diff options
Diffstat (limited to 'src/Crypto/Sha1.c')
| -rw-r--r-- | src/Crypto/Sha1.c | 282 |
1 files changed, 0 insertions, 282 deletions
diff --git a/src/Crypto/Sha1.c b/src/Crypto/Sha1.c deleted file mode 100644 index d2e451c6..00000000 --- a/src/Crypto/Sha1.c +++ /dev/null @@ -1,282 +0,0 @@ -/* Deprecated/legacy */
-
-/*
- ---------------------------------------------------------------------------
- Copyright (c) 2002, Dr Brian Gladman, Worcester, UK. All rights reserved.
-
- LICENSE TERMS
-
- The free distribution and use of this software is allowed (with or without
- changes) provided that:
-
- 1. source code distributions include the above copyright notice, this
- list of conditions and the following disclaimer;
-
- 2. binary distributions include the above copyright notice, this list
- of conditions and the following disclaimer in their documentation;
-
- 3. the name of the copyright holder is not used to endorse products
- built using this software without specific written permission.
-
- DISCLAIMER
-
- This software is provided 'as is' with no explicit or implied warranties
- in respect of its properties, including, but not limited to, correctness
- and/or fitness for purpose.
- ---------------------------------------------------------------------------
- Issue Date: 18/06/2004
-
- This is a byte oriented version of SHA1 that operates on arrays of bytes
- stored in memory.
-*/
-
-/* Adapted for TrueCrypt */
-
-#include <string.h> /* for memcpy() etc. */
-#include <stdlib.h> /* for _lrotl with VC++ */
-
-#include "Sha1.h"
-
-#if defined(__cplusplus)
-extern "C"
-{
-#endif
-
-/*
- To obtain the highest speed on processors with 32-bit words, this code
- needs to determine the order in which bytes are packed into such words.
- The following block of code is an attempt to capture the most obvious
- ways in which various environemnts specify their endian definitions.
- It may well fail, in which case the definitions will need to be set by
- editing at the points marked **** EDIT HERE IF NECESSARY **** below.
-*/
-
-/* PLATFORM SPECIFIC INCLUDES */
-
-/* Original byte order detection removed */
-#include "../Common/Endian.h"
-
-#define BRG_LITTLE_ENDIAN 1234 /* byte 0 is least significant (i386) */
-#define BRG_BIG_ENDIAN 4321 /* byte 0 is most significant (mc68k) */
-
-#if BYTE_ORDER == LITTLE_ENDIAN
-# define PLATFORM_BYTE_ORDER BRG_LITTLE_ENDIAN
-#endif
-
-#if BYTE_ORDER == BIG_ENDIAN
-# define PLATFORM_BYTE_ORDER BRG_BIG_ENDIAN
-#endif
-
-#ifdef _MSC_VER
-#pragma intrinsic(memcpy)
-#endif
-
-#if 1 && defined(_MSC_VER) && !defined(_DEBUG)
-#define rotl32 _rotl
-#define rotr32 _rotr
-#else
-#define rotl32(x,n) (((x) << n) | ((x) >> (32 - n)))
-#define rotr32(x,n) (((x) >> n) | ((x) << (32 - n)))
-#endif
-
-#if !defined(bswap_32)
-#define bswap_32(x) ((rotr32((x), 24) & 0x00ff00ff) | (rotr32((x), 8) & 0xff00ff00))
-#endif
-
-#if (PLATFORM_BYTE_ORDER == BRG_LITTLE_ENDIAN)
-#define SWAP_BYTES
