSize, ZIP_MEMORY);

- if (hzMem)

- {

- finally_do_arg (HZIP, hzMem, { CloseZip (finally_arg); });

- const wchar_t* efiFiles[] = {

- L"EFI/Boot/bootx64.efi",

- L"EFI/VeraCrypt/DcsBml.dcs",

- L"EFI/VeraCrypt/DcsBoot.efi",

- L"EFI/VeraCrypt/DcsCfg.dcs",

- L"EFI/VeraCrypt/DcsInt.dcs",

- L"EFI/VeraCrypt/LegacySpeaker.dcs",

- L"EFI/VeraCrypt/svh_bak",

- L"EFI/Boot/original_bootx64.vc_backup"

- };

-

- int index, i;

- ZIPENTRYW zeFile, zeMem;

- for (i = 0; i < ARRAYSIZE(efiFiles); i++)

- bool bMatch = false;

- res = FindZipItemW (hzMem, efiFiles[i], true, &index, &zeMem);

- if ((res == ZR_OK) && (index >= 0))

- res = FindZipItemW (hzFile, efiFiles[i], true, &index, &zeFile);

- if ((res == ZR_OK) && (index >= 0) && (zeMem.unc_size == zeFile.unc_size))

- Buffer fileBuf (zeFile.unc_size);

- Buffer memBuf (zeFile.unc_size);

-

- res = UnzipItem (hzMem, zeMem.index, memBuf.Ptr (), zeMem.unc_size, ZIP_MEMORY);

- if (res == ZR_OK)

- res = UnzipItem (hzFile, zeFile.index, fileBuf.Ptr (), zeFile.unc_size, ZIP_MEMORY);

- if (res == ZR_OK)

- bMatch = (memcmp (memBuf.Ptr (), fileBuf.Ptr (), zeMem.unc_size) == 0);

-

- }

- else

- {

- // entry not found in our internal Rescue ZIP image. Skip it.

- bMatch = true;

-

- if (!bMatch)

- break;

- }

-

- if (i == ARRAYSIZE(efiFiles))

- {

- // All entries processed

- return true;

- }

-// XUnzip.cpp Version 1.3

-//

-// Authors: Mark Adler et al. (see below)

-//

-// Modified by: Lucian Wischik

-// lu@wischik.com

-//

-// Version 1.0 - Turned C files into just a single CPP file

-// - Made them compile cleanly as C++ files

-// - Gave them simpler APIs

-// - Added the ability to zip/unzip directly in memory without

-// any intermediate files

-//

-// Modified by: Hans Dietrich

-// hdietrich@gmail.com

-//

-// Version 1.3: - Corrected size bug introduced by 1.2

-//

-// Version 1.2: - Many bug fixes. See CodeProject article for list.

-//

-// Version 1.1: - Added Unicode support to CreateZip() and ZipAdd()

-// - Changed file names to avoid conflicts with Lucian's files

-//

-///////////////////////////////////////////////////////////////////////////////

-//

-// Lucian Wischik's comments:

-// --------------------------

-// THIS FILE is almost entirely based upon code by Info-ZIP.

-// It has been modified by Lucian Wischik.

-// The original code may be found at http://www.info-zip.org

-// The original copyright text follows.

-//

-///////////////////////////////////////////////////////////////////////////////

-//

-// Original authors' comments:

-// ---------------------------

-// This is version 2002-Feb-16 of the Info-ZIP copyright and license. The

-// definitive version of this document should be available at

-// ftp://ftp.info-zip.org/pub/infozip/license.html indefinitely.

-//

-// Copyright (c) 1990-2002 Info-ZIP. All rights reserved.

-//

-// For the purposes of this copyright and license, "Info-ZIP" is defined as

-// the following set of individuals:

-//

-// Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois,

-// Jean-loup Gailly, Hunter Goatley, Ian Gorman, Chris Herborth, Dirk Haase,

-// Greg Hartwig, Robert Heath, Jonathan Hudson, Paul Kienitz,

-// David Kirschbaum, Johnny Lee, Onno van der Linden, Igor Mandrichenko,

-// Steve P. Miller, Sergio Monesi, Keith Owens, George Petrov, Greg Roelofs,

-// Kai Uwe Rommel, Steve Salisbury, Dave Smith, Christian Spieler,

-// Antoine Verheijen, Paul von Behren, Rich Wales, Mike White

-//

-// This software is provided "as is", without warranty of any kind, express

-// or implied. In no event shall Info-ZIP or its contributors be held liable

-// for any direct, indirect, incidental, special or consequential damages

-// arising out of the use of or inability to use this software.

-//

-// Permission is granted to anyone to use this software for any purpose,

-// including commercial applications, and to alter it and redistribute it

-// freely, subject to the following restrictions:

-//

-// 1. Redistributions of source code must retain the above copyright notice,

-// definition, disclaimer, and this list of conditions.

-//

-// 2. Redistributions in binary form (compiled executables) must reproduce

-// the above copyright notice, definition, disclaimer, and this list of

-// conditions in documentation and/or other materials provided with the

-// distribution. The sole exception to this condition is redistribution

-// of a standard UnZipSFX binary as part of a self-extracting archive;

-// that is permitted without inclusion of this license, as long as the

-// normal UnZipSFX banner has not been removed from the binary or disabled.

-//

-// 3. Altered versions--including, but not limited to, ports to new

-// operating systems, existing ports with new graphical interfaces, and

-// dynamic, shared, or static library versions--must be plainly marked

-// as such and must not be misrepresented as being the original source.

-// Such altered versions also must not be misrepresented as being

-// Info-ZIP releases--including, but not limited to, labeling of the

-// altered versions with the names "Info-ZIP" (or any variation thereof,

-// including, but not limited to, different capitalizations),

-// "Pocket UnZip", "WiZ" or "MacZip" without the explicit permission of

-// Info-ZIP. Such altered versions are further prohibited from

-// misrepresentative use of the Zip-Bugs or Info-ZIP e-mail addresses or

-// of the Info-ZIP URL(s).

-//

-// 4. Info-ZIP retains the right to use the names "Info-ZIP", "Zip", "UnZip",

-// "UnZipSFX", "WiZ", "Pocket UnZip", "Pocket Zip", and "MacZip" for its

-// own source and binary releases.

-//

-///////////////////////////////////////////////////////////////////////////////

-

-#ifndef _WIN64

-#define _USE_32BIT_TIME_T //+++1.2

-#endif

-

-

-#define STRICT

-#define WIN32_LEAN_AND_MEAN

-#include <windows.h>

-#include <time.h>

-#include <stdio.h>

-#include <stdlib.h>

-#include <string.h>

-#include <tchar.h>

-#include "XUnzip.h"

-

-#pragma warning(disable : 4996) // disable bogus deprecation warning

-

-// THIS FILE is almost entirely based upon code by Jean-loup Gailly

-// and Mark Adler. It has been modified by Lucian Wischik.

-// The original code may be found at http://www.gzip.org/zlib/

-// The original copyright text follows.

-//

-//

-//

-// zlib.h -- interface of the 'zlib' general purpose compression library

-// version 1.1.3, July 9th, 1998

-//

-// Copyright (C) 1995-1998 Jean-loup Gailly and Mark Adler

-//

-// This software is provided 'as-is', without any express or implied

-// warranty. In no event will the authors be held liable for any damages

-// arising from the use of this software.

-//

-// Permission is granted to anyone to use this software for any purpose,

-// including commercial applications, and to alter it and redistribute it

-// freely, subject to the following restrictions:

-//

-// 1. The origin of this software must not be misrepresented; you must not

-// claim that you wrote the original software. If you use this software

-// in a product, an acknowledgment in the product documentation would be

-// appreciated but is not required.

-// 2. Altered source versions must be plainly marked as such, and must not be

-// misrepresented as being the original software.

-// 3. This notice may not be removed or altered from any source distribution.

-//

-// Jean-loup Gailly Mark Adler

-// jloup@gzip.org madler@alumni.caltech.edu

-//

-//

-// The data format used by the zlib library is described by RFCs (Request for

-// Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt

-// (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).

-//

-//

-// The 'zlib' compression library provides in-memory compression and

-// decompression functions, including integrity checks of the uncompressed

-// data. This version of the library supports only one compression method

-// (deflation) but other algorithms will be added later and will have the same

-// stream interface.

-//

-// Compression can be done in a single step if the buffers are large

-// enough (for example if an input file is mmap'ed), or can be done by

-// repeated calls of the compression function. In the latter case, the

-// application must provide more input and/or consume the output

-// (providing more output space) before each call.

-//

-// The library also supports reading and writing files in gzip (.gz) format

-// with an interface similar to that of stdio.

-//

-// The library does not install any signal handler. The decoder checks

-// the consistency of the compressed data, so the library should never

-// crash even in case of corrupted input.

-//

-// for more info about .ZIP format, see ftp://ftp.cdrom.com/pub/infozip/doc/appnote-970311-iz.zip

-// PkWare has also a specification at ftp://ftp.pkware.com/probdesc.zip

-

-#define zmalloc(len) malloc(len)

-

-#define zfree(p) free(p)

-

-/*

-void *zmalloc(unsigned int len)

-{ char *buf = new char[len+32];

- for (int i=0; i<16; i++)

- { buf[i]=i;

- buf[len+31-i]=i;

- }

- *((unsigned int*)buf) = len;

- char c[1000]; wsprintf(c,"malloc 0x%lx - %lu",buf+16,len);

- OutputDebugString(c);

- return buf+16;

-}

-

-void zfree(void *buf)

-{ char c[1000]; wsprintf(c,"free 0x%lx",buf);

- OutputDebugString(c);

- char *p = ((char*)buf)-16;

- unsigned int len = *((unsigned int*)p);

- bool blown=false;

- for (int i=0; i<16; i++)

- { char lo = p[i];

- char hi = p[len+31-i];

- if (hi!=i || (lo!=i && i>4)) blown=true;

- }

- if (blown)

- { OutputDebugString("BLOWN!!!");

- }

- delete[] p;

-}

-*/

-

-#pragma warning(disable : 4702) // unreachable code

-

-static ZRESULT zopenerror = ZR_OK; //+++1.2

-

-typedef struct tm_unz_s

-{ unsigned int tm_sec; // seconds after the minute - [0,59]

- unsigned int tm_min; // minutes after the hour - [0,59]

- unsigned int tm_hour; // hours since midnight - [0,23]

- unsigned int tm_mday; // day of the month - [1,31]

- unsigned int tm_mon; // months since January - [0,11]

- unsigned int tm_year; // years - [1980..2044]

-} tm_unz;

-

-

-// unz_global_info structure contain global data about the ZIPfile

-typedef struct unz_global_info_s

-{ unsigned long number_entry; // total number of entries in the central dir on this disk

- unsigned long size_comment; // size of the global comment of the zipfile

-} unz_global_info;

-

-// unz_file_info contain information about a file in the zipfile

-typedef struct unz_file_info_s

-{ unsigned long version; // version made by 2 bytes

- unsigned long version_needed; // version needed to extract 2 bytes

- unsigned long flag; // general purpose bit flag 2 bytes

- unsigned long compression_method; // compression method 2 bytes

- unsigned long dosDate; // last mod file date in Dos fmt 4 bytes

- unsigned long crc; // crc-32 4 bytes

- unsigned long compressed_size; // compressed size 4 bytes

- unsigned long uncompressed_size; // uncompressed size 4 bytes

- unsigned long size_filename; // filename length 2 bytes

- unsigned long size_file_extra; // extra field length 2 bytes

- unsigned long size_file_comment; // file comment length 2 bytes

- unsigned long disk_num_start; // disk number start 2 bytes

- unsigned long internal_fa; // internal file attributes 2 bytes

- unsigned long external_fa; // external file attributes 4 bytes

- tm_unz tmu_date;

-} unz_file_info;

-

-

-#define UNZ_OK (0)

-#define UNZ_END_OF_LIST_OF_FILE (-100)

-#define UNZ_ERRNO (Z_ERRNO)

-#define UNZ_EOF (0)

-#define UNZ_PARAMERROR (-102)

-#define UNZ_BADZIPFILE (-103)

-#define UNZ_INTERNALERROR (-104)

-#define UNZ_CRCERROR (-105)

-

-

-

-

-

-

-

-#define ZLIB_VERSION "1.1.3"

-

-

-// Allowed flush values; see deflate() for details

-#define Z_NO_FLUSH 0

-#define Z_SYNC_FLUSH 2

-#define Z_FULL_FLUSH 3

-#define Z_FINISH 4

-

-

-// compression levels

-#define Z_NO_COMPRESSION 0

-#define Z_BEST_SPEED 1

-#define Z_BEST_COMPRESSION 9

-#define Z_DEFAULT_COMPRESSION (-1)

-

-// compression strategy; see deflateInit2() for details

-#define Z_FILTERED 1

-#define Z_HUFFMAN_ONLY 2

-#define Z_DEFAULT_STRATEGY 0

-

-// Possible values of the data_type field

-#define Z_BINARY 0

-#define Z_ASCII 1

-#define Z_UNKNOWN 2

-

-// The deflate compression method (the only one supported in this version)

-#define Z_DEFLATED 8

-

-// for initializing zalloc, zfree, opaque

-#define Z_NULL 0

-

-// case sensitivity when searching for filenames

-#define CASE_SENSITIVE 1

-#define CASE_INSENSITIVE 2

-

-

-// Return codes for the compression/decompression functions. Negative

-// values are errors, positive values are used for special but normal events.

-#define Z_OK 0

-#define Z_STREAM_END 1

-#define Z_NEED_DICT 2

-#define Z_ERRNO (-1)

-#define Z_STREAM_ERROR (-2)

-#define Z_DATA_ERROR (-3)

-#define Z_MEM_ERROR (-4)

-#define Z_BUF_ERROR (-5)

-#define Z_VERSION_ERROR (-6)

-

-

-

-// Basic data types

-typedef unsigned char Byte; // 8 bits

-typedef unsigned int uInt; // 16 bits or more

-typedef unsigned long uLong; // 32 bits or more

-typedef void *voidpf;

-typedef void *voidp;

-typedef long z_off_t;

-

-

-

-

-

-

-

-

-

-

-

-

-typedef voidpf (*alloc_func) (voidpf opaque, uInt items, uInt size);

-typedef void (*free_func) (voidpf opaque, voidpf address);

-

-struct internal_state;

-

-typedef struct z_stream_s {

- Byte *next_in; // next input byte

- uInt avail_in; // number of bytes available at next_in

- uLong total_in; // total nb of input bytes read so far

-

- Byte *next_out; // next output byte should be put there

- uInt avail_out; // remaining free space at next_out

- uLong total_out; // total nb of bytes output so far

-

- char *msg; // last error message, NULL if no error

- struct internal_state *state; // not visible by applications

-

- alloc_func zalloc; // used to allocate the internal state

- free_func zfree; // used to free the internal state

- voidpf opaque; // private data object passed to zalloc and zfree

-

- int data_type; // best guess about the data type: ascii or binary

- uLong adler; // adler32 value of the uncompressed data

- uLong reserved; // reserved for future use

-} z_stream;

-

-typedef z_stream *z_streamp;

-

-

-// The application must update next_in and avail_in when avail_in has

-// dropped to zero. It must update next_out and avail_out when avail_out

-// has dropped to zero. The application must initialize zalloc, zfree and

-// opaque before calling the init function. All other fields are set by the

-// compression library and must not be updated by the application.

-//

-// The opaque value provided by the application will be passed as the first

-// parameter for calls of zalloc and zfree. This can be useful for custom

-// memory management. The compression library attaches no meaning to the

-// opaque value.

-//

-// zalloc must return Z_NULL if there is not enough memory for the object.

-// If zlib is used in a multi-threaded application, zalloc and zfree must be

-// thread safe.

-//

-// The fields total_in and total_out can be used for statistics or

-// progress reports. After compression, total_in holds the total size of

-// the uncompressed data and may be saved for use in the decompressor

-// (particularly if the decompressor wants to decompress everything in

-// a single step).

-//

-

-

-// basic functions

-

-const char *zlibVersion ();

-// The application can compare zlibVersion and ZLIB_VERSION for consistency.

-// If the first character differs, the library code actually used is

-// not compatible with the zlib.h header file used by the application.

-// This check is automatically made by inflateInit.

-

-

-

-

-

-

-int inflate (z_streamp strm, int flush);

-//

-// inflate decompresses as much data as possible, and stops when the input

-// buffer becomes empty or the output buffer becomes full. It may some

-// introduce some output latency (reading input without producing any output)

-// except when forced to flush.

-//

-// The detailed semantics are as follows. inflate performs one or both of the

-// following actions:

-//

-// - Decompress more input starting at next_in and update next_in and avail_in

-// accordingly. If not all input can be processed (because there is not

-// enough room in the output buffer), next_in is updated and processing

-// will resume at this point for the next call of inflate().

-//

-// - Provide more output starting at next_out and update next_out and avail_out

-// accordingly. inflate() provides as much output as possible, until there

-// is no more input data or no more space in the output buffer (see below

-// about the flush parameter).

-//

-// Before the call of inflate(), the application should ensure that at least

-// one of the actions is possible, by providing more input and/or consuming

-// more output, and updating the next_* and avail_* values accordingly.

-// The application can consume the uncompressed output when it wants, for

-// example when the output buffer is full (avail_out == 0), or after each

-// call of inflate(). If inflate returns Z_OK and with zero avail_out, it

-// must be called again after making room in the output buffer because there

-// might be more output pending.

-//

-// If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much

-// output as possible to the output buffer. The flushing behavior of inflate is

-// not specified for values of the flush parameter other than Z_SYNC_FLUSH

-// and Z_FINISH, but the current implementation actually flushes as much output

-// as possible anyway.

-//

-// inflate() should normally be called until it returns Z_STREAM_END or an

-// error. However if all decompression is to be performed in a single step

-// (a single call of inflate), the parameter flush should be set to

-// Z_FINISH. In this case all pending input is processed and all pending

-// output is flushed; avail_out must be large enough to hold all the

-// uncompressed data. (The size of the uncompressed data may have been saved

-// by the compressor for this purpose.) The next operation on this stream must

-// be inflateEnd to deallocate the decompression state. The use of Z_FINISH

-// is never required, but can be used to inform inflate that a faster routine

-// may be used for the single inflate() call.

-//

-// If a preset dictionary is needed at this point (see inflateSetDictionary

-// below), inflate sets strm-adler to the adler32 checksum of the

-// dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise

-// it sets strm->adler to the adler32 checksum of all output produced

-// so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or

-// an error code as described below. At the end of the stream, inflate()

-// checks that its computed adler32 checksum is equal to that saved by the

-// compressor and returns Z_STREAM_END only if the checksum is correct.

-//

-// inflate() returns Z_OK if some progress has been made (more input processed

-// or more output produced), Z_STREAM_END if the end of the compressed data has

-// been reached and all uncompressed output has been produced, Z_NEED_DICT if a

-// preset dictionary is needed at this point, Z_DATA_ERROR if the input data was

-// corrupted (input stream not conforming to the zlib format or incorrect

-// adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent

-// (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not

-// enough memory, Z_BUF_ERROR if no progress is possible or if there was not

-// enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR

-// case, the application may then call inflateSync to look for a good

-// compression block.

-//

-

-

-int inflateEnd (z_streamp strm);

-//

-// All dynamically allocated data structures for this stream are freed.

-// This function discards any unprocessed input and does not flush any

-// pending output.

-//

-// inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state

-// was inconsistent. In the error case, msg may be set but then points to a

-// static string (which must not be deallocated).

-

- // Advanced functions

-

-// The following functions are needed only in some special applications.

-

-

-

-

-

-int inflateSetDictionary (z_streamp strm,

- const Byte *dictionary,

- uInt dictLength);

-//

-// Initializes the decompression dictionary from the given uncompressed byte

-// sequence. This function must be called immediately after a call of inflate

-// if this call returned Z_NEED_DICT. The dictionary chosen by the compressor

-// can be determined from the Adler32 value returned by this call of

-// inflate. The compressor and decompressor must use exactly the same

-// dictionary.

-//

-// inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a

-// parameter is invalid (such as NULL dictionary) or the stream state is

-// inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the

-// expected one (incorrect Adler32 value). inflateSetDictionary does not

-// perform any decompression: this will be done by subsequent calls of

-// inflate().

-

-

-int inflateSync (z_streamp strm);

-//

-// Skips invalid compressed data until a full flush point can be found, or until all

-// available input is skipped. No output is provided.

-//

-// inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR

-// if no more input was provided, Z_DATA_ERROR if no flush point has been found,

-// or Z_STREAM_ERROR if the stream structure was inconsistent. In the success

-// case, the application may save the current current value of total_in which

-// indicates where valid compressed data was found. In the error case, the

-// application may repeatedly call inflateSync, providing more input each time,

-// until success or end of the input data.

-

-

-int inflateReset (z_streamp strm);

-// This function is equivalent to inflateEnd followed by inflateInit,

-// but does not free and reallocate all the internal decompression state.

-// The stream will keep attributes that may have been set by inflateInit2.

-//

-// inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source

-// stream state was inconsistent (such as zalloc or state being NULL).

-//

-

-

-

-// checksum functions

-// These functions are not related to compression but are exported

-// anyway because they might be useful in applications using the

-// compression library.

-

-uLong adler32 (uLong adler, const Byte *buf, uInt len);

-// Update a running Adler-32 checksum with the bytes buf[0..len-1] and

-// return the updated checksum. If buf is NULL, this function returns

-// the required initial value for the checksum.

-// An Adler-32 checksum is almost as reliable as a CRC32 but can be computed

-// much faster. Usage example:

-//

-// uLong adler = adler32(0L, Z_NULL, 0);

-//

-// while (read_buffer(buffer, length) != EOF) {

-// adler = adler32(adler, buffer, length);

-// }

-// if (adler != original_adler) error();

-

-uLong ucrc32 (uLong crc, const Byte *buf, uInt len);

-// Update a running crc with the bytes buf[0..len-1] and return the updated

-// crc. If buf is NULL, this function returns the required initial value

-// for the crc. Pre- and post-conditioning (one's complement) is performed

-// within this function so it shouldn't be done by the application.

-// Usage example:

-//

-// uLong crc = crc32(0L, Z_NULL, 0);

-//

-// while (read_buffer(buffer, length) != EOF) {

-// crc = crc32(crc, buffer, length);

-// }

-// if (crc != original_crc) error();

-

-

-

-

-const char *zError (int err);

-int inflateSyncPoint (z_streamp z);

-const uLong *get_crc_table (void);

-

-

-

-typedef unsigned char uch;

-typedef uch uchf;

-typedef unsigned short ush;

-typedef ush ushf;

-typedef unsigned long ulg;

-

-

-

-const char * const z_errmsg[10] = { // indexed by 2-zlib_error

-"need dictionary", // Z_NEED_DICT 2

-"stream end", // Z_STREAM_END 1

-"", // Z_OK 0

-"file error", // Z_ERRNO (-1)

-"stream error", // Z_STREAM_ERROR (-2)

-"data error", // Z_DATA_ERROR (-3)

-"insufficient memory", // Z_MEM_ERROR (-4)

-"buffer error", // Z_BUF_ERROR (-5)

-"incompatible version",// Z_VERSION_ERROR (-6)

-""};

-

-

-#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]

-

-#define ERR_RETURN(strm,err) \

- return (strm->msg = (char*)ERR_MSG(err), (err))

-// To be used only when the state is known to be valid

-

- // common constants

-

-

-#define STORED_BLOCK 0

-#define STATIC_TREES 1

-#define DYN_TREES 2

-// The three kinds of block type

-

-#define MIN_MATCH 3

-#define MAX_MATCH 258

-// The minimum and maximum match lengths

-

-#define PRESET_DICT 0x20 // preset dictionary flag in zlib header

-

- // target dependencies

-

-#define OS_CODE 0x0b // Window 95 & Windows NT

-

-

-

- // functions

-

-#define zmemzero(dest, len) memset(dest, 0, len)

-

-// Diagnostic functions

-#undef Assert

-#undef Trace

-#undef Tracev

-#undef Tracevv

-#undef Tracec

-#undef Tracecv

-

-#ifdef DEBUG

-

- int z_verbose = 0;

- void z_error (char *m) {fprintf(stderr, "%s\n", m); exit(1);}

-

-#define Assert(cond,msg) {if(!(cond)) z_error(msg);}

-#define Trace(x) {if (z_verbose>=0) fprintf x ;}

-#define Tracev(x) {if (z_verbose>0) fprintf x ;}

-#define Tracevv(x) {if (z_verbose>1) fprintf x ;}

-#define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;}

-#define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;}

-

-#else

-

-#ifndef __noop

-#if _MSC_VER < 1300

-#define __noop ((void)0)

-#endif

-#endif

-

-#define Assert(cond,msg) __noop

-#define Trace(x) __noop

-#define Tracev(x) __noop

-#define Tracevv(x) __noop

-#define Tracec(c,x) __noop

-#define Tracecv(c,x) __noop

-

-#endif

-

-

-typedef uLong (*check_func) (uLong check, const Byte *buf, uInt len);

-voidpf zcalloc (voidpf opaque, unsigned items, unsigned size);

-void zcfree (voidpf opaque, voidpf ptr);

-

-#define ZALLOC(strm, items, size) \

- (*((strm)->zalloc))((strm)->opaque, (items), (size))

-#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))

-

-//void ZFREE(z_streamp strm,voidpf addr)

-//{ *((strm)->zfree))((strm)->opaque, addr);

-//}

-

-#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}

-

-

-

-

-// Huffman code lookup table entry--this entry is four bytes for machines

-// that have 16-bit pointers (e.g. PC's in the small or medium model).

