<control lang="en" key="IDT_COLLECTING_RANDOM_DATA_NOTE">IMPORTANT: Move your mouse as randomly as possible within this window. The longer you move it, the better. This significantly increases the cryptographic strength of the encryption keys. Then click Next to continue.</control>

<control lang="tr" key="IDT_CONFIRM">&amp;Onayla:</control>

<control lang="tr" key="IDT_DONE">Bitti </control>

<control lang="tr" key="IDT_ENCRYPTION_ALGO">Şifreleme Algoritması</control>

<control lang="tr" key="IDT_FILESYSTEM">Dosya Sis.</control>

<control lang="en" key="IDT_FILE_CONTAINER">Creates a virtual encrypted disk within a file. Recommended for inexperienced users.</control>

<control lang="en" key="IDM_CREATE_HIDDEN_OS">Create Hidden Operating System...</control>

<control lang="en" key="IDM_CREATE_RESCUE_DISK">Create Rescue Disk...</control>

<control lang="tr" key="IDM_CREATE_VOLUME">Yeni Birim Oluştur...</control>

<control lang="tr" key="IDM_DEFAULT_KEYFILES">Varsayılan Anahtar Dosyaları...</control>

<control lang="en" key="IDM_DEFAULT_MOUNT_PARAMETERS">Default Mount Parameters...</control>

<control lang="en" key="IDM_DONATE">Donate now...</control>

<string lang="tr" key="ACCESS_DENIED">Hata: Erişim engellendi.\n\nErişmeye çalıştığınız aygıt ya 0 bayt uzunluğunda ya da önyükleme aygıtı.</string>

<string lang="en" key="ADMINISTRATOR">Administrator</string>

<string lang="tr" key="ADMIN_PRIVILEGES_DRIVER">VeraCrypt sürücüsünü yüklemek için, yönetici haklarına sahip bir hesaba oturum açmış olmalısınız.</string>

<string lang="tr" key="ADMIN_PRIVILEGES_WARN_HIDVOL">Gizli bir birim oluşturmak için yönetici haklarına sahip bir hesaba oturum açmanız gereklidir.\n\nDevam edilsin mi?</string>

<string lang="tr" key="ADMIN_PRIVILEGES_WARN_NTFS">Birimi NTFS olarak biçimlendirebilmek için yönetim haklarına sahip bir hesaba oturum açmanız gerektiğine dikkat edin.\n\nBirimi yönetim hakları olmadan FAT olarak biçimlendirebilirsiniz.</string>

<string lang="en" key="AES_HELP">FIPS-approved cipher (Rijndael, published in 1998) that may be used by U.S. government departments and agencies to protect classified information up to the Top Secret level. 256-bit key, 128-bit block, 14 rounds (AES-256). Mode of operation is XTS.</string>

<string lang="tr" key="FORMAT_FINISHED_HELP">\n\nVeraCrypt birimi oluşturuldu ve birim şu an kullanıma hazır. Başka bir VeraCrypt birimi oluşturmak istiyorsanız Sonraki'ye tıklayın. Aksi halde Çıkış'a tıklayın.</string>

<string lang="en" key="SYSENC_HIDDEN_VOL_FORMAT_FINISHED_HELP">\n\nThe hidden VeraCrypt volume has been successfully created (the hidden operating system will reside within this hidden volume).\n\nClick Next to continue.</string>

<string lang="en" key="NONSYS_INPLACE_ENC_FINISHED_TITLE">Volume Fully Encrypted</string>

<string lang="en" key="NONSYS_INPLACE_ENC_FINISHED_INFO">IMPORTANT: TO MOUNT THIS NEWLY CREATED VERACRYPT VOLUME AND TO ACCESS DATA STORED IN IT, CLICK 'Auto-Mount Devices' IN THE MAIN VERACRYPT WINDOW. After you enter the correct password (and/or supply correct keyfiles), the volume will be mounted to the drive letter you select from the list in the main VeraCrypt window (and you will be able to access the encrypted data via the selected drive letter).\n\nPLEASE REMEMBER OR WRITE DOWN THE ABOVE STEPS. YOU MUST FOLLOW THEM WHENEVER YOU WANT TO MOUNT THE VOLUME AND ACCESS DATA STORED IN IT. Alternatively, in the main VeraCrypt window, click 'Select Device', then select this partition/volume, and click 'Mount'.\n\nThe partition/volume has been successfully encrypted (it contains a fully encrypted VeraCrypt volume now) and is ready for use.</string>