-#else
-#undef SWAP_BYTES
-#endif
-
-#if defined(SWAP_BYTES)
-#define bsw_32(p,n) \
- { int _i = (n); while(_i--) ((sha1_32t*)p)[_i] = bswap_32(((sha1_32t*)p)[_i]); }
-#else
-#define bsw_32(p,n)
-#endif
-
-#define SHA1_MASK (SHA1_BLOCK_SIZE - 1)
-
-#if 0
-
-#define ch(x,y,z) (((x) & (y)) ^ (~(x) & (z)))
-#define parity(x,y,z) ((x) ^ (y) ^ (z))
-#define maj(x,y,z) (((x) & (y)) ^ ((x) & (z)) ^ ((y) & (z)))
-
-#else /* Discovered by Rich Schroeppel and Colin Plumb */
-
-#define ch(x,y,z) ((z) ^ ((x) & ((y) ^ (z))))
-#define parity(x,y,z) ((x) ^ (y) ^ (z))
-#define maj(x,y,z) (((x) & (y)) | ((z) & ((x) ^ (y))))
-
-#endif
-
-/* Compile 64 bytes of hash data into SHA1 context. Note */
-/* that this routine assumes that the byte order in the */
-/* ctx->wbuf[] at this point is in such an order that low */
-/* address bytes in the ORIGINAL byte stream will go in */
-/* this buffer to the high end of 32-bit words on BOTH big */
-/* and little endian systems */
-
-#ifdef ARRAY
-#define q(v,n) v[n]
-#else
-#define q(v,n) v##n
-#endif
-
-#define one_cycle(v,a,b,c,d,e,f,k,h) \
- q(v,e) += rotr32(q(v,a),27) + \
- f(q(v,b),q(v,c),q(v,d)) + k + h; \
- q(v,b) = rotr32(q(v,b), 2)
-
-#define five_cycle(v,f,k,i) \
- one_cycle(v, 0,1,2,3,4, f,k,hf(i )); \
- one_cycle(v, 4,0,1,2,3, f,k,hf(i+1)); \
- one_cycle(v, 3,4,0,1,2, f,k,hf(i+2)); \
- one_cycle(v, 2,3,4,0,1, f,k,hf(i+3)); \
- one_cycle(v, 1,2,3,4,0, f,k,hf(i+4))
-
-void sha1_compile(sha1_ctx ctx[1])
-{ sha1_32t *w = ctx->wbuf;
-
-#ifdef ARRAY
- sha1_32t v[5];
- memcpy(v, ctx->hash, 5 * sizeof(sha1_32t));
-#else
- sha1_32t v0, v1, v2, v3, v4;
- v0 = ctx->hash[0]; v1 = ctx->hash[1];
- v2 = ctx->hash[2]; v3 = ctx->hash[3];
- v4 = ctx->hash[4];
-#endif
-
-#define hf(i) w[i]
-
- five_cycle(v, ch, 0x5a827999, 0);
- five_cycle(v, ch, 0x5a827999, 5);
- five_cycle(v, ch, 0x5a827999, 10);
- one_cycle(v,0,1,2,3,4, ch, 0x5a827999, hf(15)); \
-
-#undef hf
-#define hf(i) (w[(i) & 15] = rotl32( \
- w[((i) + 13) & 15] ^ w[((i) + 8) & 15] \
- ^ w[((i) + 2) & 15] ^ w[(i) & 15], 1))
-
- one_cycle(v,4,0,1,2,3, ch, 0x5a827999, hf(16));
- one_cycle(v,3,4,0,1,2, ch, 0x5a827999, hf(17));
- one_cycle(v,2,3,4,0,1, ch, 0x5a827999, hf(18));
- one_cycle(v,1,2,3,4,0, ch, 0x5a827999, hf(19));
-
- five_cycle(v, parity, 0x6ed9eba1, 20);
- five_cycle(v, parity, 0x6ed9eba1, 25);
- five_cycle(v, parity, 0x6ed9eba1, 30);
- five_cycle(v, parity, 0x6ed9eba1, 35);
-
- five_cycle(v, maj, 0x8f1bbcdc, 40);
- five_cycle(v, maj, 0x8f1bbcdc, 45);
- five_cycle(v, maj, 0x8f1bbcdc, 50);
- five_cycle(v, maj, 0x8f1bbcdc, 55);
-
- five_cycle(v, parity, 0xca62c1d6, 60);
- five_cycle(v, parity, 0xca62c1d6, 65);
- five_cycle(v, parity, 0xca62c1d6, 70);
- five_cycle(v, parity, 0xca62c1d6, 75);
-
-#ifdef ARRAY
- ctx->hash[0] += v[0]; ctx->hash[1] += v[1];
- ctx->hash[2] += v[2]; ctx->hash[3] += v[3];
- ctx->hash[4] += v[4];
-#else
- ctx->hash[0] += v0; ctx->hash[1] += v1;
- ctx->hash[2] += v2; ctx->hash[3] += v3;