-

-

-typedef struct inflate_huft_s inflate_huft;

-

-struct inflate_huft_s {

- union {

- struct {

- Byte Exop; // number of extra bits or operation

- Byte Bits; // number of bits in this code or subcode

- } what;

- uInt pad; // pad structure to a power of 2 (4 bytes for

- } word; // 16-bit, 8 bytes for 32-bit int's)

- uInt base; // literal, length base, distance base, or table offset

-};

-

-// Maximum size of dynamic tree. The maximum found in a long but non-

-// exhaustive search was 1004 huft structures (850 for length/literals

-// and 154 for distances, the latter actually the result of an

-// exhaustive search). The actual maximum is not known, but the

-// value below is more than safe.

-#define MANY 1440

-

-int inflate_trees_bits (

- uInt *, // 19 code lengths

- uInt *, // bits tree desired/actual depth

- inflate_huft * *, // bits tree result

- inflate_huft *, // space for trees

- z_streamp); // for messages

-

-int inflate_trees_dynamic (

- uInt, // number of literal/length codes

- uInt, // number of distance codes

- uInt *, // that many (total) code lengths

- uInt *, // literal desired/actual bit depth

- uInt *, // distance desired/actual bit depth

- inflate_huft * *, // literal/length tree result

- inflate_huft * *, // distance tree result

- inflate_huft *, // space for trees

- z_streamp); // for messages

-

-int inflate_trees_fixed (

- uInt *, // literal desired/actual bit depth

- uInt *, // distance desired/actual bit depth

- const inflate_huft * *, // literal/length tree result

- const inflate_huft * *, // distance tree result

- z_streamp); // for memory allocation

-

-

-

-

-

-struct inflate_blocks_state;

-typedef struct inflate_blocks_state inflate_blocks_statef;

-

-inflate_blocks_statef * inflate_blocks_new (

- z_streamp z,

- check_func c, // check function

- uInt w); // window size

-

-int inflate_blocks (

- inflate_blocks_statef *,

- z_streamp ,

- int); // initial return code

-

-void inflate_blocks_reset (

- inflate_blocks_statef *,

- z_streamp ,

- uLong *); // check value on output

-

-int inflate_blocks_free (

- inflate_blocks_statef *,

- z_streamp);

-

-void inflate_set_dictionary (

- inflate_blocks_statef *s,

- const Byte *d, // dictionary

- uInt n); // dictionary length

-

-int inflate_blocks_sync_point (

- inflate_blocks_statef *s);

-

-

-

-

-struct inflate_codes_state;

-typedef struct inflate_codes_state inflate_codes_statef;

-

-inflate_codes_statef *inflate_codes_new (

- uInt, uInt,

- const inflate_huft *, const inflate_huft *,

- z_streamp );

-

-int inflate_codes (

- inflate_blocks_statef *,

- z_streamp ,

- int);

-

-void inflate_codes_free (

- inflate_codes_statef *,

- z_streamp );

-

-

-

-

-typedef enum {

- IBM_TYPE, // get type bits (3, including end bit)

- IBM_LENS, // get lengths for stored

- IBM_STORED, // processing stored block

- IBM_TABLE, // get table lengths

- IBM_BTREE, // get bit lengths tree for a dynamic block

- IBM_DTREE, // get length, distance trees for a dynamic block

- IBM_CODES, // processing fixed or dynamic block

- IBM_DRY, // output remaining window bytes

- IBM_DONE, // finished last block, done

- IBM_BAD} // got a data error--stuck here

-inflate_block_mode;

-

-// inflate blocks semi-private state

-struct inflate_blocks_state {

-

- // mode

- inflate_block_mode mode; // current inflate_block mode

-

- // mode dependent information

- union {

- uInt left; // if STORED, bytes left to copy

- struct {

- uInt table; // table lengths (14 bits)

- uInt index; // index into blens (or border)

- uInt *blens; // bit lengths of codes

- uInt bb; // bit length tree depth

- inflate_huft *tb; // bit length decoding tree

- } trees; // if DTREE, decoding info for trees

- struct {

- inflate_codes_statef

- *codes;

- } decode; // if CODES, current state

- } sub; // submode

- uInt last; // true if this block is the last block

-

- // mode independent information

- uInt bitk; // bits in bit buffer

- uLong bitb; // bit buffer

- inflate_huft *hufts; // single malloc for tree space

- Byte *window; // sliding window

- Byte *end; // one byte after sliding window

- Byte *read; // window read pointer

- Byte *write; // window write pointer

- check_func checkfn; // check function

- uLong check; // check on output

-

-};

-

-

-// defines for inflate input/output

-// update pointers and return

-#define UPDBITS {s->bitb=b;s->bitk=k;}

-#define UPDIN {z->avail_in=n;z->total_in+=(uLong)(p-z->next_in);z->next_in=p;}

-#define UPDOUT {s->write=q;}

-#define UPDATE {UPDBITS UPDIN UPDOUT}

-#define LEAVE {UPDATE return inflate_flush(s,z,r);}

-// get bytes and bits

-#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;}

-#define NEEDBYTE {if(n)r=Z_OK;else LEAVE}

-#define NEXTBYTE (n--,*p++)

-#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}}

-#define DUMPBITS(j) {b>>=(j);k-=(j);}

-// output bytes

-#define WAVAIL (uInt)(q<s->read?s->read-q-1:s->end-q)

-#define LOADOUT {q=s->write;m=(uInt)WAVAIL;m;}

-#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}}

-#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT}

-#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;}

-#define OUTBYTE(a) {*q++=(Byte)(a);m--;}

-// load local pointers

-#define LOAD {LOADIN LOADOUT}

-

-// masks for lower bits (size given to avoid silly warnings with Visual C++)

-// And'ing with mask[n] masks the lower n bits

-const uInt inflate_mask[17] = {

- 0x0000,

- 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,

- 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff

-};

-

-// copy as much as possible from the sliding window to the output area

-int inflate_flush (inflate_blocks_statef *, z_streamp, int);

-

-int inflate_fast (uInt, uInt, const inflate_huft *, const inflate_huft *, inflate_blocks_statef *, z_streamp );

-

-

-

-const uInt fixed_bl = 9;

-const uInt fixed_bd = 5;

-const inflate_huft fixed_tl[] = {

- {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115},

- {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},192},

- {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},160},

- {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},224},

- {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},144},

- {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},208},

- {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},176},

- {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},240},

- {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227},

- {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},200},

- {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},168},

- {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},232},

- {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},152},

- {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},216},

- {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},184},

- {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},248},

- {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163},

- {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},196},

- {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},164},

- {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},228},

- {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},148},

- {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},212},

- {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},180},

- {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},244},

- {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0},

- {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},204},

- {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},172},

- {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},236},

- {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},156},

- {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},220},

- {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},188},

- {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},252},

- {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131},

- {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},194},

- {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},162},

- {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},226},

- {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},146},

- {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},210},

- {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},178},

- {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},242},

- {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258},

- {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},202},

- {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},170},

- {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},234},

- {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},154},

- {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},218},

- {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},186},

- {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},250},

- {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195},

- {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},198},

- {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},166},

- {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},230},

- {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},150},

- {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},214},

- {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},182},

- {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},246},

- {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0},

- {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},206},

- {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},174},

- {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},238},

- {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},158},

- {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},222},

- {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},190},

- {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},254},

- {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115},

- {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},193},

- {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},161},

- {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},225},

- {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},145},

- {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},209},

- {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},177},

- {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},241},

- {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227},

- {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},201},

- {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},169},

- {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},233},

- {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},153},

- {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},217},

- {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},185},

- {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},249},

- {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163},

- {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},197},

- {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},165},

- {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},229},

- {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},149},

- {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},213},

- {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},181},

- {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},245},

- {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0},

- {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},205},

- {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},173},

- {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},237},

- {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},157},

- {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},221},

- {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},189},

- {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},253},

- {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131},

- {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},195},

- {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},163},

- {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},227},

- {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},147},

- {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},211},

- {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},179},

- {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},243},

- {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258},

- {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},203},

- {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},171},

- {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},235},

- {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},155},

- {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},219},

- {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},187},

- {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},251},

- {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195},

- {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},199},

- {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},167},

- {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},231},

- {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},151},

- {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},215},

- {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},183},

- {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},247},

- {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0},

- {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},207},

- {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},175},

- {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},239},

- {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},159},

- {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},223},

- {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},191},

- {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},255}

- };

-const inflate_huft fixed_td[] = {

- {{{80,5}},1}, {{{87,5}},257}, {{{83,5}},17}, {{{91,5}},4097},

- {{{81,5}},5}, {{{89,5}},1025}, {{{85,5}},65}, {{{93,5}},16385},

- {{{80,5}},3}, {{{88,5}},513}, {{{84,5}},33}, {{{92,5}},8193},

- {{{82,5}},9}, {{{90,5}},2049}, {{{86,5}},129}, {{{192,5}},24577},

- {{{80,5}},2}, {{{87,5}},385}, {{{83,5}},25}, {{{91,5}},6145},

- {{{81,5}},7}, {{{89,5}},1537}, {{{85,5}},97}, {{{93,5}},24577},

- {{{80,5}},4}, {{{88,5}},769}, {{{84,5}},49}, {{{92,5}},12289},

- {{{82,5}},13}, {{{90,5}},3073}, {{{86,5}},193}, {{{192,5}},24577}

- };

-

-

-

-

-

-

-

-// copy as much as possible from the sliding window to the output area

-int inflate_flush(inflate_blocks_statef *s,z_streamp z,int r)

-{

- uInt n;

- Byte *p;

- Byte *q;

-

- // local copies of source and destination pointers

- p = z->next_out;

- q = s->read;

-

- // compute number of bytes to copy as far as end of window

- n = (uInt)((q <= s->write ? s->write : s->end) - q);

- if (n > z->avail_out) n = z->avail_out;

- if (n && r == Z_BUF_ERROR) r = Z_OK;

-

- // update counters

- z->avail_out -= n;

- z->total_out += n;

-

- // update check information

- if (s->checkfn != Z_NULL)

- z->adler = s->check = (*s->checkfn)(s->check, q, n);

-

- // copy as far as end of window

- if (n!=0) // check for n!=0 to avoid waking up CodeGuard

- { memcpy(p, q, n);

- p += n;

- q += n;

- }

-

- // see if more to copy at beginning of window

- if (q == s->end)

- {

- // wrap pointers

- q = s->window;

- if (s->write == s->end)

- s->write = s->window;

-

- // compute bytes to copy

- n = (uInt)(s->write - q);

- if (n > z->avail_out) n = z->avail_out;

- if (n && r == Z_BUF_ERROR) r = Z_OK;

-

- // update counters

- z->avail_out -= n;

- z->total_out += n;

-

- // update check information

- if (s->checkfn != Z_NULL)

- z->adler = s->check = (*s->checkfn)(s->check, q, n);

-

- // copy

- memcpy(p, q, n);

- p += n;

- q += n;

- }

-

- // update pointers

- z->next_out = p;

- s->read = q;

-

- // done

- return r;

-}

-

-

-

-

-

-

-// simplify the use of the inflate_huft type with some defines

-#define exop word.what.Exop

-#define bits word.what.Bits

-

-typedef enum { // waiting for "i:"=input, "o:"=output, "x:"=nothing

- START, // x: set up for LEN

- LEN, // i: get length/literal/eob next

- LENEXT, // i: getting length extra (have base)

- DIST, // i: get distance next

- DISTEXT, // i: getting distance extra

- COPY, // o: copying bytes in window, waiting for space

- LIT, // o: got literal, waiting for output space

- WASH, // o: got eob, possibly still output waiting

- END, // x: got eob and all data flushed

- BADCODE} // x: got error

-inflate_codes_mode;

-

-// inflate codes private state

-struct inflate_codes_state {

-

- // mode

- inflate_codes_mode mode; // current inflate_codes mode

-

- // mode dependent information

- uInt len;

- union {

- struct {

- const inflate_huft *tree; // pointer into tree

- uInt need; // bits needed

- } code; // if LEN or DIST, where in tree

- uInt lit; // if LIT, literal

- struct {

- uInt get; // bits to get for extra

- uInt dist; // distance back to copy from

- } copy; // if EXT or COPY, where and how much

- } sub; // submode

-

- // mode independent information

- Byte lbits; // ltree bits decoded per branch

- Byte dbits; // dtree bits decoder per branch

- const inflate_huft *ltree; // literal/length/eob tree

- const inflate_huft *dtree; // distance tree

-

-};

-

-

-inflate_codes_statef *inflate_codes_new(

-uInt bl, uInt bd,

-const inflate_huft *tl,

-const inflate_huft *td, // need separate declaration for Borland C++

-z_streamp z)

-{

- inflate_codes_statef *c;

-

- if ((c = (inflate_codes_statef *)

- ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL)

- {

- c->mode = START;

- c->lbits = (Byte)bl;

- c->dbits = (Byte)bd;

- c->ltree = tl;

- c->dtree = td;

- Tracev((stderr, "inflate: codes new\n"));

- }

- return c;

-}

-

-

-int inflate_codes(inflate_blocks_statef *s, z_streamp z, int r)

-{

- uInt j; // temporary storage

- const inflate_huft *t; // temporary pointer

- uInt e; // extra bits or operation

- uLong b; // bit buffer

- uInt k; // bits in bit buffer

- Byte *p; // input data pointer

- uInt n; // bytes available there

- Byte *q; // output window write pointer

- uInt m; // bytes to end of window or read pointer

- Byte *f; // pointer to copy strings from

- inflate_codes_statef *c = s->sub.decode.codes; // codes state

-

- // copy input/output information to locals (UPDATE macro restores)

- LOAD

-

- // process input and output based on current state

- for(;;) switch (c->mode)

- { // waiting for "i:"=input, "o:"=output, "x:"=nothing

- case START: // x: set up for LEN

-#ifndef SLOW

- if (m >= 258 && n >= 10)

- {

- UPDATE

- r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z);

- LOAD

- if (r != Z_OK)

- {

- c->mode = r == Z_STREAM_END ? WASH : BADCODE;

- break;

- }

- }

-#endif // !SLOW

- c->sub.code.need = c->lbits;

- c->sub.code.tree = c->ltree;

- c->mode = LEN;

- case LEN: // i: get length/literal/eob next

- j = c->sub.code.need;

- NEEDBITS(j)

- t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);

- DUMPBITS(t->bits)

- e = (uInt)(t->exop);

- if (e == 0) // literal

- {

- c->sub.lit = t->base;

- Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?

- "inflate: literal '%c'\n" :

- "inflate: literal 0x%02x\n", t->base));

- c->mode = LIT;

- break;

- }

- if (e & 16) // length

- {

- c->sub.copy.get = e & 15;

- c->len = t->base;

- c->mode = LENEXT;

- break;

- }

- if ((e & 64) == 0) // next table

- {

- c->sub.code.need = e;

- c->sub.code.tree = t + t->base;

- break;

- }

- if (e & 32) // end of block

- {

- Tracevv((stderr, "inflate: end of block\n"));

- c->mode = WASH;

- break;

- }

- c->mode = BADCODE; // invalid code

- z->msg = (char*)"invalid literal/length code";

- r = Z_DATA_ERROR;

- LEAVE

- case LENEXT: // i: getting length extra (have base)

- j = c->sub.copy.get;

- NEEDBITS(j)

- c->len += (uInt)b & inflate_mask[j];

- DUMPBITS(j)

- c->sub.code.need = c->dbits;

- c->sub.code.tree = c->dtree;

- Tracevv((stderr, "inflate: length %u\n", c->len));

- c->mode = DIST;

- case DIST: // i: get distance next

- j = c->sub.code.need;

- NEEDBITS(j)

- t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);

- DUMPBITS(t->bits)

- e = (uInt)(t->exop);

- if (e & 16) // distance

- {

- c->sub.copy.get = e & 15;

- c->sub.copy.dist = t->base;

- c->mode = DISTEXT;

- break;

- }

- if ((e & 64) == 0) // next table

- {

- c->sub.code.need = e;

- c->sub.code.tree = t + t->base;

- break;

- }

- c->mode = BADCODE; // invalid code

- z->msg = (char*)"invalid distance code";

- r = Z_DATA_ERROR;

- LEAVE

- case DISTEXT: // i: getting distance extra

- j = c->sub.copy.get;

- NEEDBITS(j)

- c->sub.copy.dist += (uInt)b & inflate_mask[j];

- DUMPBITS(j)

- Tracevv((stderr, "inflate: distance %u\n", c->sub.copy.dist));

- c->mode = COPY;

- case COPY: // o: copying bytes in window, waiting for space

- f = (uInt)(q - s->window) < c->sub.copy.dist ?

- s->end - (c->sub.copy.dist - (q - s->window)) :

- q - c->sub.copy.dist;

- while (c->len)

- {

- NEEDOUT

- OUTBYTE(*f++)

- if (f == s->end)

- f = s->window;

- c->len--;

- }

- c->mode = START;

- break;

- case LIT: // o: got literal, waiting for output space

- NEEDOUT

- OUTBYTE(c->sub.lit)

- c->mode = START;

- break;

- case WASH: // o: got eob, possibly more output

- if (k > 7) // return unused byte, if any

- {

- Assert(k < 16, "inflate_codes grabbed too many bytes");

- k -= 8;

- n++;

- p--; // can always return one

- }

- FLUSH

- if (s->read != s->write)

- LEAVE

- c->mode = END;

- case END:

- r = Z_STREAM_END;

- LEAVE

- case BADCODE: // x: got error

- r = Z_DATA_ERROR;

- LEAVE

- default:

- r = Z_STREAM_ERROR;

- LEAVE

- }

-}

-

-

-void inflate_codes_free(inflate_codes_statef *c,z_streamp z)

-{ ZFREE(z, c);

- Tracev((stderr, "inflate: codes free\n"));

-}

-

-

-

-// infblock.c -- interpret and process block types to last block

-// Copyright (C) 1995-1998 Mark Adler

-// For conditions of distribution and use, see copyright notice in zlib.h

-

-//struct inflate_codes_state {int dummy;}; // for buggy compilers

-

-

-

-// Table for deflate from PKZIP's appnote.txt.

-const uInt border[] = { // Order of the bit length code lengths

- 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};

-

-//

-// Notes beyond the 1.93a appnote.txt:

-//

-// 1. Distance pointers never point before the beginning of the output stream.

-// 2. Distance pointers can point back across blocks, up to 32k away.

-// 3. There is an implied maximum of 7 bits for the bit length table and

-// 15 bits for the actual data.

-// 4. If only one code exists, then it is encoded using one bit. (Zero

-// would be more efficient, but perhaps a little confusing.) If two

-// codes exist, they are coded using one bit each (0 and 1).

-// 5. There is no way of sending zero distance codes--a dummy must be

-// sent if there are none. (History: a pre 2.0 version of PKZIP would

-// store blocks with no distance codes, but this was discovered to be

-// too harsh a criterion.) Valid only for 1.93a. 2.04c does allow

-// zero distance codes, which is sent as one code of zero bits in

-// length.

-// 6. There are up to 286 literal/length codes. Code 256 represents the

-// end-of-block. Note however that the static length tree defines

-// 288 codes just to fill out the Huffman codes. Codes 286 and 287

-// cannot be used though, since there is no length base or extra bits

-// defined for them. Similarily, there are up to 30 distance codes.

-// However, static trees define 32 codes (all 5 bits) to fill out the

-// Huffman codes, but the last two had better not show up in the data.

-// 7. Unzip can check dynamic Huffman blocks for complete code sets.

-// The exception is that a single code would not be complete (see #4).

-// 8. The five bits following the block type is really the number of

-// literal codes sent minus 257.

-// 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits

-// (1+6+6). Therefore, to output three times the length, you output

-// three codes (1+1+1), whereas to output four times the same length,

-// you only need two codes (1+3). Hmm.

-//10. In the tree reconstruction algorithm, Code = Code + Increment

-// only if BitLength(i) is not zero. (Pretty obvious.)

-//11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19)

-//12. Note: length code 284 can represent 227-258, but length code 285

-// really is 258. The last length deserves its own, short code

-// since it gets used a lot in very redundant files. The length

-// 258 is special since 258 - 3 (the min match length) is 255.

-//13. The literal/length and distance code bit lengths are read as a

-// single stream of lengths. It is possible (and advantageous) for

-// a repeat code (16, 17, or 18) to go across the boundary between

-// the two sets of lengths.

-

-

-void inflate_blocks_reset(inflate_blocks_statef *s, z_streamp z, uLong *c)

-{

- if (c != Z_NULL)

- *c = s->check;

- if (s->mode == IBM_BTREE || s->mode == IBM_DTREE)

- ZFREE(z, s->sub.trees.blens);

- if (s->mode == IBM_CODES)

- inflate_codes_free(s->sub.decode.codes, z);

- s->mode = IBM_TYPE;

- s->bitk = 0;

- s->bitb = 0;

- s->read = s->write = s->window;

- if (s->checkfn != Z_NULL)

- z->adler = s->check = (*s->checkfn)(0L, (const Byte *)Z_NULL, 0);

- Tracev((stderr, "inflate: blocks reset\n"));

-}

-

-

-inflate_blocks_statef *inflate_blocks_new(z_streamp z, check_func c, uInt w)

-{

- inflate_blocks_statef *s;

-

- if ((s = (inflate_blocks_statef *)ZALLOC

- (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL)

- return s;

- if ((s->hufts =

- (inflate_huft *)ZALLOC(z, sizeof(inflate_huft), MANY)) == Z_NULL)

- {

- ZFREE(z, s);

- return Z_NULL;

- }

- if ((s->window = (Byte *)ZALLOC(z, 1, w)) == Z_NULL)

- {

- ZFREE(z, s->hufts);

- ZFREE(z, s);

- return Z_NULL;

- }

- s->end = s->window + w;

- s->checkfn = c;

- s->mode = IBM_TYPE;

- Tracev((stderr, "inflate: blocks allocated\n"));

- inflate_blocks_reset(s, z, Z_NULL);

- return s;

-}

-

-

-int inflate_blocks(inflate_blocks_statef *s, z_streamp z, int r)

-{

- uInt t; // temporary storage

- uLong b; // bit buffer

- uInt k; // bits in bit buffer

- Byte *p; // input data pointer

- uInt n; // bytes available there

- Byte *q; // output window write pointer

- uInt m; // bytes to end of window or read pointer

-

- // copy input/output information to locals (UPDATE macro restores)

- LOAD

-

- // process input based on current state

- for(;;) switch (s->mode)

- {

- case IBM_TYPE:

- NEEDBITS(3)

- t = (uInt)b & 7;

- s->last = t & 1;

- switch (t >> 1)

- {

- case 0: // stored

- Tracev((stderr, "inflate: stored block%s\n",

- s->last ? " (last)" : ""));

- DUMPBITS(3)

- t = k & 7; // go to byte boundary

- DUMPBITS(t)

- s->mode = IBM_LENS; // get length of stored block

- break;

- case 1: // fixed

- Tracev((stderr, "inflate: fixed codes block%s\n",

- s->last ? " (last)" : ""));

- {

- uInt bl, bd;

- const inflate_huft *tl, *td;

-

- inflate_trees_fixed(&bl, &bd, &tl, &td, z);

- s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z);

- if (s->sub.decode.codes == Z_NULL)

- {

- r = Z_MEM_ERROR;

- LEAVE

- }

- }

- DUMPBITS(3)

- s->mode = IBM_CODES;

- break;

- case 2: // dynamic

- Tracev((stderr, "inflate: dynamic codes block%s\n",

- s->last ? " (last)" : ""));

- DUMPBITS(3)

- s->mode = IBM_TABLE;

- break;

- case 3: // illegal

- DUMPBITS(3)

- s->mode = IBM_BAD;

- z->msg = (char*)"invalid block type";

- r = Z_DATA_ERROR;

- LEAVE

- }

- break;

- case IBM_LENS:

- NEEDBITS(32)

- if ((((~b) >> 16) & 0xffff) != (b & 0xffff))

- {

- s->mode = IBM_BAD;

- z->msg = (char*)"invalid stored block lengths";

- r = Z_DATA_ERROR;

- LEAVE

- }

- s->sub.left = (uInt)b & 0xffff;