<string lang="tr" key="FORMAT_FINISHED_INFO">VeraCrypt birimi başarıyla oluşturuldu.</string>

<string lang="tr" key="FORMAT_FINISHED_TITLE">Birim Oluşturuldu</string>

<string lang="en" key="FORMAT_HELP">IMPORTANT: Move your mouse as randomly as possible within this window. The longer you move it, the better. This significantly increases the cryptographic strength of the encryption keys. Then click Format to create the volume.</string>

<string lang="en" key="NODRIVER">Unable to connect to the VeraCrypt device driver. VeraCrypt cannot work if the device driver is not running.\n\nPlease note that, due to a Windows issue, it may be necessary to log off or restart the system before the device driver can be loaded.</string>

<string lang="tr" key="NOFONT">Yazı tiplerini yüklerken/hazırlarken hata oluştu.</string>

<string lang="en" key="NOT_FOUND">The drive letter was not found or no drive letter was specified.</string>

<string lang="tr" key="DRIVE_LETTER_UNAVAILABLE">Sürücü harfi kullanılabilir değil.</string>

<string lang="tr" key="NO_FILE_SELECTED">Dosya seçilmedi!</string>

<string lang="tr" key="NO_FREE_DRIVES">Hiçbir sürücü harfi mevcut değil.</string>

<string lang="en" key="OVERWRITEPROMPT">WARNING: The file '%hs' already exists!\n\nIMPORTANT: VERACRYPT WILL NOT ENCRYPT THE FILE, BUT IT WILL DELETE IT. Are you sure you want to delete the file and replace it with a new VeraCrypt container?</string>

<string lang="en" key="OVERWRITEPROMPT_DEVICE">CAUTION: ALL FILES CURRENTLY STORED ON THE SELECTED %s '%hs'%s WILL BE ERASED AND LOST (THEY WILL NOT BE ENCRYPTED)!\n\nAre you sure you want to proceed with format?</string>

<string lang="en" key="NONSYS_INPLACE_ENC_CONFIRM">WARNING: You will not be able to mount the volume or access any files stored on it until it has been fully encrypted.\n\nAre you sure you want to start encrypting the selected %s '%hs'%s?</string>

<string lang="en" key="NONSYS_INPLACE_ENC_CONFIRM_BACKUP">WARNING: Please note that if power supply is suddenly interrupted while encrypting existing data in place, or when the operating system crashes due to a software error or hardware malfunction while VeraCrypt is encrypting existing data in place, portions of the data will be corrupted or lost. Therefore, before you start encrypting, please make sure that you have backup copies of the files you want to encrypt.\n\nDo you have such a backup?</string>

<string lang="en" key="OVERWRITEPROMPT_DEVICE_HIDDEN_OS_PARTITION">CAUTION: ANY FILES CURRENTLY STORED ON THE PARTITION '%hs'%s (I.E. ON THE FIRST PARTITION BEHIND THE SYSTEM PARTITION) WILL BE ERASED AND LOST (THEY WILL NOT BE ENCRYPTED)!\n\nAre you sure you want to proceed with format?</string>

<string lang="en" key="OVERWRITEPROMPT_DEVICE_SECOND_WARNING_LOTS_OF_DATA">WARNING: THE SELECTED PARTITION CONTAINS A LARGE AMOUNT OF DATA! Any files stored on the partition will be erased and lost (they will NOT be encrypted)!</string>

<string lang="tr" key="PKCS5_PRF_CHANGED">Üstbilgi anahtarı türetme algoritması başarıyla ayarlandı.</string>