- ctx->hash[4] += v4;
-#endif
-}
-
-void sha1_begin(sha1_ctx ctx[1])
-{
- ctx->count[0] = ctx->count[1] = 0;
- ctx->hash[0] = 0x67452301;
- ctx->hash[1] = 0xefcdab89;
- ctx->hash[2] = 0x98badcfe;
- ctx->hash[3] = 0x10325476;
- ctx->hash[4] = 0xc3d2e1f0;
-}
-
-/* SHA1 hash data in an array of bytes into hash buffer and */
-/* call the hash_compile function as required. */
-
-void sha1_hash(const unsigned char data[], unsigned __int32 len, sha1_ctx ctx[1])
-{ sha1_32t pos = (sha1_32t)(ctx->count[0] & SHA1_MASK),
- space = SHA1_BLOCK_SIZE - pos;
- const unsigned char *sp = data;
-
- if((ctx->count[0] += len) < len)
- ++(ctx->count[1]);
-
- while(len >= space) /* tranfer whole blocks if possible */
- {
- memcpy(((unsigned char*)ctx->wbuf) + pos, sp, space);
- sp += space; len -= space; space = SHA1_BLOCK_SIZE; pos = 0;
- bsw_32(ctx->wbuf, SHA1_BLOCK_SIZE >> 2);
- sha1_compile(ctx);
- }
-
- memcpy(((unsigned char*)ctx->wbuf) + pos, sp, len);
-}
-
-/* SHA1 final padding and digest calculation */
-
-void sha1_end(unsigned char hval[], sha1_ctx ctx[1])
-{ sha1_32t i = (sha1_32t)(ctx->count[0] & SHA1_MASK);
-
- /* put bytes in the buffer in an order in which references to */
- /* 32-bit words will put bytes with lower addresses into the */
- /* top of 32 bit words on BOTH big and little endian machines */
- bsw_32(ctx->wbuf, (i + 3) >> 2);
-
- /* we now need to mask valid bytes and add the padding which is */
- /* a single 1 bit and as many zero bits as necessary. Note that */
- /* we can always add the first padding byte here because the */
- /* buffer always has at least one empty slot */
- ctx->wbuf[i >> 2] &= 0xffffff80 << 8 * (~i & 3);
- ctx->wbuf[i >> 2] |= 0x00000080 << 8 * (~i & 3);
-
- /* we need 9 or more empty positions, one for the padding byte */
- /* (above) and eight for the length count. If there is not */
- /* enough space, pad and empty the buffer */
- if(i > SHA1_BLOCK_SIZE - 9)
- {
- if(i < 60) ctx->wbuf[15] = 0;
- sha1_compile(ctx);
- i = 0;
- }
- else /* compute a word index for the empty buffer positions */
- i = (i >> 2) + 1;
-
- while(i < 14) /* and zero pad all but last two positions */
- ctx->wbuf[i++] = 0;
-
- /* the following 32-bit length fields are assembled in the */
- /* wrong byte order on little endian machines but this is */
- /* corrected later since they are only ever used as 32-bit */
- /* word values. */
- ctx->wbuf[14] = (ctx->count[1] << 3) | (ctx->count[0] >> 29);
- ctx->wbuf[15] = ctx->count[0] << 3;
- sha1_compile(ctx);
-
- /* extract the hash value as bytes in case the hash buffer is */
- /* misaligned for 32-bit words */
- for(i = 0; i < SHA1_DIGEST_SIZE; ++i)
- hval[i] = (unsigned char)(ctx->hash[i >> 2] >> (8 * (~i & 3)));
-}
-
-void sha1(unsigned char hval[], const unsigned char data[], unsigned __int32 len)
-{ sha1_ctx cx[1];
-
- sha1_begin(cx); sha1_hash(data, len, cx); sha1_end(hval, cx);
-}
-
-#if defined(__cplusplus)
-}
-#endif
|