- b = k = 0; // dump bits

- Tracev((stderr, "inflate: stored length %u\n", s->sub.left));

- s->mode = s->sub.left ? IBM_STORED : (s->last ? IBM_DRY : IBM_TYPE);

- break;

- case IBM_STORED:

- if (n == 0)

- LEAVE

- NEEDOUT

- t = s->sub.left;

- if (t > n) t = n;

- if (t > m) t = m;

- memcpy(q, p, t);

- p += t; n -= t;

- q += t; m -= t;

- if ((s->sub.left -= t) != 0)

- break;

- Tracev((stderr, "inflate: stored end, %lu total out\n",

- z->total_out + (q >= s->read ? q - s->read :

- (s->end - s->read) + (q - s->window))));

- s->mode = s->last ? IBM_DRY : IBM_TYPE;

- break;

- case IBM_TABLE:

- NEEDBITS(14)

- s->sub.trees.table = t = (uInt)b & 0x3fff;

- // remove this section to workaround bug in pkzip

- if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29)

- {

- s->mode = IBM_BAD;

- z->msg = (char*)"too many length or distance symbols";

- r = Z_DATA_ERROR;

- LEAVE

- }

- // end remove

- t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f);

- if ((s->sub.trees.blens = (uInt*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL)

- {

- r = Z_MEM_ERROR;

- LEAVE

- }

- DUMPBITS(14)

- s->sub.trees.index = 0;

- Tracev((stderr, "inflate: table sizes ok\n"));

- s->mode = IBM_BTREE;

- case IBM_BTREE:

- while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10))

- {

- NEEDBITS(3)

- s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7;

- DUMPBITS(3)

- }

- while (s->sub.trees.index < 19)

- s->sub.trees.blens[border[s->sub.trees.index++]] = 0;

- s->sub.trees.bb = 7;

- t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb,

- &s->sub.trees.tb, s->hufts, z);

- if (t != Z_OK)

- {

- ZFREE(z, s->sub.trees.blens);

- r = t;

- if (r == Z_DATA_ERROR)

- s->mode = IBM_BAD;

- LEAVE

- }

- s->sub.trees.index = 0;

- Tracev((stderr, "inflate: bits tree ok\n"));

- s->mode = IBM_DTREE;

- case IBM_DTREE:

- while (t = s->sub.trees.table,

- s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f))

- {

- inflate_huft *h;

- uInt i, j, c;

-

- t = s->sub.trees.bb;

- NEEDBITS(t)

- h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]);

- t = h->bits;

- c = h->base;

- if (c < 16)

- {

- DUMPBITS(t)

- s->sub.trees.blens[s->sub.trees.index++] = c;

- }

- else // c == 16..18

- {

- i = c == 18 ? 7 : c - 14;

- j = c == 18 ? 11 : 3;

- NEEDBITS(t + i)

- DUMPBITS(t)

- j += (uInt)b & inflate_mask[i];

- DUMPBITS(i)

- i = s->sub.trees.index;

- t = s->sub.trees.table;

- if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) ||

- (c == 16 && i < 1))

- {

- ZFREE(z, s->sub.trees.blens);

- s->mode = IBM_BAD;

- z->msg = (char*)"invalid bit length repeat";

- r = Z_DATA_ERROR;

- LEAVE

- }

- c = c == 16 ? s->sub.trees.blens[i - 1] : 0;

- do {

- s->sub.trees.blens[i++] = c;

- } while (--j);

- s->sub.trees.index = i;

- }

- }

- s->sub.trees.tb = Z_NULL;

- {

- uInt bl, bd;

- inflate_huft *tl, *td;

- inflate_codes_statef *c;

-

- bl = 9; // must be <= 9 for lookahead assumptions

- bd = 6; // must be <= 9 for lookahead assumptions

- t = s->sub.trees.table;

- t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f),

- s->sub.trees.blens, &bl, &bd, &tl, &td,

- s->hufts, z);

- ZFREE(z, s->sub.trees.blens);

- if (t != Z_OK)

- {

- if (t == (uInt)Z_DATA_ERROR)

- s->mode = IBM_BAD;

- r = t;

- LEAVE

- }

- Tracev((stderr, "inflate: trees ok\n"));

- if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL)

- {

- r = Z_MEM_ERROR;

- LEAVE

- }

- s->sub.decode.codes = c;

- }

- s->mode = IBM_CODES;

- case IBM_CODES:

- UPDATE

- if ((r = inflate_codes(s, z, r)) != Z_STREAM_END)

- return inflate_flush(s, z, r);

- r = Z_OK;

- inflate_codes_free(s->sub.decode.codes, z);

- LOAD

- Tracev((stderr, "inflate: codes end, %lu total out\n",

- z->total_out + (q >= s->read ? q - s->read :

- (s->end - s->read) + (q - s->window))));

- if (!s->last)

- {

- s->mode = IBM_TYPE;

- break;

- }

- s->mode = IBM_DRY;

- case IBM_DRY:

- FLUSH

- if (s->read != s->write)

- LEAVE

- s->mode = IBM_DONE;

- case IBM_DONE:

- r = Z_STREAM_END;

- LEAVE

- case IBM_BAD:

- r = Z_DATA_ERROR;

- LEAVE

- default:

- r = Z_STREAM_ERROR;

- LEAVE

- }

-}

-

-

-int inflate_blocks_free(inflate_blocks_statef *s, z_streamp z)

-{

- inflate_blocks_reset(s, z, Z_NULL);

- ZFREE(z, s->window);

- ZFREE(z, s->hufts);

- ZFREE(z, s);

- Tracev((stderr, "inflate: blocks freed\n"));

- return Z_OK;

-}

-

-

-

-// inftrees.c -- generate Huffman trees for efficient decoding

-// Copyright (C) 1995-1998 Mark Adler

-// For conditions of distribution and use, see copyright notice in zlib.h

-//

-

-

-

-extern const char inflate_copyright[] =

- " ";//inflate 1.1.3 Copyright 1995-1998 Mark Adler ";

-// If you use the zlib library in a product, an acknowledgment is welcome

-// in the documentation of your product. If for some reason you cannot

-// include such an acknowledgment, I would appreciate that you keep this

-// copyright string in the executable of your product.

-

-

-

-int huft_build (

- uInt *, // code lengths in bits

- uInt, // number of codes

- uInt, // number of "simple" codes

- const uInt *, // list of base values for non-simple codes

- const uInt *, // list of extra bits for non-simple codes

- inflate_huft **,// result: starting table

- uInt *, // maximum lookup bits (returns actual)

- inflate_huft *, // space for trees

- uInt *, // hufts used in space

- uInt * ); // space for values

-

-// Tables for deflate from PKZIP's appnote.txt.

-const uInt cplens[31] = { // Copy lengths for literal codes 257..285

- 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,

- 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};

- // see note #13 above about 258

-const uInt cplext[31] = { // Extra bits for literal codes 257..285

- 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,

- 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 112, 112}; // 112==invalid

-const uInt cpdist[30] = { // Copy offsets for distance codes 0..29

- 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,

- 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,

- 8193, 12289, 16385, 24577};

-const uInt cpdext[30] = { // Extra bits for distance codes

- 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,

- 7, 7, 8, 8, 9, 9, 10, 10, 11, 11,

- 12, 12, 13, 13};

-

-//

-// Huffman code decoding is performed using a multi-level table lookup.

-// The fastest way to decode is to simply build a lookup table whose

-// size is determined by the longest code. However, the time it takes

-// to build this table can also be a factor if the data being decoded

-// is not very long. The most common codes are necessarily the

-// shortest codes, so those codes dominate the decoding time, and hence

-// the speed. The idea is you can have a shorter table that decodes the

-// shorter, more probable codes, and then point to subsidiary tables for

-// the longer codes. The time it costs to decode the longer codes is

-// then traded against the time it takes to make longer tables.

-//

-// This results of this trade are in the variables lbits and dbits

-// below. lbits is the number of bits the first level table for literal/

-// length codes can decode in one step, and dbits is the same thing for

-// the distance codes. Subsequent tables are also less than or equal to

-// those sizes. These values may be adjusted either when all of the

-// codes are shorter than that, in which case the longest code length in

-// bits is used, or when the shortest code is *longer* than the requested

-// table size, in which case the length of the shortest code in bits is

-// used.

-//

-// There are two different values for the two tables, since they code a

-// different number of possibilities each. The literal/length table

-// codes 286 possible values, or in a flat code, a little over eight

-// bits. The distance table codes 30 possible values, or a little less

-// than five bits, flat. The optimum values for speed end up being

-// about one bit more than those, so lbits is 8+1 and dbits is 5+1.

-// The optimum values may differ though from machine to machine, and

-// possibly even between compilers. Your mileage may vary.

-//

-

-

-// If BMAX needs to be larger than 16, then h and x[] should be uLong.

-#define BMAX 15 // maximum bit length of any code

-

-int huft_build(

-uInt *b, // code lengths in bits (all assumed <= BMAX)

-uInt n, // number of codes (assumed <= 288)

-uInt s, // number of simple-valued codes (0..s-1)

-const uInt *d, // list of base values for non-simple codes

-const uInt *e, // list of extra bits for non-simple codes

-inflate_huft * *t, // result: starting table

-uInt *m, // maximum lookup bits, returns actual

-inflate_huft *hp, // space for trees

-uInt *hn, // hufts used in space

-uInt *v) // working area: values in order of bit length

-// Given a list of code lengths and a maximum table size, make a set of

-// tables to decode that set of codes. Return Z_OK on success, Z_BUF_ERROR

-// if the given code set is incomplete (the tables are still built in this

-// case), Z_DATA_ERROR if the input is invalid (an over-subscribed set of

-// lengths), or Z_MEM_ERROR if not enough memory.

-{

-

- uInt a; // counter for codes of length k

- uInt c[BMAX+1]; // bit length count table

- uInt f; // i repeats in table every f entries

- int g; // maximum code length

- int h; // table level

- register uInt i; // counter, current code

- register uInt j; // counter

- register int k; // number of bits in current code

- int l; // bits per table (returned in m)

- uInt mask; // (1 << w) - 1, to avoid cc -O bug on HP

- register uInt *p; // pointer into c[], b[], or v[]

- inflate_huft *q; // points to current table

- struct inflate_huft_s r; // table entry for structure assignment

- inflate_huft *u[BMAX]; // table stack

- register int w; // bits before this table == (l * h)

- uInt x[BMAX+1]; // bit offsets, then code stack

- uInt *xp; // pointer into x

- int y; // number of dummy codes added

- uInt z; // number of entries in current table

-

-

- // Generate counts for each bit length

- p = c;

-#define C0 *p++ = 0;

-#define C2 C0 C0 C0 C0

-#define C4 C2 C2 C2 C2

- C4; p; // clear c[]--assume BMAX+1 is 16

- p = b; i = n;

- do {

- c[*p++]++; // assume all entries <= BMAX

- } while (--i);

- if (c[0] == n) // null input--all zero length codes

- {

- *t = (inflate_huft *)Z_NULL;

- *m = 0;

- return Z_OK;

- }

-

-

- // Find minimum and maximum length, bound *m by those

- l = *m;

- for (j = 1; j <= BMAX; j++)

- if (c[j])

- break;

- k = j; // minimum code length

- if ((uInt)l < j)

- l = j;

- for (i = BMAX; i; i--)

- if (c[i])

- break;

- g = i; // maximum code length

- if ((uInt)l > i)

- l = i;

- *m = l;

-

-

- // Adjust last length count to fill out codes, if needed

- for (y = 1 << j; j < i; j++, y <<= 1)

- if ((y -= c[j]) < 0)

- return Z_DATA_ERROR;

- if ((y -= c[i]) < 0)

- return Z_DATA_ERROR;

- c[i] += y;

-

-

- // Generate starting offsets into the value table for each length

- x[1] = j = 0;

- p = c + 1; xp = x + 2;

- while (--i) { // note that i == g from above

- *xp++ = (j += *p++);

- }

-

-

- // Make a table of values in order of bit lengths

- p = b; i = 0;

- do {

- if ((j = *p++) != 0)

- v[x[j]++] = i;

- } while (++i < n);

- n = x[g]; // set n to length of v

-

-

- // Generate the Huffman codes and for each, make the table entries

- x[0] = i = 0; // first Huffman code is zero

- p = v; // grab values in bit order

- h = -1; // no tables yet--level -1

- w = -l; // bits decoded == (l * h)

- u[0] = (inflate_huft *)Z_NULL; // just to keep compilers happy

- q = (inflate_huft *)Z_NULL; // ditto

- z = 0; // ditto

-

- // go through the bit lengths (k already is bits in shortest code)

- for (; k <= g; k++)

- {

- a = c[k];

- while (a--)

- {

- // here i is the Huffman code of length k bits for value *p

- // make tables up to required level

- while (k > w + l)

- {

- h++;

- w += l; // previous table always l bits

-

- // compute minimum size table less than or equal to l bits

- z = g - w;

- z = z > (uInt)l ? l : z; // table size upper limit

- if ((f = 1 << (j = k - w)) > a + 1) // try a k-w bit table

- { // too few codes for k-w bit table

- f -= a + 1; // deduct codes from patterns left

- xp = c + k;

- if (j < z)

- while (++j < z) // try smaller tables up to z bits

- {

- if ((f <<= 1) <= *++xp)

- break; // enough codes to use up j bits

- f -= *xp; // else deduct codes from patterns

- }

- }

- z = 1 << j; // table entries for j-bit table

-

- // allocate new table

- if (*hn + z > MANY) // (note: doesn't matter for fixed)

- return Z_MEM_ERROR; // not enough memory

- u[h] = q = hp + *hn;

- *hn += z;

-

- // connect to last table, if there is one

- if (h)

- {

- x[h] = i; // save pattern for backing up

- r.bits = (Byte)l; // bits to dump before this table

- r.exop = (Byte)j; // bits in this table

- j = i >> (w - l);

- r.base = (uInt)(q - u[h-1] - j); // offset to this table

- u[h-1][j] = r; // connect to last table

- }

- else

- *t = q; // first table is returned result

- }

-

- // set up table entry in r

- r.bits = (Byte)(k - w);

- if (p >= v + n)

- r.exop = 128 + 64; // out of values--invalid code

- else if (*p < s)

- {

- r.exop = (Byte)(*p < 256 ? 0 : 32 + 64); // 256 is end-of-block

- r.base = *p++; // simple code is just the value

- }

- else

- {

- r.exop = (Byte)(e[*p - s] + 16 + 64);// non-simple--look up in lists

- r.base = d[*p++ - s];

- }

-

- // fill code-like entries with r

- f = 1 << (k - w);

- for (j = i >> w; j < z; j += f)

- q[j] = r;

-

- // backwards increment the k-bit code i

- for (j = 1 << (k - 1); i & j; j >>= 1)

- i ^= j;

- i ^= j;

-

- // backup over finished tables

- mask = (1 << w) - 1; // needed on HP, cc -O bug

- while ((i & mask) != x[h])

- {

- h--; // don't need to update q

- w -= l;

- mask = (1 << w) - 1;

- }

- }

- }

-

-

- // Return Z_BUF_ERROR if we were given an incomplete table

- return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK;

-}

-

-

-int inflate_trees_bits(

-uInt *c, // 19 code lengths

-uInt *bb, // bits tree desired/actual depth

-inflate_huft * *tb, // bits tree result

-inflate_huft *hp, // space for trees

-z_streamp z) // for messages

-{

- int r;

- uInt hn = 0; // hufts used in space

- uInt *v; // work area for huft_build

-

- if ((v = (uInt*)ZALLOC(z, 19, sizeof(uInt))) == Z_NULL)

- return Z_MEM_ERROR;

- r = huft_build(c, 19, 19, (uInt*)Z_NULL, (uInt*)Z_NULL,

- tb, bb, hp, &hn, v);

- if (r == Z_DATA_ERROR)

- z->msg = (char*)"oversubscribed dynamic bit lengths tree";

- else if (r == Z_BUF_ERROR || *bb == 0)

- {

- z->msg = (char*)"incomplete dynamic bit lengths tree";

- r = Z_DATA_ERROR;

- }

- ZFREE(z, v);

- return r;

-}

-

-

-int inflate_trees_dynamic(

-uInt nl, // number of literal/length codes

-uInt nd, // number of distance codes

-uInt *c, // that many (total) code lengths

-uInt *bl, // literal desired/actual bit depth

-uInt *bd, // distance desired/actual bit depth

-inflate_huft * *tl, // literal/length tree result

-inflate_huft * *td, // distance tree result

-inflate_huft *hp, // space for trees

-z_streamp z) // for messages

-{

- int r;

- uInt hn = 0; // hufts used in space

- uInt *v; // work area for huft_build

-

- // allocate work area

- if ((v = (uInt*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)

- return Z_MEM_ERROR;

-

- // build literal/length tree

- r = huft_build(c, nl, 257, cplens, cplext, tl, bl, hp, &hn, v);

- if (r != Z_OK || *bl == 0)

- {

- if (r == Z_DATA_ERROR)

- z->msg = (char*)"oversubscribed literal/length tree";

- else if (r != Z_MEM_ERROR)

- {

- z->msg = (char*)"incomplete literal/length tree";

- r = Z_DATA_ERROR;

- }

- ZFREE(z, v);

- return r;

- }

-

- // build distance tree

- r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, hp, &hn, v);

- if (r != Z_OK || (*bd == 0 && nl > 257))

- {

- if (r == Z_DATA_ERROR)

- z->msg = (char*)"oversubscribed distance tree";

- else if (r == Z_BUF_ERROR) {

- z->msg = (char*)"incomplete distance tree";

- r = Z_DATA_ERROR;

- }

- else if (r != Z_MEM_ERROR)

- {

- z->msg = (char*)"empty distance tree with lengths";

- r = Z_DATA_ERROR;

- }

- ZFREE(z, v);

- return r;

- }

-

- // done

- ZFREE(z, v);

- return Z_OK;

-}

-

-

-

-

-

-int inflate_trees_fixed(

-uInt *bl, // literal desired/actual bit depth

-uInt *bd, // distance desired/actual bit depth

-const inflate_huft * * tl, // literal/length tree result

-const inflate_huft * *td, // distance tree result

-z_streamp ) // for memory allocation

-{

- *bl = fixed_bl;

- *bd = fixed_bd;

- *tl = fixed_tl;

- *td = fixed_td;

- return Z_OK;

-}

-

-

-// inffast.c -- process literals and length/distance pairs fast

-// Copyright (C) 1995-1998 Mark Adler

-// For conditions of distribution and use, see copyright notice in zlib.h

-//

-

-

-//struct inflate_codes_state {int dummy;}; // for buggy compilers

-

-

-// macros for bit input with no checking and for returning unused bytes

-#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}}

-#define UNGRAB {c=z->avail_in-n;c=(k>>3)<c?k>>3:c;n+=c;p-=c;k-=c<<3;}

-

-// Called with number of bytes left to write in window at least 258

-// (the maximum string length) and number of input bytes available

-// at least ten. The ten bytes are six bytes for the longest length/

-// distance pair plus four bytes for overloading the bit buffer.

-

-int inflate_fast(

-uInt bl, uInt bd,

-const inflate_huft *tl,

-const inflate_huft *td, // need separate declaration for Borland C++

-inflate_blocks_statef *s,

-z_streamp z)

-{

- const inflate_huft *t; // temporary pointer

- uInt e; // extra bits or operation

- uLong b; // bit buffer

- uInt k; // bits in bit buffer

- Byte *p; // input data pointer

- uInt n; // bytes available there

- Byte *q; // output window write pointer

- uInt m; // bytes to end of window or read pointer

- uInt ml; // mask for literal/length tree

- uInt md; // mask for distance tree

- uInt c; // bytes to copy

- uInt d; // distance back to copy from

- Byte *r; // copy source pointer

-

- // load input, output, bit values

- LOAD

-

- // initialize masks

- ml = inflate_mask[bl];

- md = inflate_mask[bd];

-

- // do until not enough input or output space for fast loop

- do { // assume called with m >= 258 && n >= 10

- // get literal/length code

- GRABBITS(20) // max bits for literal/length code

- if ((e = (t = tl + ((uInt)b & ml))->exop) == 0)

- {

- DUMPBITS(t->bits)

- Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?

- "inflate: * literal '%c'\n" :

- "inflate: * literal 0x%02x\n", t->base));

- *q++ = (Byte)t->base;

- m--;

- continue;

- }

- for (;;) {

- DUMPBITS(t->bits)

- if (e & 16)

- {

- // get extra bits for length

- e &= 15;

- c = t->base + ((uInt)b & inflate_mask[e]);

- DUMPBITS(e)

- Tracevv((stderr, "inflate: * length %u\n", c));

-

- // decode distance base of block to copy

- GRABBITS(15); // max bits for distance code

- e = (t = td + ((uInt)b & md))->exop;

- for (;;) {

- DUMPBITS(t->bits)

- if (e & 16)

- {

- // get extra bits to add to distance base

- e &= 15;

- GRABBITS(e) // get extra bits (up to 13)

- d = t->base + ((uInt)b & inflate_mask[e]);

- DUMPBITS(e)

- Tracevv((stderr, "inflate: * distance %u\n", d));

-

- // do the copy

- m -= c;

- if ((uInt)(q - s->window) >= d) // offset before dest

- { // just copy

- r = q - d;

- *q++ = *r++; c--; // minimum count is three,

- *q++ = *r++; c--; // so unroll loop a little

- }

- else // else offset after destination

- {

- e = d - (uInt)(q - s->window); // bytes from offset to end

- r = s->end - e; // pointer to offset

- if (c > e) // if source crosses,

- {

- c -= e; // copy to end of window

- do {

- *q++ = *r++;

- } while (--e);

- r = s->window; // copy rest from start of window

- }

- }

- do { // copy all or what's left

- *q++ = *r++;

- } while (--c);

- break;

- }

- else if ((e & 64) == 0)

- {

- t += t->base;

- e = (t += ((uInt)b & inflate_mask[e]))->exop;

- }

- else

- {

- z->msg = (char*)"invalid distance code";

- UNGRAB

- UPDATE

- return Z_DATA_ERROR;

- }

- };

- break;

- }

- if ((e & 64) == 0)

- {

- t += t->base;

- if ((e = (t += ((uInt)b & inflate_mask[e]))->exop) == 0)

- {

- DUMPBITS(t->bits)

- Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?

- "inflate: * literal '%c'\n" :

- "inflate: * literal 0x%02x\n", t->base));

- *q++ = (Byte)t->base;

- m--;

- break;

- }

- }

- else if (e & 32)

- {

- Tracevv((stderr, "inflate: * end of block\n"));

- UNGRAB

- UPDATE

- return Z_STREAM_END;

- }

- else

- {

- z->msg = (char*)"invalid literal/length code";

- UNGRAB

- UPDATE

- return Z_DATA_ERROR;

- }

- };

- } while (m >= 258 && n >= 10);

-

- // not enough input or output--restore pointers and return

- UNGRAB

- UPDATE

- return Z_OK;

-}

-

-

-

-

-

-

-// crc32.c -- compute the CRC-32 of a data stream

-// Copyright (C) 1995-1998 Mark Adler

-// For conditions of distribution and use, see copyright notice in zlib.h

-

-// @(#) $Id$

-

-

-

-

-

-

-// Table of CRC-32's of all single-byte values (made by make_crc_table)

-const uLong crc_table[256] = {

- 0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L,

- 0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L,

- 0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L,

- 0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL,

- 0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L,

- 0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L,

- 0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L,

- 0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL,

- 0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L,

- 0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL,

- 0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L,

- 0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L,

- 0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L,

- 0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL,

- 0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL,

- 0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L,

- 0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL,

- 0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L,

- 0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L,

- 0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L,

- 0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL,

- 0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L,

- 0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L,

- 0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL,

- 0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L,

- 0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L,

- 0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L,

- 0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L,

- 0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L,

- 0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL,

- 0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL,

- 0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L,

- 0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L,

- 0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL,

- 0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL,

- 0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L,

- 0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL,

- 0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L,

- 0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL,

- 0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L,

- 0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL,

- 0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L,

- 0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L,

- 0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL,

- 0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L,

- 0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L,

- 0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L,

- 0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L,

- 0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L,

- 0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L,

- 0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL,

- 0x2d02ef8dL

-};

-

-const uLong * get_crc_table()

-{ return (const uLong *)crc_table;

-}

-

-#define CRC_DO1(buf) crc = crc_table[((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8);

-#define CRC_DO2(buf) CRC_DO1(buf); CRC_DO1(buf);

-#define CRC_DO4(buf) CRC_DO2(buf); CRC_DO2(buf);

-#define CRC_DO8(buf) CRC_DO4(buf); CRC_DO4(buf);

-

-uLong ucrc32(uLong crc, const Byte *buf, uInt len)

-{ if (buf == Z_NULL) return 0L;

- crc = crc ^ 0xffffffffL;

- while (len >= 8) {CRC_DO8(buf); len -= 8;}

- if (len) do {CRC_DO1(buf);} while (--len);

- return crc ^ 0xffffffffL;

-}

-

-

-// adler32.c -- compute the Adler-32 checksum of a data stream

-// Copyright (C) 1995-1998 Mark Adler

-// For conditions of distribution and use, see copyright notice in zlib.h

-

-// @(#) $Id$

-

-

-#define BASE 65521L // largest prime smaller than 65536

-#define NMAX 5552

-// NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1

-

-#define AD_DO1(buf,i) {s1 += buf[i]; s2 += s1;}

-#define AD_DO2(buf,i) AD_DO1(buf,i); AD_DO1(buf,i+1);

-#define AD_DO4(buf,i) AD_DO2(buf,i); AD_DO2(buf,i+2);

-#define AD_DO8(buf,i) AD_DO4(buf,i); AD_DO4(buf,i+4);

-#define AD_DO16(buf) AD_DO8(buf,0); AD_DO8(buf,8);

-

-// =========================================================================

-uLong adler32(uLong adler, const Byte *buf, uInt len)

-{

- unsigned long s1 = adler & 0xffff;

- unsigned long s2 = (adler >> 16) & 0xffff;

- int k;

-

- if (buf == Z_NULL) return 1L;

-

- while (len > 0) {

- k = len < NMAX ? len : NMAX;

- len -= k;

- while (k >= 16) {

- AD_DO16(buf);

- buf += 16;

- k -= 16;

- }

- if (k != 0) do {

- s1 += *buf++;

- s2 += s1;

- } while (--k);

- s1 %= BASE;

- s2 %= BASE;

- }

- return (s2 << 16) | s1;

-}

-

-

-

-// zutil.c -- target dependent utility functions for the compression library

-// Copyright (C) 1995-1998 Jean-loup Gailly.