<string lang="en" key="NONSYS_INPLACE_ENC_RESUME_PASSWORD_PAGE_HELP">Please enter the password and/or keyfile(s) for the non-system volume where you want to resume the process of in-place encryption.\n\n\nRemark: After you click Next, VeraCrypt will attempt to find all non-system volumes where the process of encryption has been interrupted and where the VeraCrypt volume header can be decrypted using the supplied password and/or keyfile(s). If more than one such volume is found, you will need to select one of them in the next step.</string>

<string lang="en" key="NONSYS_INPLACE_ENC_RESUME_VOL_SELECT_HELP">Please select one of the listed volumes. The list contains every accessible non-system volume where the process of encryption has been interrupted and whose header could be decrypted using the supplied password and/or keyfile(s).</string>

<string lang="en" key="PASSWORD_HELP">It is very important that you choose a good password. You should avoid choosing one that contains only a single word that can be found in a dictionary (or a combination of 2, 3, or 4 such words). It should not contain any names or dates of birth. It should not be easy to guess. A good password is a random combination of upper and lower case letters, numbers, and special characters, such as @ ^ = $ * + etc. We recommend choosing a password consisting of more than 20 characters (the longer, the better). The maximum possible length is 64 characters.</string>

<string lang="tr" key="PASSWORD_HIDDENVOL_HELP">Lütfen gizli birim için bir parola seçin. </string>

<string lang="en" key="PASSWORD_HIDDEN_OS_HELP">Please choose a password for the hidden operating system (i.e. for the hidden volume). </string>

<string lang="en" key="HIDDEN_FILES_PRESENT_IN_KEYFILE_PATH">\n\nWARNING: Hidden file(s) have been found in a keyfile search path. Such hidden files cannot be used as keyfiles. If you need to use them as keyfiles, remove their 'Hidden' attribute (right-click each of them, select 'Properties', uncheck 'Hidden' and click OK). Note: Hidden files are visible only if the corresponding option is enabled (Computer &gt; Organize &gt; 'Folder and search options' &gt; View).</string>

<string lang="en" key="HIDDEN_VOL_PROT_PASSWORD_US_KEYB_LAYOUT">If you are attempting to protect a hidden volume containing a hidden system, please make sure you are using the standard US keyboard layout when typing the password for the hidden volume. This is required due to the fact that the password needs to be typed in the pre-boot environment (before Windows starts) where non-US Windows keyboard layouts are not available.</string>

<string lang="en" key="FOUND_NO_PARTITION_W_DEFERRED_INPLACE_ENC">VeraCrypt has not found any volume where non-system encryption has been interrupted and where the volume header can be decrypted using the supplied password and/or keyfile(s).\n\nPlease make sure the password and/or keyfile(s) are correct and that the partition/volume is not being used by the system or applications (including antivirus software).</string>

<string lang="en" key="SYSENC_MOUNT_WITHOUT_PBA_NOTE">\n\nNote: If you are attempting to mount a partition located on an encrypted system drive without pre-boot authentication or to mount the encrypted system partition of an operating system that is not running, you can do so by selecting 'System' &gt; 'Mount Without Pre-Boot Authentication'.</string>

<string lang="en" key="MOUNT_WITHOUT_PBA_VOL_ON_ACTIVE_SYSENC_DRIVE">In this mode, you cannot mount a partition located on a drive whose portion is within the key scope of active system encryption.\n\nBefore you can mount this partition in this mode, you need to either boot an operating system installed on a different drive (encrypted or unencrypted) or boot an unencrypted operating system.</string>

<string lang="en" key="PREV">&lt; &amp;Back</string>

<string lang="tr" key="RAWDEVICES">Sisteminizde yüklü ham sürücüler listelenemiyor!</string>

<string lang="tr" key="READONLYPROMPT">Birim '%hs' bulunuyor ve salt okunur. Değiştirmek istediğinizden emin misiniz?</string>

<string lang="en" key="FOR_MORE_INFO_ON_PARTITIONS">For information on how to create and manage partitions, please refer to the documentation supplied with your operating system or contact your computer vendor's technical support team for assistance.</string>