-// For conditions of distribution and use, see copyright notice in zlib.h

-// @(#) $Id$

-

-

-

-

-

-

-const char * zlibVersion()

-{

- return ZLIB_VERSION;

-}

-

-// exported to allow conversion of error code to string for compress() and

-// uncompress()

-const char * zError(int err)

-{ return ERR_MSG(err);

-}

-

-

-

-

-voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)

-{

- if (opaque) items += size - size; // make compiler happy

- return (voidpf)calloc(items, size);

-}

-

-void zcfree (voidpf opaque, voidpf ptr)

-{

- zfree(ptr);

- if (opaque) return; // make compiler happy

-}

-

-

-

-// inflate.c -- zlib interface to inflate modules

-// Copyright (C) 1995-1998 Mark Adler

-// For conditions of distribution and use, see copyright notice in zlib.h

-

-//struct inflate_blocks_state {int dummy;}; // for buggy compilers

-

-typedef enum {

- IM_METHOD, // waiting for method byte

- IM_FLAG, // waiting for flag byte

- IM_DICT4, // four dictionary check bytes to go

- IM_DICT3, // three dictionary check bytes to go

- IM_DICT2, // two dictionary check bytes to go

- IM_DICT1, // one dictionary check byte to go

- IM_DICT0, // waiting for inflateSetDictionary

- IM_BLOCKS, // decompressing blocks

- IM_CHECK4, // four check bytes to go

- IM_CHECK3, // three check bytes to go

- IM_CHECK2, // two check bytes to go

- IM_CHECK1, // one check byte to go

- IM_DONE, // finished check, done

- IM_BAD} // got an error--stay here

-inflate_mode;

-

-// inflate private state

-struct internal_state {

-

- // mode

- inflate_mode mode; // current inflate mode

-

- // mode dependent information

- union {

- uInt method; // if IM_FLAGS, method byte

- struct {

- uLong was; // computed check value

- uLong need; // stream check value

- } check; // if CHECK, check values to compare

- uInt marker; // if IM_BAD, inflateSync's marker bytes count

- } sub; // submode

-

- // mode independent information

- int nowrap; // flag for no wrapper

- uInt wbits; // log2(window size) (8..15, defaults to 15)

- inflate_blocks_statef

- *blocks; // current inflate_blocks state

-

-};

-

-int inflateReset(z_streamp z)

-{

- if (z == Z_NULL || z->state == Z_NULL)

- return Z_STREAM_ERROR;

- z->total_in = z->total_out = 0;

- z->msg = Z_NULL;

- z->state->mode = z->state->nowrap ? IM_BLOCKS : IM_METHOD;

- inflate_blocks_reset(z->state->blocks, z, Z_NULL);

- Tracev((stderr, "inflate: reset\n"));

- return Z_OK;

-}

-

-int inflateEnd(z_streamp z)

-{

- if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL)

- return Z_STREAM_ERROR;

- if (z->state->blocks != Z_NULL)

- inflate_blocks_free(z->state->blocks, z);

- ZFREE(z, z->state);

- z->state = Z_NULL;

- Tracev((stderr, "inflate: end\n"));

- return Z_OK;

-}

-

-

-int inflateInit2(z_streamp z)

-{ const char *version = ZLIB_VERSION; int stream_size = sizeof(z_stream);

- if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || stream_size != sizeof(z_stream)) return Z_VERSION_ERROR;

-

- int w = -15; // MAX_WBITS: 32K LZ77 window.

- // Warning: reducing MAX_WBITS makes minigzip unable to extract .gz files created by gzip.

- // The memory requirements for deflate are (in bytes):

- // (1 << (windowBits+2)) + (1 << (memLevel+9))

- // that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values)

- // plus a few kilobytes for small objects. For example, if you want to reduce

- // the default memory requirements from 256K to 128K, compile with

- // make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"

- // Of course this will generally degrade compression (there's no free lunch).

- //

- // The memory requirements for inflate are (in bytes) 1 << windowBits

- // that is, 32K for windowBits=15 (default value) plus a few kilobytes

- // for small objects.

-

- // initialize state

- if (z == Z_NULL) return Z_STREAM_ERROR;

- z->msg = Z_NULL;

- if (z->zalloc == Z_NULL)

- {

- z->zalloc = zcalloc;

- z->opaque = (voidpf)0;

- }

- if (z->zfree == Z_NULL) z->zfree = zcfree;

- if ((z->state = (struct internal_state *)

- ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL)

- return Z_MEM_ERROR;

- z->state->blocks = Z_NULL;

-

- // handle undocumented nowrap option (no zlib header or check)

- z->state->nowrap = 0;

- if (w < 0)

- {

- w = - w;

- z->state->nowrap = 1;

- }

-

- // set window size

- if (w < 8 || w > 15)

- {

- inflateEnd(z);

- return Z_STREAM_ERROR;

- }

- z->state->wbits = (uInt)w;

-

- // create inflate_blocks state

- if ((z->state->blocks =

- inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, (uInt)1 << w))

- == Z_NULL)

- {

- inflateEnd(z);

- return Z_MEM_ERROR;

- }

- Tracev((stderr, "inflate: allocated\n"));

-

- // reset state

- inflateReset(z);

- return Z_OK;

-}

-

-

-

-#define IM_NEEDBYTE {if(z->avail_in==0)return r;r=f;}

-#define IM_NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++)

-

-int inflate(z_streamp z, int f)

-{

- int r;

- uInt b;

-

- if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL)

- return Z_STREAM_ERROR;

- f = f == Z_FINISH ? Z_BUF_ERROR : Z_OK;

- r = Z_BUF_ERROR;

- for (;;) switch (z->state->mode)

- {

- case IM_METHOD:

- IM_NEEDBYTE

- if (((z->state->sub.method = IM_NEXTBYTE) & 0xf) != Z_DEFLATED)

- {

- z->state->mode = IM_BAD;

- z->msg = (char*)"unknown compression method";

- z->state->sub.marker = 5; // can't try inflateSync

- break;

- }

- if ((z->state->sub.method >> 4) + 8 > z->state->wbits)

- {

- z->state->mode = IM_BAD;

- z->msg = (char*)"invalid window size";

- z->state->sub.marker = 5; // can't try inflateSync

- break;

- }

- z->state->mode = IM_FLAG;

- case IM_FLAG:

- IM_NEEDBYTE

- b = IM_NEXTBYTE;

- if (((z->state->sub.method << 8) + b) % 31)

- {

- z->state->mode = IM_BAD;

- z->msg = (char*)"incorrect header check";

- z->state->sub.marker = 5; // can't try inflateSync

- break;

- }

- Tracev((stderr, "inflate: zlib header ok\n"));

- if (!(b & PRESET_DICT))

- {

- z->state->mode = IM_BLOCKS;

- break;

- }

- z->state->mode = IM_DICT4;

- case IM_DICT4:

- IM_NEEDBYTE

- z->state->sub.check.need = (uLong)IM_NEXTBYTE << 24;

- z->state->mode = IM_DICT3;

- case IM_DICT3:

- IM_NEEDBYTE

- z->state->sub.check.need += (uLong)IM_NEXTBYTE << 16;

- z->state->mode = IM_DICT2;

- case IM_DICT2:

- IM_NEEDBYTE

- z->state->sub.check.need += (uLong)IM_NEXTBYTE << 8;

- z->state->mode = IM_DICT1;

- case IM_DICT1:

- IM_NEEDBYTE; r;

- z->state->sub.check.need += (uLong)IM_NEXTBYTE;

- z->adler = z->state->sub.check.need;

- z->state->mode = IM_DICT0;

- return Z_NEED_DICT;

- case IM_DICT0:

- z->state->mode = IM_BAD;

- z->msg = (char*)"need dictionary";

- z->state->sub.marker = 0; // can try inflateSync

- return Z_STREAM_ERROR;

- case IM_BLOCKS:

- r = inflate_blocks(z->state->blocks, z, r);

- if (r == Z_DATA_ERROR)

- {

- z->state->mode = IM_BAD;

- z->state->sub.marker = 0; // can try inflateSync

- break;

- }

- if (r == Z_OK)

- r = f;

- if (r != Z_STREAM_END)

- return r;

- r = f;

- inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);

- if (z->state->nowrap)

- {

- z->state->mode = IM_DONE;

- break;

- }

- z->state->mode = IM_CHECK4;

- case IM_CHECK4:

- IM_NEEDBYTE

- z->state->sub.check.need = (uLong)IM_NEXTBYTE << 24;

- z->state->mode = IM_CHECK3;

- case IM_CHECK3:

- IM_NEEDBYTE

- z->state->sub.check.need += (uLong)IM_NEXTBYTE << 16;

- z->state->mode = IM_CHECK2;

- case IM_CHECK2:

- IM_NEEDBYTE

- z->state->sub.check.need += (uLong)IM_NEXTBYTE << 8;

- z->state->mode = IM_CHECK1;

- case IM_CHECK1:

- IM_NEEDBYTE

- z->state->sub.check.need += (uLong)IM_NEXTBYTE;

-

- if (z->state->sub.check.was != z->state->sub.check.need)

- {

- z->state->mode = IM_BAD;

- z->msg = (char*)"incorrect data check";

- z->state->sub.marker = 5; // can't try inflateSync

- break;

- }

- Tracev((stderr, "inflate: zlib check ok\n"));

- z->state->mode = IM_DONE;

- case IM_DONE:

- return Z_STREAM_END;

- case IM_BAD:

- return Z_DATA_ERROR;

- default:

- return Z_STREAM_ERROR;

- }

-}

-

-

-

-#ifdef _UNICODE

-

-static int GetAnsiFileName(LPCWSTR name, char * buf, int nBufSize)

-{

- memset(buf, 0, nBufSize);

-

- int n = WideCharToMultiByte(CP_ACP, // code page

- 0, // performance and mapping flags

- name, // wide-character string

- -1, // number of chars in string

- buf, // buffer for new string

- nBufSize, // size of buffer

- NULL, // default for unmappable chars

- NULL); // set when default char used

- return n;

-}

-

-static int GetUnicodeFileName(const char * name, LPWSTR buf, int nBufSize)

-{

- memset(buf, 0, nBufSize*sizeof(TCHAR));

-

- int n = MultiByteToWideChar(CP_ACP, // code page

- 0, // character-type options

- name, // string to map

- -1, // number of bytes in string

- buf, // wide-character buffer

- nBufSize); // size of buffer

-

- return n;

-}

-

-#endif

-

-

-// unzip.c -- IO on .zip files using zlib

-// Version 0.15 beta, Mar 19th, 1998,

-// Read unzip.h for more info

-

-

-

-

-#define UNZ_BUFSIZE (16384)

-#define UNZ_MAXFILENAMEINZIP (256)

-#define SIZECENTRALDIRITEM (0x2e)

-#define SIZEZIPLOCALHEADER (0x1e)

-

-

-

-

-const char unz_copyright[] = " ";//unzip 0.15 Copyright 1998 Gilles Vollant ";

-

-// unz_file_info_interntal contain internal info about a file in zipfile

-typedef struct unz_file_info_internal_s

-{

- uLong offset_curfile;// relative offset of local header 4 bytes

-} unz_file_info_internal;

-

-

-typedef struct

-{ bool is_handle; // either a handle or memory

- bool canseek;

- // for handles:

- HANDLE h; bool herr; unsigned long initial_offset;

- // for memory:

- void *buf; unsigned int len,pos; // if it's a memory block

-} LUFILE;

-

-

-LUFILE *lufopen(void *z,unsigned int len,DWORD flags,ZRESULT *err)

-{

- if (flags!=ZIP_HANDLE && flags!=ZIP_FILENAME && flags!=ZIP_MEMORY)

- {

- *err=ZR_ARGS;

- return NULL;

- }

- //

- HANDLE h=0; bool canseek=false; *err=ZR_OK;

- if (flags==ZIP_HANDLE||flags==ZIP_FILENAME)

- {

- if (flags==ZIP_HANDLE)

- {

- HANDLE hf = z;

-

- BOOL res = DuplicateHandle(GetCurrentProcess(),hf,GetCurrentProcess(),&h,0,FALSE,DUPLICATE_SAME_ACCESS);

-

- if (!res)

- {

- *err=ZR_NODUPH;

- return NULL;

- }

- }

- else

- {

- h = CreateFile((const TCHAR *)z, GENERIC_READ, FILE_SHARE_READ,

- NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL);

-

- if (h == INVALID_HANDLE_VALUE)

- {

- *err = ZR_NOFILE;

- return NULL;

- }

- }

- DWORD type = GetFileType(h);

- canseek = (type==FILE_TYPE_DISK);

- }

- LUFILE *lf = new LUFILE;

- if (flags==ZIP_HANDLE||flags==ZIP_FILENAME)

- {

- lf->is_handle=true;

- lf->canseek=canseek;

- lf->h=h; lf->herr=false;

- lf->initial_offset=0;

- if (canseek)

- lf->initial_offset = SetFilePointer(h,0,NULL,FILE_CURRENT);

- }

- else

- {

- lf->is_handle=false;

- lf->canseek=true;

- lf->buf=z;

- lf->len=len;

- lf->pos=0;

- lf->initial_offset=0;

- }

- *err=ZR_OK;

- return lf;

-}

-

-

-int lufclose(LUFILE *stream)

-{ if (stream==NULL) return EOF;

- if (stream->is_handle) CloseHandle(stream->h);

- delete stream;

- return 0;

-}

-

-int luferror(LUFILE *stream)

-{ if (stream->is_handle && stream->herr) return 1;

- else return 0;

-}

-

-long int luftell(LUFILE *stream)

-{ if (stream->is_handle && stream->canseek) return SetFilePointer(stream->h,0,NULL,FILE_CURRENT)-stream->initial_offset;

- else if (stream->is_handle) return 0;

- else return stream->pos;

-}

-

-int lufseek(LUFILE *stream, long offset, int whence)

-{ if (stream->is_handle && stream->canseek)

- { if (whence==SEEK_SET) SetFilePointer(stream->h,stream->initial_offset+offset,0,FILE_BEGIN);

- else if (whence==SEEK_CUR) SetFilePointer(stream->h,offset,NULL,FILE_CURRENT);

- else if (whence==SEEK_END) SetFilePointer(stream->h,offset,NULL,FILE_END);

- else return 19; // EINVAL

- return 0;

- }

- else if (stream->is_handle) return 29; // ESPIPE

- else

- { if (whence==SEEK_SET) stream->pos=offset;

- else if (whence==SEEK_CUR) stream->pos+=offset;

- else if (whence==SEEK_END) stream->pos=stream->len+offset;

- return 0;

- }

-}

-

-

-size_t lufread(void *ptr,size_t size,size_t n,LUFILE *stream)

-{ unsigned int toread = (unsigned int)(size*n);

- if (stream->is_handle)

- { DWORD red; BOOL res = ReadFile(stream->h,ptr,toread,&red,NULL);

- if (!res) stream->herr=true;

- return red/size;

- }

- if (stream->pos+toread > stream->len) toread = stream->len-stream->pos;

- memcpy(ptr, (char*)stream->buf + stream->pos, toread); DWORD red = toread;

- stream->pos += red;

- return red/size;

-}

-

-

-

-

-// file_in_zip_read_info_s contain internal information about a file in zipfile,

-// when reading and decompress it

-typedef struct

-{

- char *read_buffer; // internal buffer for compressed data

- z_stream stream; // zLib stream structure for inflate

-

- uLong pos_in_zipfile; // position in byte on the zipfile, for fseek

- uLong stream_initialised; // flag set if stream structure is initialised

-

- uLong offset_local_extrafield;// offset of the local extra field

- uInt size_local_extrafield;// size of the local extra field

- uLong pos_local_extrafield; // position in the local extra field in read

-

- uLong crc32; // crc32 of all data uncompressed

- uLong crc32_wait; // crc32 we must obtain after decompress all

- uLong rest_read_compressed; // number of byte to be decompressed

- uLong rest_read_uncompressed;//number of byte to be obtained after decomp

- LUFILE* file; // io structore of the zipfile

- uLong compression_method; // compression method (0==store)

- uLong byte_before_the_zipfile;// byte before the zipfile, (>0 for sfx)

-} file_in_zip_read_info_s;

-

-

-// unz_s contain internal information about the zipfile

-typedef struct

-{

- LUFILE* file; // io structore of the zipfile

- unz_global_info gi; // public global information

- uLong byte_before_the_zipfile;// byte before the zipfile, (>0 for sfx)

- uLong num_file; // number of the current file in the zipfile

- uLong pos_in_central_dir; // pos of the current file in the central dir

- uLong current_file_ok; // flag about the usability of the current file

- uLong central_pos; // position of the beginning of the central dir

-

- uLong size_central_dir; // size of the central directory

- uLong offset_central_dir; // offset of start of central directory with respect to the starting disk number

-

- unz_file_info cur_file_info; // public info about the current file in zip

- unz_file_info_internal cur_file_info_internal; // private info about it

- file_in_zip_read_info_s* pfile_in_zip_read; // structure about the current file if we are decompressing it

-} unz_s, *unzFile;

-

-

-int unzStringFileNameCompare (const char* fileName1,const char* fileName2,int iCaseSensitivity);

-// Compare two filename (fileName1,fileName2).

-

-z_off_t unztell (unzFile file);

-// Give the current position in uncompressed data

-

-int unzeof (unzFile file);

-// return 1 if the end of file was reached, 0 elsewhere

-

-int unzGetLocalExtrafield (unzFile file, voidp buf, unsigned len);

-// Read extra field from the current file (opened by unzOpenCurrentFile)

-// This is the local-header version of the extra field (sometimes, there is

-// more info in the local-header version than in the central-header)

-//

-// if buf==NULL, it return the size of the local extra field

-//

-// if buf!=NULL, len is the size of the buffer, the extra header is copied in

-// buf.

-// the return value is the number of bytes copied in buf, or (if <0)

-// the error code

-

-

-

-// ===========================================================================

-// Read a byte from a gz_stream; update next_in and avail_in. Return EOF

-// for end of file.

-// IN assertion: the stream s has been sucessfully opened for reading.

-

-int unzlocal_getByte(LUFILE *fin,int *pi)

-{ unsigned char c;

- int err = (int)lufread(&c, 1, 1, fin);

- if (err==1)

- { *pi = (int)c;

- return UNZ_OK;

- }

- else

- { if (luferror(fin)) return UNZ_ERRNO;

- else return UNZ_EOF;

- }

-}

-

-

-// ===========================================================================

-// Reads a long in LSB order from the given gz_stream. Sets

-int unzlocal_getShort (LUFILE *fin,uLong *pX)

-{

- uLong x ;

- int i;

- int err;

-

- err = unzlocal_getByte(fin,&i);

- x = (uLong)i;

-

- if (err==UNZ_OK)

- err = unzlocal_getByte(fin,&i);

- x += ((uLong)i)<<8;

-

- if (err==UNZ_OK)

- *pX = x;

- else

- *pX = 0;

- return err;

-}

-

-int unzlocal_getLong (LUFILE *fin,uLong *pX)

-{

- uLong x ;

- int i;

- int err;

-

- err = unzlocal_getByte(fin,&i);

- x = (uLong)i;

-

- if (err==UNZ_OK)

- err = unzlocal_getByte(fin,&i);

- x += ((uLong)i)<<8;

-

- if (err==UNZ_OK)

- err = unzlocal_getByte(fin,&i);

- x += ((uLong)i)<<16;

-

- if (err==UNZ_OK)

- err = unzlocal_getByte(fin,&i);

- x += ((uLong)i)<<24;

-

- if (err==UNZ_OK)

- *pX = x;

- else

- *pX = 0;

- return err;

-}

-

-

-// My own strcmpi / strcasecmp

-int strcmpcasenosensitive_internal (const char* fileName1,const char *fileName2)

-{

- for (;;)

- {

- char c1=*(fileName1++);

- char c2=*(fileName2++);

- if ((c1>='a') && (c1<='z'))

- c1 -= (char)0x20;

- if ((c2>='a') && (c2<='z'))

- c2 -= (char)0x20;

- if (c1=='\0')

- return ((c2=='\0') ? 0 : -1);

- if (c2=='\0')

- return 1;

- if (c1<c2)

- return -1;

- if (c1>c2)

- return 1;

- }

-}

-

-

-

-

-//

-// Compare two filename (fileName1,fileName2).

-// If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp)

-// If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi or strcasecmp)

-//

-int unzStringFileNameCompare (const char*fileName1,const char*fileName2,int iCaseSensitivity)

-{ if (iCaseSensitivity==1) return strcmp(fileName1,fileName2);

- else return strcmpcasenosensitive_internal(fileName1,fileName2);

-}

-

-#define BUFREADCOMMENT (0x400)

-

-

-// Locate the Central directory of a zipfile (at the end, just before

-// the global comment)

-uLong unzlocal_SearchCentralDir(LUFILE *fin)

-{ if (lufseek(fin,0,SEEK_END) != 0) return 0;

- uLong uSizeFile = luftell(fin);

-

- uLong uMaxBack=0xffff; // maximum size of global comment

- if (uMaxBack>uSizeFile) uMaxBack = uSizeFile;

-

- unsigned char *buf = (unsigned char*)zmalloc(BUFREADCOMMENT+4);

- if (buf==NULL) return 0;

- uLong uPosFound=0;

-

- uLong uBackRead = 4;

- while (uBackRead<uMaxBack)

- { uLong uReadSize,uReadPos ;

- int i;

- if (uBackRead+BUFREADCOMMENT>uMaxBack) uBackRead = uMaxBack;

- else uBackRead+=BUFREADCOMMENT;

- uReadPos = uSizeFile-uBackRead ;

- uReadSize = ((BUFREADCOMMENT+4) < (uSizeFile-uReadPos)) ? (BUFREADCOMMENT+4) : (uSizeFile-uReadPos);

- if (lufseek(fin,uReadPos,SEEK_SET)!=0) break;

- if (lufread(buf,(uInt)uReadSize,1,fin)!=1) break;

- for (i=(int)uReadSize-3; (i--)>0;)

- { if (((*(buf+i))==0x50) && ((*(buf+i+1))==0x4b) && ((*(buf+i+2))==0x05) && ((*(buf+i+3))==0x06))

- { uPosFound = uReadPos+i; break;

- }

- }

- if (uPosFound!=0) break;

- }

- if (buf) zfree(buf);

- return uPosFound;

-}

-

-

-int unzGoToFirstFile (unzFile file);

-int unzCloseCurrentFile (unzFile file);

-

-// Open a Zip file.

-// If the zipfile cannot be opened (file don't exist or in not valid), return NULL.

-// Otherwise, the return value is a unzFile Handle, usable with other unzip functions

-unzFile unzOpenInternal(LUFILE *fin)

-{

- zopenerror = ZR_OK; //+++1.2

- if (fin==NULL) { zopenerror = ZR_ARGS; return NULL; } //+++1.2

- if (unz_copyright[0]!=' ') {lufclose(fin); zopenerror = ZR_CORRUPT; return NULL; } //+++1.2

-

- int err=UNZ_OK;

- unz_s us;

- uLong central_pos,uL;

- central_pos = unzlocal_SearchCentralDir(fin);

- if (central_pos==0) err=UNZ_ERRNO;

- if (lufseek(fin,central_pos,SEEK_SET)!=0) err=UNZ_ERRNO;

- // the signature, already checked

- if (unzlocal_getLong(fin,&uL)!=UNZ_OK) err=UNZ_ERRNO;

- // number of this disk

- uLong number_disk; // number of the current dist, used for spanning ZIP, unsupported, always 0

- if (unzlocal_getShort(fin,&number_disk)!=UNZ_OK) err=UNZ_ERRNO;

- // number of the disk with the start of the central directory

- uLong number_disk_with_CD; // number the the disk with central dir, used for spaning ZIP, unsupported, always 0

- if (unzlocal_getShort(fin,&number_disk_with_CD)!=UNZ_OK) err=UNZ_ERRNO;

- // total number of entries in the central dir on this disk

- if (unzlocal_getShort(fin,&us.gi.number_entry)!=UNZ_OK) err=UNZ_ERRNO;

- // total number of entries in the central dir

- uLong number_entry_CD; // total number of entries in the central dir (same than number_entry on nospan)

- if (unzlocal_getShort(fin,&number_entry_CD)!=UNZ_OK) err=UNZ_ERRNO;

- if ((number_entry_CD!=us.gi.number_entry) || (number_disk_with_CD!=0) || (number_disk!=0)) err=UNZ_BADZIPFILE;

- // size of the central directory

- if (unzlocal_getLong(fin,&us.size_central_dir)!=UNZ_OK) err=UNZ_ERRNO;

- // offset of start of central directory with respect to the starting disk number

- if (unzlocal_getLong(fin,&us.offset_central_dir)!=UNZ_OK) err=UNZ_ERRNO;

- // zipfile comment length

- if (unzlocal_getShort(fin,&us.gi.size_comment)!=UNZ_OK) err=UNZ_ERRNO;

- if ((central_pos+fin->initial_offset<us.offset_central_dir+us.size_central_dir) && (err==UNZ_OK)) err=UNZ_BADZIPFILE;

- //if (err!=UNZ_OK) {lufclose(fin);return NULL;}

- if (err!=UNZ_OK) {lufclose(fin); zopenerror = err; return NULL;} //+++1.2

-

- us.file=fin;

- us.byte_before_the_zipfile = central_pos+fin->initial_offset - (us.offset_central_dir+us.size_central_dir);

- us.central_pos = central_pos;

- us.pfile_in_zip_read = NULL;

- fin->initial_offset = 0; // since the zipfile itself is expected to handle this

-

- unz_s *s = (unz_s*)zmalloc(sizeof(unz_s));

- *s=us;

- unzGoToFirstFile((unzFile)s);

- return (unzFile)s;

-}

-

-

-

-// Close a ZipFile opened with unzipOpen.

-// If there is files inside the .Zip opened with unzipOpenCurrentFile (see later),

-// these files MUST be closed with unzipCloseCurrentFile before call unzipClose.

-// return UNZ_OK if there is no problem.

-int unzClose (unzFile file)

-{

- unz_s* s;

- if (file==NULL)

- return UNZ_PARAMERROR;

- s=(unz_s*)file;

-

- if (s->pfile_in_zip_read!=NULL)

- unzCloseCurrentFile(file);

-

- lufclose(s->file);

- if (s) zfree(s); // unused s=0;

- return UNZ_OK;

-}

-

-

-// Write info about the ZipFile in the *pglobal_info structure.

-// No preparation of the structure is needed

-// return UNZ_OK if there is no problem.

-int unzGetGlobalInfo (unzFile file,unz_global_info *pglobal_info)

-{

- unz_s* s;

- if (file==NULL)

- return UNZ_PARAMERROR;

- s=(unz_s*)file;

- *pglobal_info=s->gi;

- return UNZ_OK;

-}

-

-

-// Translate date/time from Dos format to tm_unz (readable more easilty)

-void unzlocal_DosDateToTmuDate (uLong ulDosDate, tm_unz* ptm)

-{

- uLong uDate;

- uDate = (uLong)(ulDosDate>>16);

- ptm->tm_mday = (uInt)(uDate&0x1f) ;

- ptm->tm_mon = (uInt)((((uDate)&0x1E0)/0x20)-1) ;

- ptm->tm_year = (uInt)(((uDate&0x0FE00)/0x0200)+1980) ;

-

- ptm->tm_hour = (uInt) ((ulDosDate &0xF800)/0x800);

- ptm->tm_min = (uInt) ((ulDosDate&0x7E0)/0x20) ;

- ptm->tm_sec = (uInt) (2*(ulDosDate&0x1f)) ;

-}

-

-// Get Info about the current file in the zipfile, with internal only info

-int unzlocal_GetCurrentFileInfoInternal (unzFile file,

- unz_file_info *pfile_info,

- unz_file_info_internal

- *pfile_info_internal,

- char *szFileName,

- uLong fileNameBufferSize,

- void *extraField,

- uLong extraFieldBufferSize,

- char *szComment,

- uLong commentBufferSize);

-

-int unzlocal_GetCurrentFileInfoInternal (unzFile file, unz_file_info *pfile_info,

- unz_file_info_internal *pfile_info_internal, char *szFileName,

- uLong fileNameBufferSize, void *extraField, uLong extraFieldBufferSize,

- char *szComment, uLong commentBufferSize)

-{

- unz_s* s;

- unz_file_info file_info;

- unz_file_info_internal file_info_internal;

- int err=UNZ_OK;

- uLong uMagic;

- long lSeek=0;

-

- if (file==NULL)

- return UNZ_PARAMERROR;

- s=(unz_s*)file;

- if (lufseek(s->file,s->pos_in_central_dir+s->byte_before_the_zipfile,SEEK_SET)!=0)

- err=UNZ_ERRNO;

-

-

- // we check the magic

- if (err==UNZ_OK)

- if (unzlocal_getLong(s->file,&uMagic) != UNZ_OK)

- err=UNZ_ERRNO;

- else if (uMagic!=0x02014b50)

- err=UNZ_BADZIPFILE;

-

- if (unzlocal_getShort(s->file,&file_info.version) != UNZ_OK)

- err=UNZ_ERRNO;

-

- if (unzlocal_getShort(s->file,&file_info.version_needed) != UNZ_OK)

- err=UNZ_ERRNO;

-

- if (unzlocal_getShort(s->file,&file_info.flag) != UNZ_OK)

- err=UNZ_ERRNO;

-

- if (unzlocal_getShort(s->file,&file_info.compression_method) != UNZ_OK)

- err=UNZ_ERRNO;

-

- if (unzlocal_getLong(s->file,&file_info.dosDate) != UNZ_OK)

- err=UNZ_ERRNO;

-

- unzlocal_DosDateToTmuDate(file_info.dosDate,&file_info.tmu_date);

-

- if (unzlocal_getLong(s->file,&file_info.crc) != UNZ_OK)

- err=UNZ_ERRNO;

-

- if (unzlocal_getLong(s->file,&file_info.compressed_size) != UNZ_OK)

- err=UNZ_ERRNO;

-

- if (unzlocal_getLong(s->file,&file_info.uncompressed_size) != UNZ_OK)

- err=UNZ_ERRNO;

-

- if (unzlocal_getShort(s->file,&file_info.size_filename) != UNZ_OK)

- err=UNZ_ERRNO;

-

- if (unzlocal_getShort(s->file,&file_info.size_file_extra) != UNZ_OK)

- err=UNZ_ERRNO;

-

- if (unzlocal_getShort(s->file,&file_info.size_file_comment) != UNZ_OK)

- err=UNZ_ERRNO;

-

- if (unzlocal_getShort(s->file,&file_info.disk_num_start) != UNZ_OK)

- err=UNZ_ERRNO;

-

- if (unzlocal_getShort(s->file,&file_info.internal_fa) != UNZ_OK)

- err=UNZ_ERRNO;

-

- if (unzlocal_getLong(s->file,&file_info.external_fa) != UNZ_OK)

- err=UNZ_ERRNO;

-

- if (unzlocal_getLong(s->file,&file_info_internal.offset_curfile) != UNZ_OK)

- err=UNZ_ERRNO;

-

- lSeek+=file_info.size_filename;

- if ((err==UNZ_OK) && (szFileName!=NULL))

- {

- uLong uSizeRead ;

- if (file_info.size_filename<fileNameBufferSize)

- {

- *(szFileName+file_info.size_filename)='\0';

- uSizeRead = file_info.size_filename;

- }

- else

- uSizeRead = fileNameBufferSize;

-

- if ((file_info.size_filename>0) && (fileNameBufferSize>0))

- if (lufread(szFileName,(uInt)uSizeRead,1,s->file)!=1)

- err=UNZ_ERRNO;

- lSeek -= uSizeRead;

- }

-

-

- if ((err==UNZ_OK) && (extraField!=NULL))

- {

- uLong uSizeRead ;

- if (file_info.size_file_extra<extraFieldBufferSize)

- uSizeRead = file_info.size_file_extra;

- else

- uSizeRead = extraFieldBufferSize;

-

- if (lSeek!=0)

- if (lufseek(s->file,lSeek,SEEK_CUR)==0)

- lSeek=0;

- else

- err=UNZ_ERRNO;

- if ((file_info.size_file_extra>0) && (extraFieldBufferSize>0))

- if (lufread(extraField,(uInt)uSizeRead,1,s->file)!=1)

- err=UNZ_ERRNO;

- lSeek += file_info.size_file_extra - uSizeRead;

- }

- else

- lSeek+=file_info.size_file_extra;

-

-

- if ((err==UNZ_OK) && (szComment!=NULL))

- {

- uLong uSizeRead ;

- if (file_info.size_file_comment<commentBufferSize)

- {

- *(szComment+file_info.size_file_comment)='\0';

- uSizeRead = file_info.size_file_comment;

- }

- else

- uSizeRead = commentBufferSize;

-

- if (lSeek!=0)

- if (lufseek(s->file,lSeek,SEEK_CUR)==0)

- {} // unused lSeek=0;

- else

- err=UNZ_ERRNO;

- if ((file_info.size_file_comment>0) && (commentBufferSize>0))

- if (lufread(szComment,(uInt)uSizeRead,1,s->file)!=1)

- err=UNZ_ERRNO;

- //unused lSeek+=file_info.size_file_comment - uSizeRead;

- }

- else {} //unused lSeek+=file_info.size_file_comment;

-

- if ((err==UNZ_OK) && (pfile_info!=NULL))

- *pfile_info=file_info;

-

- if ((err==UNZ_OK) && (pfile_info_internal!=NULL))

- *pfile_info_internal=file_info_internal;

-

- return err;

-}

-

-

-

-// Write info about the ZipFile in the *pglobal_info structure.

-// No preparation of the structure is needed

-// return UNZ_OK if there is no problem.

-int unzGetCurrentFileInfo (unzFile file, unz_file_info *pfile_info,

- char *szFileName, uLong fileNameBufferSize, void *extraField, uLong extraFieldBufferSize,

- char *szComment, uLong commentBufferSize)

-{ return unzlocal_GetCurrentFileInfoInternal(file,pfile_info,NULL,szFileName,fileNameBufferSize,

- extraField,extraFieldBufferSize, szComment,commentBufferSize);

-}

-

-

-// Set the current file of the zipfile to the first file.

-// return UNZ_OK if there is no problem

-int unzGoToFirstFile (unzFile file)

-{

- int err;

- unz_s* s;

- if (file==NULL) return UNZ_PARAMERROR;

- s=(unz_s*)file;

- s->pos_in_central_dir=s->offset_central_dir;

- s->num_file=0;

- err=unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info,

- &s->cur_file_info_internal,

- NULL,0,NULL,0,NULL,0);

- s->current_file_ok = (err == UNZ_OK);

- return err;

-}

-

-

-// Set the current file of the zipfile to the next file.

-// return UNZ_OK if there is no problem

-// return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest.

-int unzGoToNextFile (unzFile file)

-{

- unz_s* s;

- int err;

-

- if (file==NULL)

- return UNZ_PARAMERROR;

- s=(unz_s*)file;

- if (!s->current_file_ok)

- return UNZ_END_OF_LIST_OF_FILE;

- if (s->num_file+1==s->gi.number_entry)

- return UNZ_END_OF_LIST_OF_FILE;

-

- s->pos_in_central_dir += SIZECENTRALDIRITEM + s->cur_file_info.size_filename +

- s->cur_file_info.size_file_extra + s->cur_file_info.size_file_comment ;

- s->num_file++;

- err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info,

- &s->cur_file_info_internal,

- NULL,0,NULL,0,NULL,0);

- s->current_file_ok = (err == UNZ_OK);

- return err;

-}

-

-

-// Try locate the file szFileName in the zipfile.

-// For the iCaseSensitivity signification, see unzStringFileNameCompare

-// return value :

-// UNZ_OK if the file is found. It becomes the current file.

-// UNZ_END_OF_LIST_OF_FILE if the file is not found

-int unzLocateFile (unzFile file, const TCHAR *szFileName, int iCaseSensitivity)

-{

- unz_s* s;

- int err;

-

- uLong num_fileSaved;

- uLong pos_in_central_dirSaved;

-

- if (file==NULL)

- return UNZ_PARAMERROR;

-

- if (_tcslen(szFileName)>=UNZ_MAXFILENAMEINZIP)

- return UNZ_PARAMERROR;

-

- char szFileNameA[MAX_PATH];

-

-#ifdef _UNICODE

- GetAnsiFileName(szFileName, szFileNameA, MAX_PATH-1);

-#else

- strcpy(szFileNameA, szFileName);

-#endif

-

- s=(unz_s*)file;

- if (!s->current_file_ok)

- return UNZ_END_OF_LIST_OF_FILE;

-

- num_fileSaved = s->num_file;

- pos_in_central_dirSaved = s->pos_in_central_dir;

-

- err = unzGoToFirstFile(file);

-

- while (err == UNZ_OK)

- {

- char szCurrentFileName[UNZ_MAXFILENAMEINZIP+1];

- unzGetCurrentFileInfo(file,NULL,

- szCurrentFileName,sizeof(szCurrentFileName)-1,

- NULL,0,NULL,0);

- if (unzStringFileNameCompare(szCurrentFileName,szFileNameA,iCaseSensitivity)==0)

- return UNZ_OK;

- err = unzGoToNextFile(file);

- }

-

- s->num_file = num_fileSaved ;

- s->pos_in_central_dir = pos_in_central_dirSaved ;

- return err;

-}

-

-

-// Read the local header of the current zipfile

-// Check the coherency of the local header and info in the end of central

-// directory about this file

-// store in *piSizeVar the size of extra info in local header

-// (filename and size of extra field data)

-int unzlocal_CheckCurrentFileCoherencyHeader (unz_s *s,uInt *piSizeVar,

- uLong *poffset_local_extrafield, uInt *psize_local_extrafield)

-{

- uLong uMagic,uData,uFlags;

- uLong size_filename;

- uLong size_extra_field;

- int err=UNZ_OK;

-

- *piSizeVar = 0;

- *poffset_local_extrafield = 0;

- *psize_local_extrafield = 0;

-

- if (lufseek(s->file,s->cur_file_info_internal.offset_curfile + s->byte_before_the_zipfile,SEEK_SET)!=0)

- return UNZ_ERRNO;

-

-

- if (err==UNZ_OK)

- if (unzlocal_getLong(s->file,&uMagic) != UNZ_OK)

- err=UNZ_ERRNO;

- else if (uMagic!=0x04034b50)

- err=UNZ_BADZIPFILE;

-

- if (unzlocal_getShort(s->file,&uData) != UNZ_OK)

- err=UNZ_ERRNO;

-// else if ((err==UNZ_OK) && (uData!=s->cur_file_info.wVersion))

-// err=UNZ_BADZIPFILE;

- if (unzlocal_getShort(s->file,&uFlags) != UNZ_OK)

- err=UNZ_ERRNO;

-

- if (unzlocal_getShort(s->file,&uData) != UNZ_OK)

- err=UNZ_ERRNO;

- else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compression_method))

- err=UNZ_BADZIPFILE;

-

- if ((err==UNZ_OK) && (s->cur_file_info.compression_method!=0) &&

- (s->cur_file_info.compression_method!=Z_DEFLATED))

- err=UNZ_BADZIPFILE;

-

- if (unzlocal_getLong(s->file,&uData) != UNZ_OK) // date/time

- err=UNZ_ERRNO;

-

- if (unzlocal_getLong(s->file,&uData) != UNZ_OK) // crc

- err=UNZ_ERRNO;

- else if ((err==UNZ_OK) && (uData!=s->cur_file_info.crc) &&

- ((uFlags & 8)==0))

- err=UNZ_BADZIPFILE;

-

- if (unzlocal_getLong(s->file,&uData) != UNZ_OK) // size compr

- err=UNZ_ERRNO;

- else if ((err==UNZ_OK) && (uData!=s->cur_file_info.compressed_size) &&

- ((uFlags & 8)==0))

- err=UNZ_BADZIPFILE;

-

- if (unzlocal_getLong(s->file,&uData) != UNZ_OK) // size uncompr

- err=UNZ_ERRNO;

- else if ((err==UNZ_OK) && (uData!=s->cur_file_info.uncompressed_size) &&

- ((uFlags & 8)==0))

- err=UNZ_BADZIPFILE;

-

-

- if (unzlocal_getShort(s->file,&size_filename) != UNZ_OK)

- err=UNZ_ERRNO;

- else if ((err==UNZ_OK) && (size_filename!=s->cur_file_info.size_filename))

- err=UNZ_BADZIPFILE;

-

- *piSizeVar += (uInt)size_filename;

-

- if (unzlocal_getShort(s->file,&size_extra_field) != UNZ_OK)

- err=UNZ_ERRNO;

- *poffset_local_extrafield= s->cur_file_info_internal.offset_curfile +

- SIZEZIPLOCALHEADER + size_filename;

- *psize_local_extrafield = (uInt)size_extra_field;

-

- *piSizeVar += (uInt)size_extra_field;

-

- return err;

-}

-

-

-

-

-

-// Open for reading data the current file in the zipfile.

-// If there is no error and the file is opened, the return value is UNZ_OK.

-int unzOpenCurrentFile (unzFile file)

-{

- int err;

- int Store;

- uInt iSizeVar;

- unz_s* s;

- file_in_zip_read_info_s* pfile_in_zip_read_info;

- uLong offset_local_extrafield; // offset of the local extra field

- uInt size_local_extrafield; // size of the local extra field

-

- if (file==NULL)

- return UNZ_PARAMERROR;

- s=(unz_s*)file;

- if (!s->current_file_ok)

- return UNZ_PARAMERROR;

-

- if (s->pfile_in_zip_read != NULL)

- unzCloseCurrentFile(file);

-

- if (unzlocal_CheckCurrentFileCoherencyHeader(s,&iSizeVar,

- &offset_local_extrafield,&size_local_extrafield)!=UNZ_OK)

- return UNZ_BADZIPFILE;

-

- pfile_in_zip_read_info = (file_in_zip_read_info_s*)zmalloc(sizeof(file_in_zip_read_info_s));

- if (pfile_in_zip_read_info==NULL)

- return UNZ_INTERNALERROR;

-

- pfile_in_zip_read_info->read_buffer=(char*)zmalloc(UNZ_BUFSIZE);

- pfile_in_zip_read_info->offset_local_extrafield = offset_local_extrafield;

- pfile_in_zip_read_info->size_local_extrafield = size_local_extrafield;

- pfile_in_zip_read_info->pos_local_extrafield=0;

-

- if (pfile_in_zip_read_info->read_buffer==NULL)

- {

- if (pfile_in_zip_read_info!=0) zfree(pfile_in_zip_read_info); //unused pfile_in_zip_read_info=0;

- return UNZ_INTERNALERROR;

- }

-

- pfile_in_zip_read_info->stream_initialised=0;

-

- if ((s->cur_file_info.compression_method!=0) && (s->cur_file_info.compression_method!=Z_DEFLATED))

- { // unused err=UNZ_BADZIPFILE;

- }

- Store = s->cur_file_info.compression_method==0;

-

- pfile_in_zip_read_info->crc32_wait=s->cur_file_info.crc;

- pfile_in_zip_read_info->crc32=0;

- pfile_in_zip_read_info->compression_method =

- s->cur_file_info.compression_method;

- pfile_in_zip_read_info->file=s->file;

- pfile_in_zip_read_info->byte_before_the_zipfile=s->byte_before_the_zipfile;

-

- pfile_in_zip_read_info->stream.total_out = 0;

-

- if (!Store)

- {

- pfile_in_zip_read_info->stream.zalloc = (alloc_func)0;

- pfile_in_zip_read_info->stream.zfree = (free_func)0;

- pfile_in_zip_read_info->stream.opaque = (voidpf)0;

-

- err=inflateInit2(&pfile_in_zip_read_info->stream);

- if (err == Z_OK)

- pfile_in_zip_read_info->stream_initialised=1;

- // windowBits is passed < 0 to tell that there is no zlib header.

- // Note that in this case inflate *requires* an extra "dummy" byte

- // after the compressed stream in order to complete decompression and

- // return Z_STREAM_END.

- // In unzip, i don't wait absolutely Z_STREAM_END because I known the

- // size of both compressed and uncompressed data

- }

- pfile_in_zip_read_info->rest_read_compressed =

- s->cur_file_info.compressed_size ;

- pfile_in_zip_read_info->rest_read_uncompressed =

- s->cur_file_info.uncompressed_size ;

-

-

- pfile_in_zip_read_info->pos_in_zipfile =

- s->cur_file_info_internal.offset_curfile + SIZEZIPLOCALHEADER +

- iSizeVar;

-

- pfile_in_zip_read_info->stream.avail_in = (uInt)0;

-

-

- s->pfile_in_zip_read = pfile_in_zip_read_info;

- return UNZ_OK;

-}

-

-

-// Read bytes from the current file.

-// buf contain buffer where data must be copied

-// len the size of buf.