<string lang="en" key="SYSTEM_PARTITION_NOT_ACTIVE">Error: The currently running operating system is not installed on the boot partition (first Active partition). This is not supported.</string>

<string lang="en" key="CONFIRM_FAT_FOR_FILES_OVER_4GB">You indicated that you intend to store files larger than 4 GB in this VeraCrypt volume. However, you chose the FAT file system, on which files larger than 4 GB cannot be stored.\n\nAre you sure you want to format the volume as FAT?</string>

<string lang="tr" key="CANT_ACCESS_VOL">Hata: Birime erişilemiyor!\n\nSeçili birimin var olduğundan, bağlı olmadığından veya sistem veya bir uygulama tarafından kullanımda olmadığından, birim için okuma/yazma izinlerine sahip olduğunuzdan ve bunun yazma korumalı olmadığından emin olun.</string>

<string lang="en" key="INPLACE_ENC_CANT_ACCESS_OR_GET_INFO_ON_VOL">Error: Cannot access the volume and/or obtain information about the volume.\n\nMake sure that the selected volume exists, that it is not being used by the system or applications, that you have read/write permission for the volume, and that it is not write-protected.</string>

<string lang="en" key="INPLACE_ENC_CANT_ACCESS_OR_GET_INFO_ON_VOL_ALT">Error: Cannot access the volume and/or obtain information about the volume. Make sure that the selected volume exists, that it is not being used by the system or applications, that you have read/write permission for the volume, and that it is not write-protected.\n\nIf the problem persists, it might help to follow the below steps.</string>

<string lang="en" key="INPLACE_ENC_GENERIC_ERR_ALT_STEPS">An error prevented VeraCrypt from encrypting the partition. Please try fixing any previously reported problems and then try again. If the problems persist, it might help to follow the below steps.</string>

<string lang="en" key="INPLACE_ENC_GENERIC_ERR_RESUME">An error prevented VeraCrypt from resuming the process of encryption of the partition.\n\nPlease try fixing any previously reported problems and then try resuming the process again. Note that the volume cannot be mounted until it has been fully encrypted.</string>

<string lang="tr" key="CANT_DISMOUNT_OUTER_VOL">Hata: Dış birimin bağlantısı kesilemiyor!\n\nBirim bağlantısı, birim bir program veya sistem tarafından kullanılan dosya veya klasörler içerdiğinde kesilemez.\n\nLütfen birim üzerindeki dosyaları veya dizinleri kullanabilecek tüm programları kapatın ve Yeniden Dene'ye tıklayın.</string>

<string lang="en" key="CANT_GET_OUTER_VOL_INFO">Error: Cannot obtain information about the outer volume!\nVolume creation cannot continue.</string>

<string lang="tr" key="CANT_ACCESS_OUTER_VOL">Hata: Dış birime erişilemiyor! Birim oluşturma devam edemiyor.</string>

<string lang="en" key="TC_INSTALLER_IS_RUNNING">VeraCrypt Installer is currently running on this system and performing or preparing installation or update of VeraCrypt. Before you proceed, please wait for it to finish or close it. If you cannot close it, please restart your computer before proceeding.</string>

<string lang="en" key="INSTALL_FAILED">Installation failed.</string>

<string lang="en" key="UNINSTALL_FAILED">Uninstallation failed.</string>

<string lang="en" key="CANNOT_WRITE_FILE_X">Cannot write file %hs</string>

<string lang="en" key="EXTRACTING_VERB">Extracting</string>

<string lang="en" key="CANNOT_READ_FROM_PACKAGE">Cannot read data from the package.</string>

<string lang="en" key="CONFIRM_EXIT_UNIVERSAL">Exit?</string>

<string lang="en" key="CHOOSE_ENCRYPT_OR_DECRYPT">VeraCrypt does not have sufficient information to determine whether to encrypt or decrypt.</string>

<string lang="en" key="CHOOSE_ENCRYPT_OR_DECRYPT_FINALIZE_DECRYPT_NOTE">VeraCrypt does not have sufficient information to determine whether to encrypt or decrypt.\n\nNote: If you decrypted the system partition/drive in the pre-boot environment, you may need to finalize the process by clicking Decrypt.</string>