-// return the number of byte copied if somes bytes are copied

-// return 0 if the end of file was reached

-// return <0 with error code if there is an error

-// (UNZ_ERRNO for IO error, or zLib error for uncompress error)

-int unzReadCurrentFile (unzFile file, voidp buf, unsigned len)

-{ int err=UNZ_OK;

- uInt iRead = 0;

-

- unz_s *s = (unz_s*)file;

- if (s==NULL) return UNZ_PARAMERROR;

-

- file_in_zip_read_info_s* pfile_in_zip_read_info = s->pfile_in_zip_read;

- if (pfile_in_zip_read_info==NULL) return UNZ_PARAMERROR;

- if ((pfile_in_zip_read_info->read_buffer == NULL)) return UNZ_END_OF_LIST_OF_FILE;

- if (len==0) return 0;

-

- pfile_in_zip_read_info->stream.next_out = (Byte*)buf;

- pfile_in_zip_read_info->stream.avail_out = (uInt)len;

-

- if (len>pfile_in_zip_read_info->rest_read_uncompressed)

- { pfile_in_zip_read_info->stream.avail_out = (uInt)pfile_in_zip_read_info->rest_read_uncompressed;

- }

-

- while (pfile_in_zip_read_info->stream.avail_out>0)

- { if ((pfile_in_zip_read_info->stream.avail_in==0) && (pfile_in_zip_read_info->rest_read_compressed>0))

- { uInt uReadThis = UNZ_BUFSIZE;

- if (pfile_in_zip_read_info->rest_read_compressed<uReadThis) uReadThis = (uInt)pfile_in_zip_read_info->rest_read_compressed;

- if (uReadThis == 0) return UNZ_EOF;

- if (lufseek(pfile_in_zip_read_info->file, pfile_in_zip_read_info->pos_in_zipfile + pfile_in_zip_read_info->byte_before_the_zipfile,SEEK_SET)!=0) return UNZ_ERRNO;

- if (lufread(pfile_in_zip_read_info->read_buffer,uReadThis,1,pfile_in_zip_read_info->file)!=1) return UNZ_ERRNO;

- pfile_in_zip_read_info->pos_in_zipfile += uReadThis;

- pfile_in_zip_read_info->rest_read_compressed-=uReadThis;

- pfile_in_zip_read_info->stream.next_in = (Byte*)pfile_in_zip_read_info->read_buffer;

- pfile_in_zip_read_info->stream.avail_in = (uInt)uReadThis;

- }

-

- if (pfile_in_zip_read_info->compression_method==0)

- { uInt uDoCopy,i ;

- if (pfile_in_zip_read_info->stream.avail_out < pfile_in_zip_read_info->stream.avail_in)

- { uDoCopy = pfile_in_zip_read_info->stream.avail_out ;

- }

- else

- { uDoCopy = pfile_in_zip_read_info->stream.avail_in ;

- }

- for (i=0;i<uDoCopy;i++)

- { *(pfile_in_zip_read_info->stream.next_out+i) = *(pfile_in_zip_read_info->stream.next_in+i);

- }

- pfile_in_zip_read_info->crc32 = ucrc32(pfile_in_zip_read_info->crc32,pfile_in_zip_read_info->stream.next_out,uDoCopy);

- pfile_in_zip_read_info->rest_read_uncompressed-=uDoCopy;

- pfile_in_zip_read_info->stream.avail_in -= uDoCopy;

- pfile_in_zip_read_info->stream.avail_out -= uDoCopy;

- pfile_in_zip_read_info->stream.next_out += uDoCopy;

- pfile_in_zip_read_info->stream.next_in += uDoCopy;

- pfile_in_zip_read_info->stream.total_out += uDoCopy;

- iRead += uDoCopy;

- }

- else

- { uLong uTotalOutBefore,uTotalOutAfter;

- const Byte *bufBefore;

- uLong uOutThis;

- int flush=Z_SYNC_FLUSH;

- uTotalOutBefore = pfile_in_zip_read_info->stream.total_out;

- bufBefore = pfile_in_zip_read_info->stream.next_out;

- err=inflate(&pfile_in_zip_read_info->stream,flush);

- uTotalOutAfter = pfile_in_zip_read_info->stream.total_out;

- uOutThis = uTotalOutAfter-uTotalOutBefore;

- pfile_in_zip_read_info->crc32 = ucrc32(pfile_in_zip_read_info->crc32,bufBefore,(uInt)(uOutThis));

- pfile_in_zip_read_info->rest_read_uncompressed -= uOutThis;

- iRead += (uInt)(uTotalOutAfter - uTotalOutBefore);

- if (err==Z_STREAM_END)

- {

- if( pfile_in_zip_read_info->rest_read_uncompressed > 0 )

- {

- return iRead; // More to go

- }

- return Z_OK; // No point returning UNZ_EOF as it is also zero

- }

- //if (err==Z_STREAM_END) return (iRead==0) ? UNZ_EOF : iRead; //+++1.3

- //if (err==Z_STREAM_END) return (iRead==len) ? UNZ_EOF : iRead; //+++1.2

-

- if (err != Z_OK) break;

- }

- }

-

- // if (err==Z_OK) return iRead;

- if( err == Z_OK )

- {

- if( pfile_in_zip_read_info->rest_read_uncompressed > 0 )

- {

- return iRead; // More to go

- }

- return Z_OK; // Done

- }

-

- return iRead;

-}

-

-

-// Give the current position in uncompressed data

-z_off_t unztell (unzFile file)

-{

- unz_s* s;

- file_in_zip_read_info_s* pfile_in_zip_read_info;

- if (file==NULL)

- return UNZ_PARAMERROR;

- s=(unz_s*)file;

- pfile_in_zip_read_info=s->pfile_in_zip_read;

-

- if (pfile_in_zip_read_info==NULL)

- return UNZ_PARAMERROR;

-

- return (z_off_t)pfile_in_zip_read_info->stream.total_out;

-}

-

-

-// return 1 if the end of file was reached, 0 elsewhere

-int unzeof (unzFile file)

-{

- unz_s* s;

- file_in_zip_read_info_s* pfile_in_zip_read_info;

- if (file==NULL)

- return UNZ_PARAMERROR;

- s=(unz_s*)file;

- pfile_in_zip_read_info=s->pfile_in_zip_read;

-

- if (pfile_in_zip_read_info==NULL)

- return UNZ_PARAMERROR;

-

- if (pfile_in_zip_read_info->rest_read_uncompressed == 0)

- return 1;

- else

- return 0;

-}

-

-

-

-// Read extra field from the current file (opened by unzOpenCurrentFile)

-// This is the local-header version of the extra field (sometimes, there is

-// more info in the local-header version than in the central-header)

-// if buf==NULL, it return the size of the local extra field that can be read

-// if buf!=NULL, len is the size of the buffer, the extra header is copied in buf.

-// the return value is the number of bytes copied in buf, or (if <0) the error code

-int unzGetLocalExtrafield (unzFile file,voidp buf,unsigned len)

-{

- unz_s* s;

- file_in_zip_read_info_s* pfile_in_zip_read_info;

- uInt read_now;

- uLong size_to_read;

-

- if (file==NULL)

- return UNZ_PARAMERROR;

- s=(unz_s*)file;

- pfile_in_zip_read_info=s->pfile_in_zip_read;

-

- if (pfile_in_zip_read_info==NULL)

- return UNZ_PARAMERROR;

-

- size_to_read = (pfile_in_zip_read_info->size_local_extrafield -

- pfile_in_zip_read_info->pos_local_extrafield);

-

- if (buf==NULL)

- return (int)size_to_read;

-

- if (len>size_to_read)

- read_now = (uInt)size_to_read;

- else

- read_now = (uInt)len ;

-

- if (read_now==0)

- return 0;

-

- if (lufseek(pfile_in_zip_read_info->file, pfile_in_zip_read_info->offset_local_extrafield + pfile_in_zip_read_info->pos_local_extrafield,SEEK_SET)!=0)

- return UNZ_ERRNO;

-

- if (lufread(buf,(uInt)size_to_read,1,pfile_in_zip_read_info->file)!=1)

- return UNZ_ERRNO;

-

- return (int)read_now;

-}

-

-// Close the file in zip opened with unzipOpenCurrentFile

-// Return UNZ_CRCERROR if all the file was read but the CRC is not good

-int unzCloseCurrentFile (unzFile file)

-{

- int err=UNZ_OK;

-

- unz_s* s;

- file_in_zip_read_info_s* pfile_in_zip_read_info;

- if (file==NULL)

- return UNZ_PARAMERROR;

- s=(unz_s*)file;

- pfile_in_zip_read_info=s->pfile_in_zip_read;

-

- if (pfile_in_zip_read_info==NULL)

- return UNZ_PARAMERROR;

-

-

- if (pfile_in_zip_read_info->rest_read_uncompressed == 0)

- {

- if (pfile_in_zip_read_info->crc32 != pfile_in_zip_read_info->crc32_wait)

- err=UNZ_CRCERROR;

- }

-

-

- if (pfile_in_zip_read_info->read_buffer!=0)

- { void *buf = pfile_in_zip_read_info->read_buffer;

- zfree(buf);

- pfile_in_zip_read_info->read_buffer=0;

- }

- pfile_in_zip_read_info->read_buffer = NULL;

- if (pfile_in_zip_read_info->stream_initialised)

- inflateEnd(&pfile_in_zip_read_info->stream);

-

- pfile_in_zip_read_info->stream_initialised = 0;

- if (pfile_in_zip_read_info!=0) zfree(pfile_in_zip_read_info); // unused pfile_in_zip_read_info=0;

-

- s->pfile_in_zip_read=NULL;

-

- return err;

-}

-

-

-// Get the global comment string of the ZipFile, in the szComment buffer.

-// uSizeBuf is the size of the szComment buffer.

-// return the number of byte copied or an error code <0

-int unzGetGlobalComment (unzFile file, char *szComment, uLong uSizeBuf)

-{ //int err=UNZ_OK;

- unz_s* s;

- uLong uReadThis ;

- if (file==NULL) return UNZ_PARAMERROR;

- s=(unz_s*)file;

- uReadThis = uSizeBuf;

- if (uReadThis>s->gi.size_comment) uReadThis = s->gi.size_comment;

- if (lufseek(s->file,s->central_pos+22,SEEK_SET)!=0) return UNZ_ERRNO;

- if (uReadThis>0)

- { *szComment='\0';

- if (lufread(szComment,(uInt)uReadThis,1,s->file)!=1) return UNZ_ERRNO;

- }

- if ((szComment != NULL) && (uSizeBuf > s->gi.size_comment)) *(szComment+s->gi.size_comment)='\0';

- return (int)uReadThis;

-}

-

-

-

-

-

-int unzOpenCurrentFile (unzFile file);

-int unzReadCurrentFile (unzFile file, void *buf, unsigned len);

-int unzCloseCurrentFile (unzFile file);

-

-

-FILETIME timet2filetime(__time32_t timer)

-{

- struct tm *tm = _gmtime32(&timer);

- SYSTEMTIME st;

-

- if (tm == NULL)

- {

- _time32(&timer);

- tm = _gmtime32(&timer);

- }

-

- st.wYear = (WORD)(tm->tm_year+1900);

- st.wMonth = (WORD)(tm->tm_mon+1);

- st.wDay = (WORD)(tm->tm_mday);

- st.wHour = (WORD)(tm->tm_hour);

- st.wMinute = (WORD)(tm->tm_min);

- st.wSecond = (WORD)(tm->tm_sec);

- st.wMilliseconds=0;

- FILETIME ft;

- SystemTimeToFileTime(&st,&ft);

- return ft;

-}

-

-///////////////////////////////////////////////////////////////////////////////

-///////////////////////////////////////////////////////////////////////////////

-///////////////////////////////////////////////////////////////////////////////

-class TUnzip

-{ public:

- TUnzip() : uf(0), currentfile(-1), czei(-1) {}

-

- unzFile uf; int currentfile; ZIPENTRY cze; int czei;

- TCHAR rootdir[MAX_PATH];

-

- ZRESULT Open(void *z,unsigned int len,DWORD flags);

- ZRESULT Get(int index,ZIPENTRY *ze);

- ZRESULT Find(const TCHAR *name,bool ic,int *index,ZIPENTRY *ze);

- ZRESULT Unzip(int index,void *dst,unsigned int len,DWORD flags);

- ZRESULT Close();

-};

-

-

-ZRESULT TUnzip::Open(void *z,unsigned int len,DWORD flags)

-{

- if (uf!=0 || currentfile!=-1)

- return ZR_NOTINITED;

- GetCurrentDirectory(MAX_PATH,rootdir);

- _tcscat(rootdir,_T("\\"));

- if (flags==ZIP_HANDLE)

- {

- DWORD type = GetFileType(z);

- if (type!=FILE_TYPE_DISK)

- return ZR_SEEK;

- }

- ZRESULT e;

- LUFILE *f = lufopen(z,len,flags,&e);

- if (f==NULL)

- return e;

- uf = unzOpenInternal(f);

- //return ZR_OK;

- return zopenerror; //+++1.2

-}

-

-ZRESULT TUnzip::Get(int index,ZIPENTRY *ze)

-{ if (index<-1 || index>=(int)uf->gi.number_entry)

- return ZR_ARGS;

- if (currentfile!=-1)

- unzCloseCurrentFile(uf);

- currentfile=-1;

- if (index==czei && index!=-1) {memcpy(ze,&cze,sizeof(ZIPENTRY)); return ZR_OK;}

- if (index==-1)

- { ze->index = uf->gi.number_entry;

- ze->name[0]=0;

- ze->attr=0;

- ze->atime.dwLowDateTime=0; ze->atime.dwHighDateTime=0;

- ze->ctime.dwLowDateTime=0; ze->ctime.dwHighDateTime=0;

- ze->mtime.dwLowDateTime=0; ze->mtime.dwHighDateTime=0;

- ze->comp_size=0;

- ze->unc_size=0;

- return ZR_OK;

- }

- if (index<(int)uf->num_file) unzGoToFirstFile(uf);

- while ((int)uf->num_file<index) unzGoToNextFile(uf);

- unz_file_info ufi;

- char fn[MAX_PATH];

- unzGetCurrentFileInfo(uf,&ufi,fn,MAX_PATH,NULL,0,NULL,0);

-

- // now get the extra header. We do this ourselves, instead of

- // calling unzOpenCurrentFile &c., to avoid allocating more than necessary.

- unsigned int extralen,iSizeVar; unsigned long offset;

- int res = unzlocal_CheckCurrentFileCoherencyHeader(uf,&iSizeVar,&offset,&extralen);

- if (res!=UNZ_OK) return ZR_CORRUPT;

- if (lufseek(uf->file,offset,SEEK_SET)!=0) return ZR_READ;

- char *extra = new char[extralen];

- if (lufread(extra,1,(uInt)extralen,uf->file)!=extralen) {delete[] extra; return ZR_READ;}

- //

- ze->index=uf->num_file;

- strcpy(ze->name,fn);

- // zip has an 'attribute' 32bit value. Its lower half is windows stuff

- // its upper half is standard unix attr.

- unsigned long a = ufi.external_fa;

- bool uisdir = (a&0x40000000)!=0;

- //bool uwriteable= (a&0x08000000)!=0;

- bool uwriteable= (a&0x00800000)!=0; // ***hd***

- //bool ureadable= (a&0x01000000)!=0;

- //bool uexecutable=(a&0x00400000)!=0;

- bool wreadonly= (a&0x00000001)!=0;

- bool whidden= (a&0x00000002)!=0;

- bool wsystem= (a&0x00000004)!=0;

- bool wisdir= (a&0x00000010)!=0;

- bool warchive= (a&0x00000020)!=0;

- ze->attr=FILE_ATTRIBUTE_NORMAL;

- if (uisdir || wisdir) ze->attr |= FILE_ATTRIBUTE_DIRECTORY;

- if (warchive) ze->attr|=FILE_ATTRIBUTE_ARCHIVE;

- if (whidden) ze->attr|=FILE_ATTRIBUTE_HIDDEN;

- if (!uwriteable||wreadonly) ze->attr|=FILE_ATTRIBUTE_READONLY;

- if (wsystem) ze->attr|=FILE_ATTRIBUTE_SYSTEM;

- ze->comp_size = ufi.compressed_size;

- ze->unc_size = ufi.uncompressed_size;

- //

- WORD dostime = (WORD)(ufi.dosDate&0xFFFF);

- WORD dosdate = (WORD)((ufi.dosDate>>16)&0xFFFF);

- FILETIME lt, ft;

- DosDateTimeToFileTime(dosdate,dostime,&lt);

- LocalFileTimeToFileTime(&lt,&ft);

- ze->atime=ft; ze->ctime=ft; ze->mtime=ft;

- // the zip will always have at least that dostime. But if it also has

- // an extra header, then we'll instead get the info from that.

- unsigned int epos=0;

- while (epos+4<extralen)

- { char etype[3]; etype[0]=extra[epos+0]; etype[1]=extra[epos+1]; etype[2]=0;

- int size = extra[epos+2];

- if (strcmp(etype,"UT")!=0) {epos += 4+size; continue;}

- int flags = extra[epos+4];

- bool hasmtime = (flags&1)!=0;

- bool hasatime = (flags&2)!=0;

- bool hasctime = (flags&4)!=0;

- epos+=5;

- if (hasmtime)

- { __time32_t mtime = *(__time32_t*)(extra+epos); epos+=4;

- ze->mtime = timet2filetime(mtime);

- }

- if (hasatime)

- { __time32_t atime = *(__time32_t*)(extra+epos); epos+=4;

- ze->atime = timet2filetime(atime);

- }

- if (hasctime)

- { __time32_t ctime = *(__time32_t*)(extra+epos);

- ze->ctime = timet2filetime(ctime);

- }

- break;

- }

- //

- if (extra!=0) delete[] extra;

- memcpy(&cze,ze,sizeof(ZIPENTRY)); czei=index;

- return ZR_OK;

-}

-

-ZRESULT TUnzip::Find(const TCHAR *name, bool ic, int *index, ZIPENTRY *ze)

-{

- int res = unzLocateFile(uf,name,ic?CASE_INSENSITIVE:CASE_SENSITIVE);

- if (res!=UNZ_OK)

- {

- if (index!=0)

- *index=-1;

- if (ze!=NULL)

- {

- ZeroMemory(ze,sizeof(ZIPENTRY)); ze->index=-1;

- }

- return ZR_NOTFOUND;

- }

- if (currentfile!=-1)

- unzCloseCurrentFile(uf); currentfile=-1;

- int i = (int)uf->num_file;

- if (index!=NULL)

- *index=i;

- if (ze!=NULL)

- {

- ZRESULT zres = Get(i,ze);

- if (zres!=ZR_OK)

- return zres;

- }

- return ZR_OK;

-}

-

-void EnsureDirectory(const TCHAR *rootdir, const TCHAR *dir)

-{

- if (dir==NULL || dir[0] == _T('\0'))

- return;

- const TCHAR *lastslash = dir, *c = lastslash;

- while (*c != _T('\0'))

- {

- if (*c==_T('/') || *c==_T('\\'))

- lastslash=c;

- c++;

- }

- const TCHAR *name=lastslash;

- if (lastslash!=dir)

- {

- TCHAR tmp[MAX_PATH];

- _tcsncpy(tmp, dir, lastslash-dir);

- tmp[lastslash-dir] = _T('\0');

- EnsureDirectory(rootdir,tmp);

- name++;

- }

- TCHAR cd[MAX_PATH];

- _tcscpy(cd,rootdir);

- //_tcscat(cd,name);

- _tcscat(cd,dir); //+++1.2

- CreateDirectory(cd,NULL);

-}

-

-ZRESULT TUnzip::Unzip(int index,void *dst,unsigned int len,DWORD flags)

-{

- if (flags!=ZIP_MEMORY && flags!=ZIP_FILENAME && flags!=ZIP_HANDLE)

- return ZR_ARGS;

- if (flags==ZIP_MEMORY)

- {

- if (index!=currentfile)

- {

- if (currentfile!=-1)

- unzCloseCurrentFile(uf);

- currentfile=-1;

- if (index>=(int)uf->gi.number_entry)

- return ZR_ARGS;

- if (index<(int)uf->num_file)

- unzGoToFirstFile(uf);

- while ((int)uf->num_file<index)

- unzGoToNextFile(uf);

- unzOpenCurrentFile(uf);

- currentfile=index;

- }

- int res = unzReadCurrentFile(uf,dst,len);

- if (res>0)

- return ZR_MORE;

- unzCloseCurrentFile(uf);

- currentfile=-1;

- if (res==0)

- return ZR_OK;

- else

- return ZR_FLATE;

- }

-

- // otherwise we're writing to a handle or a file

- if (currentfile!=-1)

- unzCloseCurrentFile(uf);

- currentfile=-1;

- if (index >= (int)uf->gi.number_entry)

- return ZR_ARGS;

- if (index < (int)uf->num_file)

- unzGoToFirstFile(uf);

- while ((int)uf->num_file<index)

- unzGoToNextFile(uf);

- ZIPENTRY ze;

- Get(index,&ze);

-

- // zipentry=directory is handled specially

- if ((ze.attr & FILE_ATTRIBUTE_DIRECTORY) != 0)

- {

- if (flags==ZIP_HANDLE)

- return ZR_OK; // don't do anything

-#ifdef _UNICODE

- TCHAR uname[MAX_PATH];

- GetUnicodeFileName(ze.name, uname, MAX_PATH-1);

- EnsureDirectory(rootdir, uname);

-#else

- EnsureDirectory(rootdir, ze.name);

-#endif

- return ZR_OK;

- }

-

- // otherwise, we write the zipentry to a file/handle

- HANDLE h;

- if (flags==ZIP_HANDLE)

- h=dst;

- else

- {

- const TCHAR *name = (const TCHAR *)dst;

- const TCHAR *c = name;

- while (*c)

- {

- if (*c == _T('/') || *c == _T('\\'))

- name = c + 1;

- c++;

- }

- // if it's a relative filename, ensure directories. We do this as a service

- // to the caller so they can just unzip straight unto ze.name.

- if (name != (const TCHAR *)dst)

- {

- TCHAR dir[MAX_PATH];

- _tcscpy(dir,(const TCHAR*)dst);

- dir[name-(const TCHAR*)dst-1] = _T('\0');

- bool isabsolute = (dir[0]==_T('/') || dir[0]==_T('\\') || dir[1]==_T(':'));

- isabsolute |= (_tcsstr(dir,_T("../"))!=0) | (_tcsstr(dir,_T("..\\"))!=0);

- if (!isabsolute)

- EnsureDirectory(rootdir,dir);

- }

- h = ::CreateFile((const TCHAR*)dst, GENERIC_WRITE, 0, NULL, CREATE_ALWAYS,

- ze.attr, NULL);

- }

-

- if (h == INVALID_HANDLE_VALUE)

- return ZR_NOFILE;

-

- unzOpenCurrentFile(uf);

- BYTE buf[16384];

- bool haderr=false;

-

- for (;;)

- {

- int res = unzReadCurrentFile(uf,buf,16384);

- if (res<0)

- {

- haderr=true;

- break;

- }

- if (res==0)

- break;

- DWORD writ;

- BOOL bres = WriteFile(h,buf,res,&writ,NULL);

- if (!bres)

- {

- haderr=true;

- break;

- }

- }

- bool settime=false;

- DWORD type = GetFileType(h);

- if (type==FILE_TYPE_DISK && !haderr)

- settime=true;

- if (settime)

- SetFileTime(h,&ze.ctime,&ze.atime,&ze.mtime);

- if (flags!=ZIP_HANDLE)

- CloseHandle(h);

- if (unzCloseCurrentFile(uf) == UNZ_CRCERROR)

- return ZR_CORRUPT;

- if (haderr)

- return ZR_WRITE;

- return ZR_OK;

-}

-

-ZRESULT TUnzip::Close()

-{ if (currentfile!=-1) unzCloseCurrentFile(uf); currentfile=-1;

- if (uf!=0) unzClose(uf); uf=0;

- return ZR_OK;

-}

-

-

-

-

-

-ZRESULT lasterrorU=ZR_OK;

-

-unsigned int FormatZipMessageU(ZRESULT code, char *buf,unsigned int len)

-{ if (code==ZR_RECENT) code=lasterrorU;

- const char *msg="unknown zip result code";

- switch (code)

- { case ZR_OK: msg="Success"; break;

- case ZR_NODUPH: msg="Culdn't duplicate handle"; break;

- case ZR_NOFILE: msg="Couldn't create/open file"; break;

- case ZR_NOALLOC: msg="Failed to allocate memory"; break;

- case ZR_WRITE: msg="Error writing to file"; break;

- case ZR_NOTFOUND: msg="File not found in the zipfile"; break;

- case ZR_MORE: msg="Still more data to unzip"; break;

- case ZR_CORRUPT: msg="Zipfile is corrupt or not a zipfile"; break;

- case ZR_READ: msg="Error reading file"; break;

- case ZR_ARGS: msg="Caller: faulty arguments"; break;

- case ZR_PARTIALUNZ: msg="Caller: the file had already been partially unzipped"; break;

- case ZR_NOTMMAP: msg="Caller: can only get memory of a memory zipfile"; break;

- case ZR_MEMSIZE: msg="Caller: not enough space allocated for memory zipfile"; break;

- case ZR_FAILED: msg="Caller: there was a previous error"; break;

- case ZR_ENDED: msg="Caller: additions to the zip have already been ended"; break;

- case ZR_ZMODE: msg="Caller: mixing creation and opening of zip"; break;

- case ZR_NOTINITED: msg="Zip-bug: internal initialisation not completed"; break;

- case ZR_SEEK: msg="Zip-bug: trying to seek the unseekable"; break;

- case ZR_MISSIZE: msg="Zip-bug: the anticipated size turned out wrong"; break;

- case ZR_NOCHANGE: msg="Zip-bug: tried to change mind, but not allowed"; break;

- case ZR_FLATE: msg="Zip-bug: an internal error during flation"; break;

- }

- unsigned int mlen=(unsigned int)strlen(msg);

- if (buf==0 || len==0) return mlen;

- unsigned int n=mlen; if (n+1>len) n=len-1;

- strncpy(buf,msg,n); buf[n]=0;

- return mlen;

-}

-

-

-typedef struct

-{ DWORD flag;

- TUnzip *unz;

-} TUnzipHandleData;

-

-HZIP OpenZipU(void *z,unsigned int len,DWORD flags)

-{

- TUnzip *unz = new TUnzip();

- lasterrorU = unz->Open(z,len,flags);

- if (lasterrorU!=ZR_OK)

- {

- delete unz;

- return 0;

- }

- TUnzipHandleData *han = new TUnzipHandleData;

- han->flag=1;

- han->unz=unz;

- return (HZIP)han;

-}

-

-ZRESULT GetZipItemA(HZIP hz, int index, ZIPENTRY *ze)

-{

- if (hz==0)

- {

- lasterrorU=ZR_ARGS;

- return ZR_ARGS;

- }

- TUnzipHandleData *han = (TUnzipHandleData*)hz;

- if (han->flag!=1)

- {

- lasterrorU=ZR_ZMODE;

- return ZR_ZMODE;

- }

- TUnzip *unz = han->unz;

- lasterrorU = unz->Get(index,ze);

- return lasterrorU;

-}

-

-ZRESULT GetZipItemW(HZIP hz, int index, ZIPENTRYW *zew)

-{

- if (hz==0)

- {

- lasterrorU=ZR_ARGS;

- return ZR_ARGS;

- }

- TUnzipHandleData *han = (TUnzipHandleData*)hz;

- if (han->flag!=1)

- {

- lasterrorU=ZR_ZMODE;

- return ZR_ZMODE;

- }

- TUnzip *unz = han->unz;

- ZIPENTRY ze;

- lasterrorU = unz->Get(index,&ze);

- if (lasterrorU == ZR_OK)

- {

- zew->index = ze.index;

- zew->attr = ze.attr;

- zew->atime = ze.atime;

- zew->ctime = ze.ctime;

- zew->mtime = ze.mtime;

- zew->comp_size = ze.comp_size;

- zew->unc_size = ze.unc_size;

-#ifdef _UNICODE

- GetUnicodeFileName(ze.name, zew->name, MAX_PATH-1);

-#else

- strcpy(zew->name, ze.name);

-#endif

- }

- return lasterrorU;

-}

-

-ZRESULT FindZipItemA(HZIP hz, const TCHAR *name, bool ic, int *index, ZIPENTRY *ze)

-{

- if (hz==0)

- {

- lasterrorU=ZR_ARGS;

- return ZR_ARGS;

- }

- TUnzipHandleData *han = (TUnzipHandleData*)hz;

- if (han->flag!=1)

- {

- lasterrorU=ZR_ZMODE;

- return ZR_ZMODE;

- }

- TUnzip *unz = han->unz;

- lasterrorU = unz->Find(name,ic,index,ze);

- return lasterrorU;

-}

-

-ZRESULT FindZipItemW(HZIP hz, const TCHAR *name, bool ic, int *index, ZIPENTRYW *zew)

-{

- if (hz==0)

- {

- lasterrorU=ZR_ARGS;

- return ZR_ARGS;

- }

- TUnzipHandleData *han = (TUnzipHandleData*)hz;

- if (han->flag!=1)

- {

- lasterrorU=ZR_ZMODE;

- return ZR_ZMODE;

- }

- TUnzip *unz = han->unz;

- ZIPENTRY ze;

- lasterrorU = unz->Find(name,ic,index,&ze);

- if (lasterrorU == ZR_OK)

- {

- zew->index = ze.index;

- zew->attr = ze.attr;

- zew->atime = ze.atime;

- zew->ctime = ze.ctime;

- zew->mtime = ze.mtime;

- zew->comp_size = ze.comp_size;

- zew->unc_size = ze.unc_size;

-#ifdef _UNICODE

- GetUnicodeFileName(ze.name, zew->name, MAX_PATH-1);

-#else

- strcpy(zew->name, ze.name);

-#endif

- }

-

- return lasterrorU;

-}

-

-ZRESULT UnzipItem(HZIP hz, int index, void *dst, unsigned int len, DWORD flags)

-{

- if (hz==0)

- {

- lasterrorU=ZR_ARGS;

- return ZR_ARGS;

- }

- TUnzipHandleData *han = (TUnzipHandleData*)hz;

- if (han->flag!=1)

- {

- lasterrorU=ZR_ZMODE;

- return ZR_ZMODE;

- }

- TUnzip *unz = han->unz;

- lasterrorU = unz->Unzip(index,dst,len,flags);

- return lasterrorU;

-}

-

-ZRESULT CloseZipU(HZIP hz)

-{ if (hz==0) {lasterrorU=ZR_ARGS;return ZR_ARGS;}

- TUnzipHandleData *han = (TUnzipHandleData*)hz;

- if (han->flag!=1) {lasterrorU=ZR_ZMODE;return ZR_ZMODE;}

- TUnzip *unz = han->unz;

- lasterrorU = unz->Close();

- delete unz;

- delete han;

- return lasterrorU;

-}

-

-bool IsZipHandleU(HZIP hz)

-{ if (hz==0) return true;

- TUnzipHandleData *han = (TUnzipHandleData*)hz;

- return (han->flag==1);

-}

-

-

-// XUnzip.h Version 1.3

-//

-// Authors: Mark Adler et al. (see below)

-//

-// Modified by: Lucian Wischik

-// lu@wischik.com

-//

-// Version 1.0 - Turned C files into just a single CPP file

-// - Made them compile cleanly as C++ files

-// - Gave them simpler APIs

-// - Added the ability to zip/unzip directly in memory without

-// any intermediate files

-//

-// Modified by: Hans Dietrich

-// hdietrich@gmail.com

-//

-///////////////////////////////////////////////////////////////////////////////

-//

-// Lucian Wischik's comments:

-// --------------------------

-// THIS FILE is almost entirely based upon code by info-zip.

-// It has been modified by Lucian Wischik.

-// The original code may be found at http://www.info-zip.org

-// The original copyright text follows.

-//

-///////////////////////////////////////////////////////////////////////////////

-//

-// Original authors' comments:

-// ---------------------------

-// This is version 2002-Feb-16 of the Info-ZIP copyright and license. The

-// definitive version of this document should be available at

-// ftp://ftp.info-zip.org/pub/infozip/license.html indefinitely.

-//

-// Copyright (c) 1990-2002 Info-ZIP. All rights reserved.

-//

-// For the purposes of this copyright and license, "Info-ZIP" is defined as

-// the following set of individuals:

-//

-// Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois,

-// Jean-loup Gailly, Hunter Goatley, Ian Gorman, Chris Herborth, Dirk Haase,

-// Greg Hartwig, Robert Heath, Jonathan Hudson, Paul Kienitz,

-// David Kirschbaum, Johnny Lee, Onno van der Linden, Igor Mandrichenko,

-// Steve P. Miller, Sergio Monesi, Keith Owens, George Petrov, Greg Roelofs,

-// Kai Uwe Rommel, Steve Salisbury, Dave Smith, Christian Spieler,

-// Antoine Verheijen, Paul von Behren, Rich Wales, Mike White

-//

-// This software is provided "as is", without warranty of any kind, express

-// or implied. In no event shall Info-ZIP or its contributors be held liable

-// for any direct, indirect, incidental, special or consequential damages

-// arising out of the use of or inability to use this software.

-//

-// Permission is granted to anyone to use this software for any purpose,

-// including commercial applications, and to alter it and redistribute it

-// freely, subject to the following restrictions:

-//

-// 1. Redistributions of source code must retain the above copyright notice,

-// definition, disclaimer, and this list of conditions.

-//

-// 2. Redistributions in binary form (compiled executables) must reproduce

-// the above copyright notice, definition, disclaimer, and this list of

-// conditions in documentation and/or other materials provided with the

-// distribution. The sole exception to this condition is redistribution

-// of a standard UnZipSFX binary as part of a self-extracting archive;

-// that is permitted without inclusion of this license, as long as the

-// normal UnZipSFX banner has not been removed from the binary or disabled.

-//

-// 3. Altered versions--including, but not limited to, ports to new

-// operating systems, existing ports with new graphical interfaces, and

-// dynamic, shared, or static library versions--must be plainly marked

-// as such and must not be misrepresented as being the original source.

-// Such altered versions also must not be misrepresented as being

-// Info-ZIP releases--including, but not limited to, labeling of the

-// altered versions with the names "Info-ZIP" (or any variation thereof,

-// including, but not limited to, different capitalizations),

-// "Pocket UnZip", "WiZ" or "MacZip" without the explicit permission of

-// Info-ZIP. Such altered versions are further prohibited from

-// misrepresentative use of the Zip-Bugs or Info-ZIP e-mail addresses or

-// of the Info-ZIP URL(s).

-//

-// 4. Info-ZIP retains the right to use the names "Info-ZIP", "Zip", "UnZip",

-// "UnZipSFX", "WiZ", "Pocket UnZip", "Pocket Zip", and "MacZip" for its

-// own source and binary releases.

-//

-///////////////////////////////////////////////////////////////////////////////

-

-#ifndef XUNZIP_H

-#define XUNZIP_H

-

-

-#ifndef XZIP_H

-DECLARE_HANDLE(HZIP); // An HZIP identifies a zip file that has been opened

-#endif

-

-typedef DWORD ZRESULT;

-// return codes from any of the zip functions. Listed later.

-

-#define ZIP_HANDLE 1

-#define ZIP_FILENAME 2

-#define ZIP_MEMORY 3

-

-typedef struct

-{ int index; // index of this file within the zip

- char name[MAX_PATH]; // filename within the zip

- DWORD attr; // attributes, as in GetFileAttributes.

- FILETIME atime,ctime,mtime;// access, create, modify filetimes

- long comp_size; // sizes of item, compressed and uncompressed. These

- long unc_size; // may be -1 if not yet known (e.g. being streamed in)

-} ZIPENTRY;

-

-typedef struct

-{ int index; // index of this file within the zip

- TCHAR name[MAX_PATH]; // filename within the zip

- DWORD attr; // attributes, as in GetFileAttributes.

- FILETIME atime,ctime,mtime;// access, create, modify filetimes

- long comp_size; // sizes of item, compressed and uncompressed. These

- long unc_size; // may be -1 if not yet known (e.g. being streamed in)

-} ZIPENTRYW;

-

-

-///////////////////////////////////////////////////////////////////////////////

-//

-// OpenZip()

-//

-// Purpose: Open an existing zip archive file

-//

-// Parameters: z - archive file name if flags is ZIP_FILENAME; for other

-// uses see below

-// len - for memory (ZIP_MEMORY) should be the buffer size;

-// for other uses, should be 0

-// flags - indicates usage, see below; for files, this will be

-// ZIP_FILENAME

-//

-// Returns: HZIP - non-zero if zip archive opened ok, otherwise 0

-//

-HZIP OpenZip(void *z, unsigned int len, DWORD flags);

-// OpenZip - opens a zip file and returns a handle with which you can

-// subsequently examine its contents. You can open a zip file from:

-// from a pipe: OpenZip(hpipe_read,0, ZIP_HANDLE);

-// from a file (by handle): OpenZip(hfile,0, ZIP_HANDLE);

-// from a file (by name): OpenZip("c:\\test.zip",0, ZIP_FILENAME);

-// from a memory block: OpenZip(bufstart, buflen, ZIP_MEMORY);

-// If the file is opened through a pipe, then items may only be

-// accessed in increasing order, and an item may only be unzipped once,

-// although GetZipItem can be called immediately before and after unzipping

-// it. If it's opened i n any other way, then full random access is possible.

-// Note: pipe input is not yet implemented.

-

-

-///////////////////////////////////////////////////////////////////////////////

-//

-// GetZipItem()

-//

-// Purpose: Get information about an item in an open zip archive

-//

-// Parameters: hz - handle of open zip archive

-// index - index number (0 based) of item in zip

-// ze - pointer to a ZIPENTRY (if ANSI) or ZIPENTRYW struct

-// (if Unicode)

-//

-// Returns: ZRESULT - ZR_OK if success, otherwise some other value

-//

-

-#ifdef _UNICODE

-#define GetZipItem GetZipItemW

-#else

-#define GetZipItem GetZipItemA

-#endif

-

-ZRESULT GetZipItemA(HZIP hz, int index, ZIPENTRY *ze);

-ZRESULT GetZipItemW(HZIP hz, int index, ZIPENTRYW *ze);

-// GetZipItem - call this to get information about an item in the zip.

-// If index is -1 and the file wasn't opened through a pipe,

-// then it returns information about the whole zipfile

-// (and in particular ze.index returns the number of index items).

-// Note: the item might be a directory (ze.attr & FILE_ATTRIBUTE_DIRECTORY)

-// See below for notes on what happens when you unzip such an item.

-// Note: if you are opening the zip through a pipe, then random access

-// is not possible and GetZipItem(-1) fails and you can't discover the number

-// of items except by calling GetZipItem on each one of them in turn,

-// starting at 0, until eventually the call fails. Also, in the event that

-// you are opening through a pipe and the zip was itself created into a pipe,

-// then then comp_size and sometimes unc_size as well may not be known until

-// after the item has been unzipped.

-

-

-///////////////////////////////////////////////////////////////////////////////

-//

-// FindZipItem()

-//

-// Purpose: Find item by name and return information about it

-//

-// Parameters: hz - handle of open zip archive

-// name - name of file to look for inside zip archive

-// ic - TRUE = case insensitive

-// index - pointer to index number returned, or -1

-// ze - pointer to a ZIPENTRY (if ANSI) or ZIPENTRYW struct

-// (if Unicode)

-//

-// Returns: ZRESULT - ZR_OK if success, otherwise some other value

-//

-

-#ifdef _UNICODE

-#define FindZipItem FindZipItemW

-#else

-#define FindZipItem FindZipItemA

-#endif

-

-ZRESULT FindZipItemA(HZIP hz, const TCHAR *name, bool ic, int *index, ZIPENTRY *ze);

-ZRESULT FindZipItemW(HZIP hz, const TCHAR *name, bool ic, int *index, ZIPENTRYW *ze);

-// FindZipItem - finds an item by name. ic means 'insensitive to case'.

-// It returns the index of the item, and returns information about it.

-// If nothing was found, then index is set to -1 and the function returns

-// an error code.

-

-

-///////////////////////////////////////////////////////////////////////////////

-//

-// UnzipItem()

-//

-// Purpose: Find item by index and unzip it

-//

-// Parameters: hz - handle of open zip archive

-// index - index number of file to unzip

-// dst - target file name of unzipped file

-// len - for memory (ZIP_MEMORY. length of buffer;

-// otherwise 0

-// flags - indicates usage, see below; for files, this will be

-// ZIP_FILENAME

-//

-// Returns: ZRESULT - ZR_OK if success, otherwise some other value

-//

-

-ZRESULT UnzipItem(HZIP hz, int index, void *dst, unsigned int len, DWORD flags);

-// UnzipItem - given an index to an item, unzips it. You can unzip to:

-// to a pipe: UnzipItem(hz,i, hpipe_write,0,ZIP_HANDLE);

-// to a file (by handle): UnzipItem(hz,i, hfile,0,ZIP_HANDLE);

-// to a file (by name): UnzipItem(hz,i, ze.name,0,ZIP_FILENAME);

-// to a memory block: UnzipItem(hz,i, buf,buflen,ZIP_MEMORY);

-// In the final case, if the buffer isn't large enough to hold it all,

-// then the return code indicates that more is yet to come. If it was

-// large enough, and you want to know precisely how big, GetZipItem.

-// Note: zip files are normally stored with relative pathnames. If you

-// unzip with ZIP_FILENAME a relative pathname then the item gets created

-// relative to the current directory - it first ensures that all necessary

-// subdirectories have been created. Also, the item may itself be a directory.

-// If you unzip a directory with ZIP_FILENAME, then the directory gets created.

-// If you unzip it to a handle or a memory block, then nothing gets created

-// and it emits 0 bytes.

-

-

-///////////////////////////////////////////////////////////////////////////////

-//

-// CloseZip()

-//

-// Purpose: Close an open zip archive

-//

-// Parameters: hz - handle to an open zip archive

-//

-// Returns: ZRESULT - ZR_OK if success, otherwise some other value

-//

-ZRESULT CloseZip(HZIP hz);

-// CloseZip - the zip handle must be closed with this function.

-

-unsigned int FormatZipMessage(ZRESULT code, char *buf,unsigned int len);

-// FormatZipMessage - given an error code, formats it as a string.

-// It returns the length of the error message. If buf/len points

-// to a real buffer, then it also writes as much as possible into there.

-

-

-// These are the result codes:

-#define ZR_OK 0x00000000 // nb. the pseudo-code zr-recent is never returned,

-#define ZR_RECENT 0x00000001 // but can be passed to FormatZipMessage.

-// The following come from general system stuff (e.g. files not openable)

-#define ZR_GENMASK 0x0000FF00

-#define ZR_NODUPH 0x00000100 // couldn't duplicate the handle

-#define ZR_NOFILE 0x00000200 // couldn't create/open the file

-#define ZR_NOALLOC 0x00000300 // failed to allocate some resource

-#define ZR_WRITE 0x00000400 // a general error writing to the file

-#define ZR_NOTFOUND 0x00000500 // couldn't find that file in the zip

-#define ZR_MORE 0x00000600 // there's still more data to be unzipped

-#define ZR_CORRUPT 0x00000700 // the zipfile is corrupt or not a zipfile

-#define ZR_READ 0x00000800 // a general error reading the file

-// The following come from mistakes on the part of the caller

-#define ZR_CALLERMASK 0x00FF0000

-#define ZR_ARGS 0x00010000 // general mistake with the arguments

-#define ZR_NOTMMAP 0x00020000 // tried to ZipGetMemory, but that only works on mmap zipfiles, which yours wasn't

-#define ZR_MEMSIZE 0x00030000 // the memory size is too small

-#define ZR_FAILED 0x00040000 // the thing was already failed when you called this function

-#define ZR_ENDED 0x00050000 // the zip creation has already been closed

-#define ZR_MISSIZE 0x00060000 // the indicated input file size turned out mistaken

-#define ZR_PARTIALUNZ 0x00070000 // the file had already been partially unzipped

-#define ZR_ZMODE 0x00080000 // tried to mix creating/opening a zip

-// The following come from bugs within the zip library itself

-#define ZR_BUGMASK 0xFF000000

-#define ZR_NOTINITED 0x01000000 // initialisation didn't work

-#define ZR_SEEK 0x02000000 // trying to seek in an unseekable file

-#define ZR_NOCHANGE 0x04000000 // changed its mind on storage, but not allowed

-#define ZR_FLATE 0x05000000 // an internal error in the de/inflation code

-

-

-

-

-

-// e.g.

-//

-// SetCurrentDirectory("c:\\docs\\stuff");

-// HZIP hz = OpenZip("c:\\stuff.zip",0,ZIP_FILENAME);

-// ZIPENTRY ze; GetZipItem(hz,-1,&ze); int numitems=ze.index;

-// for (int i=0; i<numitems; i++)

-// { GetZipItem(hz,i,&ze);

-// UnzipItem(hz,i,ze.name,0,ZIP_FILENAME);

-// }

-// CloseZip(hz);

-//

-//

-// HRSRC hrsrc = FindResource(hInstance,MAKEINTRESOURCE(1),RT_RCDATA);

-// HANDLE hglob = LoadResource(hInstance,hrsrc);

-// void *zipbuf=LockResource(hglob);

-// unsigned int ziplen=SizeofResource(hInstance,hrsrc);

-// HZIP hz = OpenZip(zipbuf, ziplen, ZIP_MEMORY);

-// - unzip to a membuffer -

-// ZIPENTRY ze; int i; FindZipItem(hz,"file.dat",&i,&ze);

-// char *ibuf = new char[ze.unc_size];

-// UnzipItem(hz,i, ibuf, ze.unc_size,ZIP_MEMORY);

-// delete[] buf;

-// - unzip to a fixed membuff -

-// ZIPENTRY ze; int i; FindZipItem(hz,"file.dat",&i,&ze);

-// char ibuf[1024]; ZIPRESULT zr=ZR_MORE; unsigned long totsize=0;

-// while (zr==ZR_MORE)

-// { zr = UnzipItem(hz,i, ibuf,1024,ZIP_MEMORY);

-// unsigned long bufsize=1024; if (zr==ZR_OK) bufsize=ze.unc_size-totsize;

-// totsize+=bufsize;

-// }

-// - unzip to a pipe -

-// HANDLE hthread=CreateWavReaderThread(&hread,&hwrite);

-// FindZipItem(hz,"sound.wav",&i,&ze);

-// UnzipItem(hz,i, hwrite,0,ZIP_HANDLE);

-// CloseHandle(hwrite);

-// WaitForSingleObject(hthread,INFINITE);

-// CloseHandle(hread); CloseHandle(hthread);

-// - finished -

-// CloseZip(hz);

-// // note: no need to free resources obtained through Find/Load/LockResource

-//

-//

-// SetCurrentDirectory("c:\\docs\\pipedzipstuff");

-// HANDLE hread,hwrite; CreatePipe(&hread,&hwrite);

-// CreateZipWriterThread(hwrite);

-// HZIP hz = OpenZip(hread,0,ZIP_HANDLE);

-// for (int i=0; ; i++)

-// { ZIPENTRY ze; ZRESULT res = GetZipItem(hz,i,&ze);

-// if (res!=ZE_OK) break; // no more

-// UnzipItem(hz,i, ze.name,0,ZIP_FILENAME);

-// }

-// CloseZip(hz);

-//

-

-

-

-

-// Now we indulge in a little skullduggery so that the code works whether

-// the user has included just zip or both zip and unzip.

-// Idea: if header files for both zip and unzip are present, then presumably

-// the cpp files for zip and unzip are both present, so we will call

-// one or the other of them based on a dynamic choice. If the header file

-// for only one is present, then we will bind to that particular one.

-HZIP OpenZipU(void *z,unsigned int len,DWORD flags);

-ZRESULT CloseZipU(HZIP hz);

-unsigned int FormatZipMessageU(ZRESULT code, char *buf,unsigned int len);

-bool IsZipHandleU(HZIP hz);

-#define OpenZip OpenZipU

-

-#ifdef XZIP_H

-#undef CloseZip

-#define CloseZip(hz) (IsZipHandleU(hz)?CloseZipU(hz):CloseZipZ(hz))

-#else

-#define CloseZip CloseZipU

-#define FormatZipMessage FormatZipMessageU

-#endif

-

-

-#endif //XUNZIP_H

-// XZip.cpp Version 1.3

-//

-// Authors: Mark Adler et al. (see below)

-//

-// Modified by: Lucian Wischik

-// lu@wischik.com

-//

-// Version 1.0 - Turned C files into just a single CPP file

-// - Made them compile cleanly as C++ files

-// - Gave them simpler APIs

-// - Added the ability to zip/unzip directly in memory without

-// any intermediate files

-//

-// Modified by: Hans Dietrich

-// hdietrich@gmail.com

-//

-// Version 1.3: - Fixed UTC problem

-//

-// Version 1.2: - Many bug fixes. See CodeProject article for list.

-//

-// Version 1.1: - Added Unicode support to CreateZip() and ZipAdd()

-// - Changed file names to avoid conflicts with Lucian's files

-//

-///////////////////////////////////////////////////////////////////////////////

-//

-// Lucian Wischik's comments:

-// --------------------------

-// THIS FILE is almost entirely based upon code by Info-ZIP.

-// It has been modified by Lucian Wischik.

-// The original code may be found at http://www.info-zip.org

-// The original copyright text follows.

-//

-///////////////////////////////////////////////////////////////////////////////

-//

-// Original authors' comments:

-// ---------------------------

-// This is version 2002-Feb-16 of the Info-ZIP copyright and license. The

-// definitive version of this document should be available at

-// ftp://ftp.info-zip.org/pub/infozip/license.html indefinitely.

-//

-// Copyright (c) 1990-2002 Info-ZIP. All rights reserved.

-//

-// For the purposes of this copyright and license, "Info-ZIP" is defined as

-// the following set of individuals:

-//

-// Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois,

-// Jean-loup Gailly, Hunter Goatley, Ian Gorman, Chris Herborth, Dirk Haase,

-// Greg Hartwig, Robert Heath, Jonathan Hudson, Paul Kienitz,

-// David Kirschbaum, Johnny Lee, Onno van der Linden, Igor Mandrichenko,

-// Steve P. Miller, Sergio Monesi, Keith Owens, George Petrov, Greg Roelofs,

-// Kai Uwe Rommel, Steve Salisbury, Dave Smith, Christian Spieler,

-// Antoine Verheijen, Paul von Behren, Rich Wales, Mike White

-//

-// This software is provided "as is", without warranty of any kind, express

-// or implied. In no event shall Info-ZIP or its contributors be held liable

-// for any direct, indirect, incidental, special or consequential damages

-// arising out of the use of or inability to use this software.

-//

-// Permission is granted to anyone to use this software for any purpose,

-// including commercial applications, and to alter it and redistribute it

-// freely, subject to the following restrictions:

-//

-// 1. Redistributions of source code must retain the above copyright notice,

-// definition, disclaimer, and this list of conditions.

-//

-// 2. Redistributions in binary form (compiled executables) must reproduce

-// the above copyright notice, definition, disclaimer, and this list of

-// conditions in documentation and/or other materials provided with the

-// distribution. The sole exception to this condition is redistribution

-// of a standard UnZipSFX binary as part of a self-extracting archive;

-// that is permitted without inclusion of this license, as long as the

-// normal UnZipSFX banner has not been removed from the binary or disabled.

-//

-// 3. Altered versions--including, but not limited to, ports to new

-// operating systems, existing ports with new graphical interfaces, and

-// dynamic, shared, or static library versions--must be plainly marked

-// as such and must not be misrepresented as being the original source.

-// Such altered versions also must not be misrepresented as being

-// Info-ZIP releases--including, but not limited to, labeling of the

-// altered versions with the names "Info-ZIP" (or any variation thereof,

-// including, but not limited to, different capitalizations),

-// "Pocket UnZip", "WiZ" or "MacZip" without the explicit permission of

-// Info-ZIP. Such altered versions are further prohibited from

-// misrepresentative use of the Zip-Bugs or Info-ZIP e-mail addresses or

-// of the Info-ZIP URL(s).

-//

-// 4. Info-ZIP retains the right to use the names "Info-ZIP", "Zip", "UnZip",

-// "UnZipSFX", "WiZ", "Pocket UnZip", "Pocket Zip", and "MacZip" for its

-// own source and binary releases.