<string lang="en" key="NONSYS_INPLACE_ENC_DEFER_CONFIRM">Do you want to interrupt and postpone the process of encryption of the partition/volume?\n\nNote: Keep in mind that the volume cannot be mounted until it has been fully encrypted. You will be able to resume the process of encryption and it will continue from the point it was stopped. You can do so, for example, by selecting 'Volumes' &gt; 'Resume Interrupted Process' from the menu bar of the main VeraCrypt window.</string>

<string lang="en" key="SYSTEM_ENCRYPTION_DEFER_CONFIRM">Do you want to interrupt and postpone the process of encryption of the system partition/drive?\n\nNote: You will be able to resume the process and it will continue from the point it was stopped. You can do so, for example, by selecting 'System' &gt; 'Resume Interrupted Process' from the menu bar of the main VeraCrypt window. If you want to permanently terminate or reverse the encryption process, select 'System' &gt; 'Permanently Decrypt System Partition/Drive'.</string>

<string lang="en" key="SYSTEM_DECRYPTION_DEFER_CONFIRM">Do you want to interrupt and postpone the process of decryption of the system partition/drive?\n\nNote: You will be able to resume the process and it will continue from the point it was stopped. You can do so, for example, by selecting 'System' &gt; 'Resume Interrupted Process' from the menu bar of the main VeraCrypt window. If you want to reverse the decryption process (and start encrypting), select 'System' &gt; 'Encrypt System Partition/Drive'.</string>

<string lang="en" key="FAILED_TO_START_WIPING">Error: Failed to start the process of wiping.</string>

<string lang="en" key="INCONSISTENCY_RESOLVED">Inconsistency resolved.\n\n\n(If you report a bug in connection with this, please include the following technical information in the bug report:\n%hs)</string>

<string lang="en" key="UNEXPECTED_STATE">Error: Unexpected state.\n\n\n(If you report a bug in connection with this, please include the following technical information in the bug report:\n%hs)</string>

<string lang="en" key="NOTHING_TO_RESUME">There is no process/task to resume.</string>

<string lang="tr" key="HIDVOL_PROT_BKG_TASK_WARNING">UYARI: VeraCrypt Arkaplan Görevi devre dışı. VeraCrypt'ten çıktıktan sonra, gizli birimin hasardan korunduğuna dair uyarılmayacaksınız.\n\nUyarı: Arkaplan Görevini istediğiniz zaman sistem uyarı alanındaki VeraCrypt simgesine sağ tıklayıp, 'Çıkış'ı seçerek kapatabilirsiniz.\n\nVeraCrypt Arkaplan Görevi etkinleştirilsin mi?</string>

<string lang="tr" key="LANG_PACK_VERSION">Dil paketi versiyonu: %s</string>

<string lang="en" key="SYS_ENCRYPTION_PRETEST_RESULT_INFO">The pretest has been successfully completed.\n\nWARNING: Please note that if power supply is suddenly interrupted while encrypting existing data in place, or when the operating system crashes due to a software error or hardware malfunction while VeraCrypt is encrypting existing data in place, portions of the data will be corrupted or lost. Therefore, before you start encrypting, please make sure that you have backup copies of the files you want to encrypt. If you do not, please back up the files now (you can click Defer, back up the files, then run VeraCrypt again anytime, and select 'System' &gt; 'Resume Interrupted Process' to start encrypting).\n\nWhen ready, click Encrypt to start encrypting.</string>

<string lang="en" key="SYSENC_ENCRYPTION_PAGE_INFO">You can click Pause or Defer anytime to interrupt the process of encryption or decryption, exit this wizard, restart or shut down your computer, and then resume the process, which will continue from the point it was stopped. To prevent slowdown when the system or applications write or read data from the system drive, VeraCrypt automatically waits until the data is written or read (see Status above) and then automatically continues encrypting or decrypting.</string>