-//

-///////////////////////////////////////////////////////////////////////////////

-

-#ifndef _WIN64

-#define _USE_32BIT_TIME_T //+++1.2

-#endif

-

-

-#define STRICT

-#define WIN32_LEAN_AND_MEAN

-#include <windows.h>

-#include <tchar.h>

-#include <time.h>

-#include "xzip.h"

-

-#pragma warning(disable : 4996) // disable bogus deprecation warning

-

-typedef unsigned char uch; // unsigned 8-bit value

-typedef unsigned short ush; // unsigned 16-bit value

-typedef unsigned long ulg; // unsigned 32-bit value

-typedef size_t extent; // file size

-typedef unsigned Pos; // must be at least 32 bits

-typedef unsigned IPos; // A Pos is an index in the character window. Pos is used only for parameter passing

-

-#ifndef EOF

-#define EOF (-1)

-#endif

-

-

-// Error return values. The values 0..4 and 12..18 follow the conventions

-// of PKZIP. The values 4..10 are all assigned to "insufficient memory"

-// by PKZIP, so the codes 5..10 are used here for other purposes.

-#define ZE_MISS -1 // used by procname(), zipbare()

-#define ZE_OK 0 // success

-#define ZE_EOF 2 // unexpected end of zip file

-#define ZE_FORM 3 // zip file structure error

-#define ZE_MEM 4 // out of memory

-#define ZE_LOGIC 5 // internal logic error

-#define ZE_BIG 6 // entry too large to split

-#define ZE_NOTE 7 // invalid comment format

-#define ZE_TEST 8 // zip test (-T) failed or out of memory

-#define ZE_ABORT 9 // user interrupt or termination

-#define ZE_TEMP 10 // error using a temp file

-#define ZE_READ 11 // read or seek error

-#define ZE_NONE 12 // nothing to do

-#define ZE_NAME 13 // missing or empty zip file

-#define ZE_WRITE 14 // error writing to a file

-#define ZE_CREAT 15 // couldn't open to write

-#define ZE_PARMS 16 // bad command line

-#define ZE_OPEN 18 // could not open a specified file to read

-#define ZE_MAXERR 18 // the highest error number

-

-

-// internal file attribute

-#define UNKNOWN (-1)

-#define BINARY 0

-#define ASCII 1

-

-#define BEST -1 // Use best method (deflation or store)

-#define STORE 0 // Store method

-#define DEFLATE 8 // Deflation method

-

-#define CRCVAL_INITIAL 0L

-

-// MSDOS file or directory attributes

-#define MSDOS_HIDDEN_ATTR 0x02

-#define MSDOS_DIR_ATTR 0x10

-

-// Lengths of headers after signatures in bytes

-#define LOCHEAD 26

-#define CENHEAD 42

-#define ENDHEAD 18

-

-// Definitions for extra field handling:

-#define EB_HEADSIZE 4 /* length of a extra field block header */

-#define EB_LEN 2 /* offset of data length field in header */

-#define EB_UT_MINLEN 1 /* minimal UT field contains Flags byte */

-#define EB_UT_FLAGS 0 /* byte offset of Flags field */

-#define EB_UT_TIME1 1 /* byte offset of 1st time value */

-#define EB_UT_FL_MTIME (1 << 0) /* mtime present */

-#define EB_UT_FL_ATIME (1 << 1) /* atime present */

-#define EB_UT_FL_CTIME (1 << 2) /* ctime present */

-#define EB_UT_LEN(n) (EB_UT_MINLEN + 4 * (n))

-#define EB_L_UT_SIZE (EB_HEADSIZE + EB_UT_LEN(3))

-#define EB_C_UT_SIZE (EB_HEADSIZE + EB_UT_LEN(1))

-

-

-// Macros for writing machine integers to little-endian format

-#define PUTSH(a,f) {char _putsh_c=(char)((a)&0xff); wfunc(param,&_putsh_c,1); _putsh_c=(char)((a)>>8); wfunc(param,&_putsh_c,1);}

-#define PUTLG(a,f) {PUTSH((a) & 0xffff,(f)) PUTSH((a) >> 16,(f))}

-

-

-// -- Structure of a ZIP file --

-// Signatures for zip file information headers

-#define LOCSIG 0x04034b50L

-#define CENSIG 0x02014b50L

-#define ENDSIG 0x06054b50L

-#define EXTLOCSIG 0x08074b50L

-

-

-#define MIN_MATCH 3

-#define MAX_MATCH 258

-// The minimum and maximum match lengths

-

-

-#define WSIZE (0x8000)

-// Maximum window size = 32K. If you are really short of memory, compile

-// with a smaller WSIZE but this reduces the compression ratio for files

-// of size > WSIZE. WSIZE must be a power of two in the current implementation.

-//

-

-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)

-// Minimum amount of lookahead, except at the end of the input file.

-// See deflate.c for comments about the MIN_MATCH+1.

-//

-

-#define MAX_DIST (WSIZE-MIN_LOOKAHEAD)

-// In order to simplify the code, particularly on 16 bit machines, match

-// distances are limited to MAX_DIST instead of WSIZE.

-//

-

-

-

-

-

-// ===========================================================================

-// Constants

-//

-

-#define MAX_BITS 15

-// All codes must not exceed MAX_BITS bits

-

-#define MAX_BL_BITS 7

-// Bit length codes must not exceed MAX_BL_BITS bits

-

-#define LENGTH_CODES 29

-// number of length codes, not counting the special END_BLOCK code

-

-#define LITERALS 256

-// number of literal bytes 0..255

-

-#define END_BLOCK 256

-// end of block literal code

-

-#define L_CODES (LITERALS+1+LENGTH_CODES)

-// number of Literal or Length codes, including the END_BLOCK code

-

-#define D_CODES 30

-// number of distance codes

-

-#define BL_CODES 19

-// number of codes used to transfer the bit lengths

-

-

-#define STORED_BLOCK 0

-#define STATIC_TREES 1

-#define DYN_TREES 2

-// The three kinds of block type

-

-#define LIT_BUFSIZE 0x8000

-#define DIST_BUFSIZE LIT_BUFSIZE

-// Sizes of match buffers for literals/lengths and distances. There are

-// 4 reasons for limiting LIT_BUFSIZE to 64K:

-// - frequencies can be kept in 16 bit counters

-// - if compression is not successful for the first block, all input data is

-// still in the window so we can still emit a stored block even when input

-// comes from standard input. (This can also be done for all blocks if

-// LIT_BUFSIZE is not greater than 32K.)

-// - if compression is not successful for a file smaller than 64K, we can

-// even emit a stored file instead of a stored block (saving 5 bytes).

-// - creating new Huffman trees less frequently may not provide fast

-// adaptation to changes in the input data statistics. (Take for

-// example a binary file with poorly compressible code followed by

-// a highly compressible string table.) Smaller buffer sizes give

-// fast adaptation but have of course the overhead of transmitting trees

-// more frequently.

-// - I can't count above 4

-// The current code is general and allows DIST_BUFSIZE < LIT_BUFSIZE (to save

-// memory at the expense of compression). Some optimizations would be possible

-// if we rely on DIST_BUFSIZE == LIT_BUFSIZE.

-//

-

-#define REP_3_6 16

-// repeat previous bit length 3-6 times (2 bits of repeat count)

-

-#define REPZ_3_10 17

-// repeat a zero length 3-10 times (3 bits of repeat count)

-

-#define REPZ_11_138 18

-// repeat a zero length 11-138 times (7 bits of repeat count)

-

-#define HEAP_SIZE (2*L_CODES+1)

-// maximum heap size

-

-

-// ===========================================================================

-// Local data used by the "bit string" routines.

-//

-

-#define Buf_size (8 * 2*sizeof(char))

-// Number of bits used within bi_buf. (bi_buf may be implemented on

-// more than 16 bits on some systems.)

-

-// Output a 16 bit value to the bit stream, lower (oldest) byte first

-#if 0 // -----------------------------------------------------------

-#define PUTSHORT(state,w) \

-{ \

- if (state.bs.out_offset >= state.bs.out_size-1) \

- state.flush_outbuf(state.param,state.bs.out_buf, &state.bs.out_offset); \

- state.bs.out_buf[state.bs.out_offset++] = (char) ((w) & 0xff); \

- state.bs.out_buf[state.bs.out_offset++] = (char) ((ush)(w) >> 8); \

-}

-#endif // -----------------------------------------------------------

-

-//+++1.2

-#define PUTSHORT(state,w) \

-{ \

- if (state.bs.out_offset >= state.bs.out_size-1) \

- state.flush_outbuf(state.param,state.bs.out_buf, &state.bs.out_offset); \

- if (state.bs.out_offset < state.bs.out_size-1) \

- { \

- state.bs.out_buf[state.bs.out_offset++] = (char) ((w) & 0xff); \

- state.bs.out_buf[state.bs.out_offset++] = (char) ((ush)(w) >> 8); \

- }\

-}

-

-#if 0 // -----------------------------------------------------------

-#define PUTBYTE(state,b) \

-{ \

- if (state.bs.out_offset >= state.bs.out_size) \

- state.flush_outbuf(state.param,state.bs.out_buf, &state.bs.out_offset); \

- state.bs.out_buf[state.bs.out_offset++] = (char) (b); \

-}

-#endif // -----------------------------------------------------------

-

-//+++1.2

-#define PUTBYTE(state,b) \

-{ \

- if (state.bs.out_offset >= state.bs.out_size) \

- state.flush_outbuf(state.param,state.bs.out_buf, &state.bs.out_offset); \

- if (state.bs.out_offset < state.bs.out_size) \

- state.bs.out_buf[state.bs.out_offset++] = (char) (b); \

-}

-

-// DEFLATE.CPP HEADER

-

-#define HASH_BITS 15

-// For portability to 16 bit machines, do not use values above 15.

-

-#define HASH_SIZE (unsigned)(1<<HASH_BITS)

-#define HASH_MASK (HASH_SIZE-1)

-#define WMASK (WSIZE-1)

-// HASH_SIZE and WSIZE must be powers of two

-

-#define NIL 0

-// Tail of hash chains

-

-#define FAST 4

-#define SLOW 2

-// speed options for the general purpose bit flag

-

-#define TOO_FAR 4096

-// Matches of length 3 are discarded if their distance exceeds TOO_FAR

-

-

-

-#define EQUAL 0

-// result of memcmp for equal strings

-

-

-// ===========================================================================

-// Local data used by the "longest match" routines.

-

-#define H_SHIFT ((HASH_BITS+MIN_MATCH-1)/MIN_MATCH)

-// Number of bits by which ins_h and del_h must be shifted at each

-// input step. It must be such that after MIN_MATCH steps, the oldest

-// byte no longer takes part in the hash key, that is:

-// H_SHIFT * MIN_MATCH >= HASH_BITS

-

-#define max_insert_length max_lazy_match

-// Insert new strings in the hash table only if the match length

-// is not greater than this length. This saves time but degrades compression.

-// max_insert_length is used only for compression levels <= 3.

-

-

-

-const int extra_lbits[LENGTH_CODES] // extra bits for each length code

- = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0};

-

-const int extra_dbits[D_CODES] // extra bits for each distance code

- = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13};

-

-const int extra_blbits[BL_CODES]// extra bits for each bit length code

- = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7};

-

-const uch bl_order[BL_CODES] = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15};

-// The lengths of the bit length codes are sent in order of decreasing

-// probability, to avoid transmitting the lengths for unused bit length codes.

-

-

-typedef struct config {

- ush good_length; // reduce lazy search above this match length

- ush max_lazy; // do not perform lazy search above this match length

- ush nice_length; // quit search above this match length

- ush max_chain;

-} config;

-

-// Values for max_lazy_match, good_match, nice_match and max_chain_length,

-// depending on the desired pack level (0..9). The values given below have

-// been tuned to exclude worst case performance for pathological files.

-// Better values may be found for specific files.

-//

-

-const config configuration_table[10] = {

-// good lazy nice chain

- {0, 0, 0, 0}, // 0 store only

- {4, 4, 8, 4}, // 1 maximum speed, no lazy matches

- {4, 5, 16, 8}, // 2

- {4, 6, 32, 32}, // 3

- {4, 4, 16, 16}, // 4 lazy matches */

- {8, 16, 32, 32}, // 5

- {8, 16, 128, 128}, // 6

- {8, 32, 128, 256}, // 7

- {32, 128, 258, 1024}, // 8

- {32, 258, 258, 4096}};// 9 maximum compression */

-

-// Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4

-// For deflate_fast() (levels <= 3) good is ignored and lazy has a different meaning.

-

-

-

-

-

-// Data structure describing a single value and its code string.

-typedef struct ct_data {

- union {

- ush freq; // frequency count

- ush code; // bit string

- } fc;

- union {

- ush dad; // father node in Huffman tree

- ush len; // length of bit string

- } dl;

-} ct_data;

-

-typedef struct tree_desc

-{

- ct_data *dyn_tree; // the dynamic tree

- ct_data *static_tree; // corresponding static tree or NULL

- const int *extra_bits; // extra bits for each code or NULL

- int extra_base; // base index for extra_bits

- int elems; // max number of elements in the tree

- int max_length; // max bit length for the codes

- int max_code; // largest code with non zero frequency

-} tree_desc;

-

-

-class TTreeState

-{

-public:

- TTreeState();

-

- ct_data dyn_ltree[HEAP_SIZE]; // literal and length tree

- ct_data dyn_dtree[2*D_CODES+1]; // distance tree

- ct_data static_ltree[L_CODES+2]; // the static literal tree...

- // ... Since the bit lengths are imposed, there is no need for the L_CODES

- // extra codes used during heap construction. However the codes 286 and 287

- // are needed to build a canonical tree (see ct_init below).

- ct_data static_dtree[D_CODES]; // the static distance tree...

- // ... (Actually a trivial tree since all codes use 5 bits.)

- ct_data bl_tree[2*BL_CODES+1]; // Huffman tree for the bit lengths

-

- tree_desc l_desc;

- tree_desc d_desc;

- tree_desc bl_desc;

-

- ush bl_count[MAX_BITS+1]; // number of codes at each bit length for an optimal tree

-

- int heap[2*L_CODES+1]; // heap used to build the Huffman trees

- int heap_len; // number of elements in the heap

- int heap_max; // element of largest frequency

- // The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.

- // The same heap array is used to build all trees.

-

- uch depth[2*L_CODES+1];

- // Depth of each subtree used as tie breaker for trees of equal frequency

-

- uch length_code[MAX_MATCH-MIN_MATCH+1];

- // length code for each normalized match length (0 == MIN_MATCH)

-

- uch dist_code[512];

- // distance codes. The first 256 values correspond to the distances

- // 3 .. 258, the last 256 values correspond to the top 8 bits of

- // the 15 bit distances.

-

- int base_length[LENGTH_CODES];

- // First normalized length for each code (0 = MIN_MATCH)

-

- int base_dist[D_CODES];

- // First normalized distance for each code (0 = distance of 1)

-

- uch far l_buf[LIT_BUFSIZE]; // buffer for literals/lengths

- ush far d_buf[DIST_BUFSIZE]; // buffer for distances

-

- uch flag_buf[(LIT_BUFSIZE/8)];

- // flag_buf is a bit array distinguishing literals from lengths in

- // l_buf, and thus indicating the presence or absence of a distance.

-

- unsigned last_lit; // running index in l_buf

- unsigned last_dist; // running index in d_buf

- unsigned last_flags; // running index in flag_buf

- uch flags; // current flags not yet saved in flag_buf

- uch flag_bit; // current bit used in flags

- // bits are filled in flags starting at bit 0 (least significant).

- // Note: these flags are overkill in the current code since we don't

- // take advantage of DIST_BUFSIZE == LIT_BUFSIZE.

-

- ulg opt_len; // bit length of current block with optimal trees

- ulg static_len; // bit length of current block with static trees

-

- ulg cmpr_bytelen; // total byte length of compressed file

- ulg cmpr_len_bits; // number of bits past 'cmpr_bytelen'

-

- ulg input_len; // total byte length of input file

- // input_len is for debugging only since we can get it by other means.

-

- ush *file_type; // pointer to UNKNOWN, BINARY or ASCII

-// int *file_method; // pointer to DEFLATE or STORE

-};

-

-TTreeState::TTreeState()

-{

- tree_desc a = {dyn_ltree, static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS, 0}; l_desc = a;

- tree_desc b = {dyn_dtree, static_dtree, extra_dbits, 0, D_CODES, MAX_BITS, 0}; d_desc = b;

- tree_desc c = {bl_tree, NULL, extra_blbits, 0, BL_CODES, MAX_BL_BITS, 0}; bl_desc = c;

- last_lit = 0;

- last_dist = 0;

- last_flags = 0;

-

- memset(dyn_ltree, 0, sizeof(dyn_ltree));

- memset(dyn_dtree, 0, sizeof(dyn_dtree));

- memset(static_ltree, 0, sizeof(static_ltree));

- memset(static_dtree, 0, sizeof(static_dtree));

- memset(bl_tree, 0, sizeof(bl_tree));

- memset(bl_count, 0, sizeof(bl_count));

- memset(heap, 0, sizeof(heap));

- heap_len = 0;

- heap_max = 0;

-

- memset(depth, 0, sizeof(depth));

- memset(length_code, 0, sizeof(length_code));

- memset(dist_code, 0, sizeof(dist_code));

- memset(base_length, 0, sizeof(base_length));

- memset(base_dist, 0, sizeof(base_dist));

- memset(l_buf, 0, sizeof(l_buf));

- memset(d_buf, 0, sizeof(d_buf));

- memset(flag_buf, 0, sizeof(flag_buf));

-

- last_lit = 0;

- last_dist = 0;

- last_flags = 0;

- flags = 0;

- flag_bit = 0;

- opt_len = 0;

- static_len = 0;

- cmpr_bytelen = 0;

- cmpr_len_bits = 0;

- input_len = 0;

- file_type = 0;

-}

-

-class TBitState

-{

-public:

- TBitState()

- {

- flush_flg = 0;

- bi_buf = 0;

- bi_valid = 0;

- out_buf = 0;

- out_offset = 0;

- out_size = 0;

- bits_sent = 0;

- }

-

- int flush_flg;

- //

- unsigned bi_buf;

- // Output buffer. bits are inserted starting at the bottom (least significant

- // bits). The width of bi_buf must be at least 16 bits.

- int bi_valid;

- // Number of valid bits in bi_buf. All bits above the last valid bit

- // are always zero.

- char *out_buf;

- // Current output buffer.

- unsigned out_offset;

- // Current offset in output buffer.

- // On 16 bit machines, the buffer is limited to 64K.

- unsigned out_size;

- // Size of current output buffer

- ulg bits_sent; // bit length of the compressed data only needed for debugging???

-};

-

-

-class TDeflateState

-{

-public:

- TDeflateState()

- {

- memset(window, 0, sizeof(window));

- memset(prev, 0, sizeof(prev));

- memset(head, 0, sizeof(head));

- window_size = 0;

- block_start = 0;

- sliding = 0;

- ins_h = 0;

- prev_length = 0;

- strstart = 0;

- match_start = 0;

- eofile = 0;

- lookahead = 0;

- max_chain_length = 0;

- max_lazy_match = 0;

- good_match = 0;

- nice_match = 0;

- }

-

- uch window[2L*WSIZE];

- // Sliding window. Input bytes are read into the second half of the window,

- // and move to the first half later to keep a dictionary of at least WSIZE

- // bytes. With this organization, matches are limited to a distance of

- // WSIZE-MAX_MATCH bytes, but this ensures that IO is always

- // performed with a length multiple of the block size. Also, it limits

- // the window size to 64K, which is quite useful on MSDOS.

- // To do: limit the window size to WSIZE+CBSZ if SMALL_MEM (the code would

- // be less efficient since the data would have to be copied WSIZE/CBSZ times)

- Pos prev[WSIZE];

- // Link to older string with same hash index. To limit the size of this

- // array to 64K, this link is maintained only for the last 32K strings.

- // An index in this array is thus a window index modulo 32K.

- Pos head[HASH_SIZE];

- // Heads of the hash chains or NIL. If your compiler thinks that

- // HASH_SIZE is a dynamic value, recompile with -DDYN_ALLOC.

-

- ulg window_size;

- // window size, 2*WSIZE except for MMAP or BIG_MEM, where it is the

- // input file length plus MIN_LOOKAHEAD.

-

- long block_start;

- // window position at the beginning of the current output block. Gets

- // negative when the window is moved backwards.

-

- int sliding;

- // Set to false when the input file is already in memory

-

- unsigned ins_h; // hash index of string to be inserted

-

- unsigned int prev_length;

- // Length of the best match at previous step. Matches not greater than this

- // are discarded. This is used in the lazy match evaluation.

-

- unsigned strstart; // start of string to insert

- unsigned match_start; // start of matching string

- int eofile; // flag set at end of input file

- unsigned lookahead; // number of valid bytes ahead in window

-

- unsigned max_chain_length;

- // To speed up deflation, hash chains are never searched beyond this length.

- // A higher limit improves compression ratio but degrades the speed.

-

- unsigned int max_lazy_match;

- // Attempt to find a better match only when the current match is strictly

- // smaller than this value. This mechanism is used only for compression

- // levels >= 4.

-

- unsigned good_match;

- // Use a faster search when the previous match is longer than this

-

- int nice_match; // Stop searching when current match exceeds this

-};

-

-

-typedef struct iztimes {

- __time32_t atime,mtime,ctime;

-} iztimes; // access, modify, create times

-

-typedef struct zlist {

- ush vem, ver, flg, how; // See central header in zipfile.c for what vem..off are

- ulg tim, crc, siz, len;

- extent nam, ext, cext, com; // offset of ext must be >= LOCHEAD

- ush dsk, att, lflg; // offset of lflg must be >= LOCHEAD

- ulg atx, off;

- char name[MAX_PATH]; // File name in zip file

- char *extra; // Extra field (set only if ext != 0)

- char *cextra; // Extra in central (set only if cext != 0)

- char *comment; // Comment (set only if com != 0)

- char iname[MAX_PATH]; // Internal file name after cleanup

- char zname[MAX_PATH]; // External version of internal name

- int mark; // Marker for files to operate on

- // int trash; // Marker for files to delete

- int dosflag; // Set to force MSDOS file attributes

- struct zlist far *nxt; // Pointer to next header in list

-} TZipFileInfo;

-

-

-class TState;

-typedef unsigned (*READFUNC)(TState &state, char *buf,unsigned size);

-typedef unsigned (*FLUSHFUNC)(void *param, const char *buf, unsigned *size);

-typedef unsigned (*WRITEFUNC)(void *param, const char *buf, unsigned size);

-

-class TState

-{

-public:

- TState() //+++1.2

- {

- param = 0;

- level = 0;

- seekable = FALSE;

- readfunc = 0;

- flush_outbuf = 0;

- err = 0;

- }

-

- void *param;

- int level;

- bool seekable;

- READFUNC readfunc;

- FLUSHFUNC flush_outbuf;

- TTreeState ts;

- TBitState bs;

- TDeflateState ds;

- const char *err;

-};

-

-void Assert(TState &state,bool cond, const char *msg)

-{ if (cond) return;

- state.err=msg;

-}

-void __cdecl Trace(const char *x, ...) {va_list paramList; va_start(paramList, x); paramList; va_end(paramList);}

-void __cdecl Tracec(bool ,const char *x, ...) {va_list paramList; va_start(paramList, x); paramList; va_end(paramList);}

-

-// ===========================================================================

-// Local (static) routines in this file.

-//

-

-void init_block (TState &);

-void pqdownheap (TState &,ct_data *tree, int k);

-void gen_bitlen (TState &,tree_desc *desc);

-void gen_codes (TState &state,ct_data *tree, int max_code);

-void build_tree (TState &,tree_desc *desc);

-void scan_tree (TState &,ct_data *tree, int max_code);

-void send_tree (TState &state,ct_data *tree, int max_code);

-int build_bl_tree (TState &);

-void send_all_trees (TState &state,int lcodes, int dcodes, int blcodes);

-void compress_block (TState &state,ct_data *ltree, ct_data *dtree);

-void set_file_type (TState &);

-void send_bits (TState &state, int value, int length);

-unsigned bi_reverse (unsigned code, int len);

-void bi_windup (TState &state);

-void copy_block (TState &state,char *buf, unsigned len, int header);

-

-

-#define send_code(state, c, tree) send_bits(state, tree[c].fc.code, tree[c].dl.len)

-// Send a code of the given tree. c and tree must not have side effects

-

-// alternatively...

-//#define send_code(state, c, tree)

-// { if (state.verbose>1) fprintf(stderr,"\ncd %3d ",(c));

-// send_bits(state, tree[c].fc.code, tree[c].dl.len); }

-

-#define d_code(dist) ((dist) < 256 ? state.ts.dist_code[dist] : state.ts.dist_code[256+((dist)>>7)])

-// Mapping from a distance to a distance code. dist is the distance - 1 and

-// must not have side effects. dist_code[256] and dist_code[257] are never used.

-

-#define Max(a,b) (a >= b ? a : b)

-/* the arguments must not have side effects */

-