<string lang="en" key="NONSYS_INPLACE_ENC_ENCRYPTION_PAGE_INFO">\n\nYou can click Pause or Defer anytime to interrupt the process of encryption, exit this wizard, restart or shut down your computer, and then resume the process, which will continue from the point it was stopped. Note that the volume cannot be mounted until it has been fully encrypted.</string>

<string lang="en" key="SYSENC_HIDDEN_OS_INITIAL_INFO_TITLE">Hidden System Started</string>

<string lang="en" key="SYSENC_HIDDEN_OS_WIPE_INFO_TITLE">Original System</string>

<string lang="en" key="SYSENC_HIDDEN_OS_WIPE_INFO">Windows creates (typically, without your knowledge or consent) various log files, temporary files, etc., on the system partition. It also saves the content of RAM to hibernation and paging files located on the system partition. Therefore, if an adversary analyzed files stored on the partition where the original system (of which the hidden system is a clone) resides, he might find out, for example, that you used the VeraCrypt wizard in the hidden-system-creation mode (which might indicate the existence of a hidden operating system on your computer).\n\nTo prevent such issues, VeraCrypt will, in the next steps, securely erase the entire content of the partition where the original system resides. Afterwards, in order to achieve plausible deniability, you will need to install a new system on the partition and encrypt it. Thus you will create the decoy system and the whole process of creation of the hidden operating system will be completed.</string>

<string lang="en" key="HIDDEN_OS_CREATION_PREINFO_HELP">In the next steps, VeraCrypt will create the hidden operating system by copying the content of the system partition to the hidden volume (data being copied will be encrypted on the fly with an encryption key different from the one that will be used for the decoy operating system).\n\nPlease note that the process will be performed in the pre-boot environment (before Windows starts) and it may take a long time to complete; several hours or even several days (depending on the size of the system partition and on the performance of your computer).\n\nYou will be able to interrupt the process, shut down your computer, start the operating system and then resume the process. However, if you interrupt it, the entire process of copying the system will have to start from the beginning (because the content of the system partition must not change during cloning).</string>

<string lang="en" key="CONFIRM_CANCEL_HIDDEN_OS_CREATION">Do you want to cancel the entire process of creation of the hidden operating system?\n\nNote: You will NOT be able to resume the process if you cancel it now.</string>

<string lang="en" key="CONFIRM_CANCEL_SYS_ENC_PRETEST">Do you want to cancel the system encryption pretest?</string>

<string lang="en" key="SYS_DRIVE_NOT_ENCRYPTED">The system partition/drive does not appear to be encrypted (neither partially nor fully).</string>

<string lang="en" key="SETUP_FAILED_BOOT_DRIVE_ENCRYPTED">Your system partition/drive is encrypted (partially or fully).\n\nPlease decrypt your system partition/drive entirely before proceeding. To do so, select 'System' &gt; 'Permanently Decrypt System Partition/Drive' from the menu bar of the main VeraCrypt window.</string>

<string lang="en" key="SETUP_FAILED_BOOT_DRIVE_ENCRYPTED_DOWNGRADE">When the system partition/drive is encrypted (partially or fully), you cannot downgrade VeraCrypt (but you can upgrade it or reinstall the same version).</string>

<string lang="en" key="CONFIRM_SYSTEM_ENCRYPTION_MODE">You have selected the system partition/drive (or the boot partition), but the wizard mode you selected is suitable only for non-system partitions/drives.\n\nDo you want to set up pre-boot authentication (which means that you will need to enter your password each time before Windows boots/starts) and encrypt the system partition/drive?</string>

<string lang="en" key="CONFIRM_DECRYPT_SYS_DEVICE">Are you sure you want to permanently decrypt the system partition/drive?</string>

<string lang="en" key="CONFIRM_DECRYPT_SYS_DEVICE_CAUTION">CAUTION: If you permanently decrypt the system partition/drive, unencrypted data will be written to it.\n\nAre you really sure you want to permanently decrypt the system partition/drive?</string>

<string lang="en" key="CONFIRM_CASCADE_FOR_SYS_ENCRYPTION">Warning: If you use a cascade of ciphers for system encryption, you may encounter the following issues:\n\n1) The VeraCrypt Boot Loader is larger than normal and, therefore, there is not enough space in the first drive track for a backup of the VeraCrypt Boot Loader. Hence, whenever it gets damaged (which often happens, for example, during inappropriately designed anti-piracy activation procedures of certain programs), you will need to use the VeraCrypt Rescue Disk to boot or to repair the VeraCrypt Boot Loader.\n\n2) On some computers, resuming from hibernation takes longer.\n\nThese potential issues can be prevented by choosing a non-cascade encryption algorithm (e.g. AES).\n\nAre you sure you want to use a cascade of ciphers?</string>

<string lang="en" key="NOTE_CASCADE_FOR_SYS_ENCRYPTION">If you encounter any of the previously described problems, decrypt the partition/drive (if it is encrypted) and then try encrypting it again using a non-cascade encryption algorithm (e.g. AES).</string>

<string lang="en" key="UPDATE_TC_IN_DECOY_OS_FIRST">WARNING: For safety and security reasons, you should update VeraCrypt on the decoy operating system before you update it on the hidden operating system.\n\nTo do so, boot the decoy system and run the VeraCrypt installer from within it. Then boot the hidden system and run the installer from within it as well.\n\nNote: The decoy system and the hidden system share a single boot loader. If you upgraded VeraCrypt only on the hidden system (but not on the decoy system), the decoy system would contain a VeraCrypt driver and VeraCrypt applications whose version numbers are different from the version number of the VeraCrypt Boot Loader. Such a discrepancy might indicate that there is a hidden operating system on this computer.\n\n\nDo you want to continue?</string>

<string lang="en" key="ENABLE_BAD_SECTOR_ZEROING">Error: Content of one or more sectors on the disk cannot be read (probably due to a physical defect).\n\nThe process of in-place encryption can continue only when the sectors have been made readable again. VeraCrypt can attempt to make these sectors readable by writing zeros to the sectors (subsequently such all-zero blocks would be encrypted). However, note that any data stored in the unreadable sectors will be lost. If you want to avoid that, you can attempt to recover portions of the corrupted data using appropriate third-party tools.\n\nNote: In case of physically damaged sectors (as opposed to mere data corruption and checksum errors) most types of storage devices internally reallocate the sectors when data is attempted to be written to them (so the existing data in the damaged sectors may remain unencrypted on the drive).\n\nDo you want VeraCrypt to write zeroes to unreadable sectors?</string>

<string lang="en" key="DISCARD_UNREADABLE_ENCRYPTED_SECTORS">Error: Content of one or more sectors on the disk cannot be read (probably due to a physical defect).\n\nTo be able to proceed with decryption, VeraCrypt will have to discard the content of the unreadable sectors (the content will be replaced with pseudorandom data). Please note that, before proceeding, you can attempt to recover portions of any corrupted data using appropriate third-party tools.\n\nDo you want VeraCrypt to discard data in the unreadable sectors now?</string>

<string lang="en" key="ZEROED_BAD_SECTOR_COUNT">Note: VeraCrypt has replaced the content of %I64d unreadable sectors (%s) with encrypted all-zero plaintext blocks.</string>

<string lang="en" key="ENTER_TOKEN_PASSWORD">Enter password/PIN for token '%s':</string>

<string lang="en" key="PKCS11_LIB_LOCATION_HELP">In order to allow VeraCrypt to access a security token or smart card, you need to install a PKCS #11 software library for the token or smart card first. Such a library may be supplied with the device or it may be available for download from the website of the vendor or other third parties.\n\nAfter you install the library, you can either select it manually by clicking 'Select Library' or you can let VeraCrypt find and select it automatically by clicking 'Auto-Detect Library' (only the Windows system directory will be searched).</string>

<string lang="en" key="SELECT_PKCS11_MODULE_HELP">Note: For the filename and location of the PKCS #11 library installed for your security token or smart card, please refer to the documentation supplied with the token, card, or third-party software.\n\nClick 'OK' to select the path and filename.</string>